RCA P50 Bedienungsanleitung
Mini Projector User’s Guide
Model P50
Please read this manual before
1
Table of Contents
1. Table of Contents---------------------------------1
2. Warnings-----------------------------------------2
3. Accessories---------------------------------------4
4. Overview-----------------------------------------5
5. Remote Control Functions-------------------------6
6. General Operation---------------------------------7
a. Startup and Shutdown------------------------7
b. Positioning-----------------------------------7
8------- ----------------------ecnatsiDworhT/sucoF.c
d. A/V Input------------------------------------9
9------ ----------------------------------tupnIAGV.e
7. Settings Menu------------------------------------10
9. Maintenance-------------------------------------12
10. Trouble Shooting---------------------------------13
11. Other--------------------------------------------14
12. Warranty----------------------------------------15-17
2
WARNINGS
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Observe all warnings.
4. Follow all instructions.
5. Do not use the projector near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Use in accordance
with the manufacturer’s instructions.
8. Do not use near any heat sources such as laptops, radiators, heat
that produce heat.
9. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Unplug the projector during lightning storms or when
unused for long periods of time.
10
Warning: To reduce the risk of electric shock, do not remove
the cover or back, do not expose the projector to rain or
moisture. There are no user- serviceable parts inside. Refer
3
required when the projector has been damaged in any way,
such as when a power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the projector, the
projector has been exposed to rain or moisture, does not
operate normally, or has been dropped.
13. The projector should not be exposed to dripping or splashing
placed on the projector.
14. The projector should be used in a well ventilated area to prevent
overheating.
should
12.
4
Accessories
Remote Control Power Adapter
Composite A/V Cable VGA Cable
Carrying Bag Rubber Stand
5
Lens
Focus Adjustment
Overview
Front View
Rear View
Power Button
Power Supply
Receptacle
A/V Input
VGA Input
Switching signal source
Volume Up/ /
Horizontal/Mirror image
Menu/Enter
Volume Down/ /
6
Menu=Enter, Ok
Volume Up
Volume Down
Exit
Mute Sound
Horizontal
Mirror Image
Remote Control Functions
Switch Signal Source
7
Horizontal Alignment
Vertical Alignment
General Operation
Startup and Shutdown
Startup - Connect the power supply or external battery to the rear
power receptacle. Press the power button to turn on.
Shutdown - Press the power button, and the optical engine will
unit. Please do not unplug the projector until fan has stopped.
Positioning
Position projector level with the wall, screen or other surface on which you
will projecting the image. Make sure the projector is at a right angle to the
wall or screen, or the image will appear distorted.
Power Button
Power Receptacle
8
us
t nt
Diagonal
size
(inch)
Vertical
size
(mm)
Horizontal
size
(mm)
Throw
distance
(mm)
30
40
50
60
70
80
90
100
1016
1270
1524
1778
2032
2286
2540
762
610
762
914
1067
1219
1372
1524
457
813
1016
1219
1422
1626
1829
2032
610
1666
2083
2499
2916
3332
3749
4166
1250
Diagonal
size
(mm)
Focus Adjustment/Throw Distance
The focus can be adjusted by turning the wheel located at the front of the
projector. The projector is capable of the following throw and focus
distances:
Focus
Adjustment
Focus Dial
9
INSERT CABLE INTO
3.5MM A/V PORT AS SHOWN
A/V Input
The Projector contains an A/V (Audio/Video) line-in port. You can connect
to any device which comes with A/V output function. These sources are
connected through a 3.5mm A/V cable (Included).
To connect with an A/V cable, insert the 3.5mm portion into the A/V port
of the projector. Press the power button and the projector will initialize.
VGA Connection
An extended desktop screen will be displayed when connecting to any
device with a standard VGA display port (15 pin).
Inhaltsverzeichnis
Andere RCA Projektor Handbücher
RCA
RCA RPJ300 COMBO-BLK Bedienungsanleitung
RCA
RCA PJ28BT Bedienungsanleitung
RCA
RCA RPJ167 Bedienungsanleitung
RCA
RCA RPJ402 Bedienungsanleitung
RCA
RCA RPJ116-PLUS Bedienungsanleitung
RCA
RCA RPJ143-50DISP Bedienungsanleitung
RCA
RCA P50M Bedienungsanleitung
RCA
RCA RPJ060 Bedienungsanleitung
RCA
RCA RPJ116 Bedienungsanleitung
RCA
RCA RPJ275 Bedienungsanleitung
RCA
RCA RPJ119 Bedienungsanleitung
RCA
RCA RPJ116-B-PLUS Bedienungsanleitung
RCA
RCA RPJ104 Bedienungsanleitung
RCA
RCA RPJ112 Bedienungsanleitung
RCA
RCA RPJ129 Bedienungsanleitung
RCA
RCA RPJ133_24DISP Bedienungsanleitung
RCA
RCA RPJ104 Bedienungsanleitung
RCA
RCA RPJ065 Bedienungsanleitung
RCA
RCA RPJ106 Bedienungsanleitung
RCA
RCA RPJ135 Bedienungsanleitung
Beliebte Projektor Handbücher anderer Marken
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung
NEC
NEC NP600S EDU Bedienungsanleitung
BenQ
BenQ SH753P Bedienungsanleitung
Eiki
Eiki EK-623U series Bedienungsanleitung
Epson
Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung
Epson
Epson PowerLite Home Cinema 705HD Bedienungsanleitung
