RCA VR663HF Bedienungsanleitung

VCR OWNER’S

MODEL v ;..

;.$

‘.,I(

9 1’.$

Important Information

This symbol

indicates

“dangerous

voltage- inside

tile

product

that

presents

a risk

electric Shock

or,

personal injuv.

This

symbol indicates important

instructions accompanfing the

produa.

WARNING

TO prevent fire 01 shock hazard, do not expose this VCR to rain

or moisture.

CAUTION: To prevent &chic shock, match wide blade of plug

to wide slot, fully insert,

MISE EN GARDE: Pour eviter les chocs &ctliques, introduire

la lame la plus large de la fiche dans la borne correspondante de

la prise et pousser jusqG au fond.

Cautions

Do not defeat the safety feature of the plug. The wide blade fits into the wall

socket only one way. If you need an extension cord, make sure it matches the

plug of the VCR.

Operate VCR only on 120 volts, 60 Hz AC power

(normal house

power).

For safety reasons, make sure any equipment or accessories connected to this

product bears the UL listing mark or, if purchased and used in Canada, the CSA

certification mark. If in doubt, contact qualified service personnel.

FCC Regulations state that unauthorized changes or modifications to this

equipment may void the user’s authority to operate it.

Note To Cable TV Installer

This reminder is provided to call your attention to Article 8X-40 of the National

Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which

provides guidelines for proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding system of the building as

close to the point of cable entry as practical.

Product Registration

Please fill out the product registration card and return it immediately.

Returning this card allows us to contact you if needed.

Keep your sales receipt to obtain warranty parts and service and for proof

of purchase. Attach it here and record the serial and model numbers in

case you need them. The numbers are located on the back of the VCR.

Model No. VR663HF

Serial No.

Purchase Date:

Dealer/Address/Phone:

11111

Table of Contents

Important Information

Warnings, Cautions, Note to Cable TV Installer

Product Registration

Hooking Up the VCR

Choosing a Hookup 2

Antenna 01 Cable System Without a Cable Box 3

Cable System With Cable Box to Unscramble AU Channels 4

Cable System With Cable Box to Unscramble Pay Channels 5

Connecting Two VCRs for Copying Tapes 6

Connecting a Stereo Amplifier/Receiver 7

Setting Up the VCR

startup

Check Accessories With VCR

Attach Power Cord to VCR

Insert Batteries in Remote

Turn on TV and VCR

Place Channels in VCR’s Memory

Add OI Erase Channels from VCR’s Memory

Use N/VCR Button

Set the Time and Date

Using the Remote Control

Compor

lent

Buttons 10

KU Function Buttons K-11

TV Function Buttons 10-11

Controlling a VCR 12

Controlling a TV 12

Playing a Tape

Operating Instructions

Using the Playback Feahmes

Pause for Stop-Action

Slow Motion

Picture Search

Frame Advance and Commercial Scan

Time Search

Pro-Tect Plus=’ Locking Featire

Time Counter with Memory-Stop Feature

AUDIO PLAY Feature

Auto Tracking and Manual Tracking

Recording a rrogram

Types of Recordings

Recording Speeds

Recording Pause

Basic Recording - Operating Instructions

Watch a TV Channel While VCR is Recording

Recording Broadcast Stereo TV or SAP

Recording while You’re Away

VCR Plus+ Recording

Timer Recording

Checking or Clearing VCR Plus+ or Timer Recordings

Express Recording

Additional Recording Information

Recording Audio Only

Using Two VCRs for Copying Tapes

References

18 ’

20-22

Specifications

Cleaning the VCR

Location of Controls

Front and Back Panel

Display Panel

Trouble Checks

Limited Warranty

Index

30.31

1111I

Choosing a Hookup

The hookups on pages 3 through 5 are divided into two hookup types:

Basic (A) and Advanced (B).

The basic hookup shows the backs of TVs that have only an antenna/cable

connection. It is the easier of the two and additional accessories may not be

needed.

The advanced hookup shows the VCR hooked up to a monitor/receiver

(TV with audio and video jacks) using a signal splitter. This connection may

improve the picture quality as well as convenience of operation.

Answer the questions to choose the hookup for your VCR.

How do you receive your TV signals?

Chooseoneanswerfrom

below.

A. Outside antenna -Turn to page 3.

B. Rabbit ears (set-top) and/or bow tie antenna-Turn to page 3.

C. Cable System-Go to question 2.

What type of Cable-TV system* do you have?

Choose one answer from below.

A. Cable without a box-Turn to page 3.

Et. Cable box to unscramble all the channels-Turn to page 4.

C. Cable box to unscramble only pay channels, such as HBO, Showtime,

Cinema, etc. -Turn to page 5.

*You may need to contact your local cable company for assistance.

Optional Hookups

How to hook up two VCRs for copying tapes?

A. Select a hookup by answering questions 1 and 2 above.

0. Then modify the connections as shown on page 6.

How to hook up a stereo amplifier/receiver?

A. Select a hookup by answering questions 1 and 2 above.

B. Then modify the connections as shown on page 7.

A. Basic hookup.

Use this hookup for a simple connection

which requires fewer accessories.

1. Set the CH4 CH3 switch on back of VCR

to either channel 3 or 4.

You will tu,e the TV to this channel and use the

NNCR

button on remote to watch the VCR.

2. Connect as shown.

This connection may require additional

accessories not provided.

3. Plug in power cords of VCR and TV.

4. Turn to page 8 for “Setting Up the VCR.”

Advancedhookup.

Use this hookup for slightly improved

picture quality and more convenient

operation -use of TV/VCR button not

required.

1. Connect as

shown.

This connection requires additional accescries

not provided.

2. Plug in power cords of VCR and TV.

3. Turn to page 8 for “Setting Up the VCR.”

You will tune the TV to its video input to watch

the VCR.

Back of TV

cable

systemwm

cable Box

unscramble

All

channels

Basic hookup.

Use

this hookup for a simple connection

which requires fewer accessories.

1. Set the CH4 CH3 switch on back of VCR

to either channel 3 or 4.

You willtunetheTV to thischannelandusethe

TVNCRbutton on remote to watch theVCR.

2. Connect as shown.

Thisconnectionmay requireadditional

accessoriesnot provided.

3. Plug in power cords of VCR, TV, and

cable box.

4. Turn to page 8 for “Setting Up the VCR.”

Advancedhookup.

Use

this hookup for slightly improved

picture quality and more convenient

operation-use of NNCR button not

required.

1. Connect as shown.

Thisconnectionrequiresadditionalaccessories

notprovided

2 Plug in power cords of VCR, TV, and

cable box.

3. Turn to page 8 for “Setting Up the VCR.”

You willtune theTVto its video input to watch

the

VCR.

P ““”““.’“’.““’..-- ””

“”““““’

“”.“’“““’

Back

of VCR

Cable Box RF$$*

-‘~‘-~J&-~ .,,’

rmtenna :

UHF

Back of lV

cablesYsternwithcableBoxtounscramMePaychaMels

(such as

HBO,siLdme,Peypayper-vlew,~ebsJ

Basic hookup.

Use

this hookup for a simple connection

which requires fewer accessories.

Set the CH4 CH3

switch on back of VCR

to either channel 3 or 4.

You willtune theTVto thischanneland use the

NNCR buttonon remote to watch the “CR.

2. Connect as shown.

Thisconnedion may requireadditional

accessoriesnot Provided.

3. Plug in power cords of VCR, TV, and

cable box.

4. Turn to page 8 for “Setting Up the VCR.”

8. Advanced hookup.

Use

this hookup for slightly improved

picture quality and more convenient

operation-use of WNCR button not

required.

1. Connect as shorn.

Thisconnection requiresadditionalaccessories

not provided.

2. Plug in power cords of VCR, TV, and

cable box.

3. Turn to page 8 for “Setting Up the VCR.”

You willtune theIV to its video input to watch

the VCR. Allpay

channelsareviewedthrough

theVCR.

; i

Cable/ i,

:Antenna

Back of TV

Cable Box

Fromcam

I-

Back of VCR

lmn

ConnectinglhfoVCRsforCopyingWpes

Option A Hookup.

Use

this hookup for a simple connection

which requires fewer accessories.

1. Select a hookup horn pages 2 through 5

and then modify with this connection.

Set the

CH4 CH3

switch on the playback

VCR to either channel 3 OI4.

You willtune ttle recording “CR to this channel

toreceivethesignalfromthe

Playback“CR.

4. Plug in power cords of VCRs and TV.

5. Turn to page 8 for “Setting Up the VCR.”

Option B Hookup.

RF Coaria,

1 -

or- a,

Cable . *tiiONideo

Csbles

Use the hookup to the TV

as previously selected on

pages $4, or 5.

Playback VCR (only)

Use

this

hookup for slightly improved copy

quality and more convenient operation - use

of TVNCR button not required.

Select a

hookup from Pages 2 through 5

and then modify with this connectton.

2. Connect as shown.

Thisconnedian requiresadditionalaccessories

not provided.

3. Plug in power cords of VCRs and TV.

4. Turn to page 8 for “Setting Up the VCR.”

You WitIselecttheline(audio/video) inputon

therecording VCRto receive the signal from

theplaybackVCR.

Playback VCR

Use the hookup to the N

as previously selected on

pages 3,4, or 5.

:...

,,,, ,,,,

.,.,.,.,.,, ,,,, ,,,,,,,.,,,.,.,,,

,,,,.,.. ,.~.,,, ,..,,.., ,,,,,,_,,,.

IIUI

Connecting

Stereo AmplicierlReceiver

Record on the VCR from an

Amplifier/Receiver

Connect your VCR to a stereo amplifier/

receiver to record stereo audio.

Select a

hookup from pages 2 through 5

and then modify with this connection.

2. Connect as shown.

Thisconnection

requires additional accessories

not provided.

Plug in power cords of amplified

receiver, VCR, and TV.

4. Turn to page 25 for “Recording Audio

Only.”

You will selecttheline

input (audio/video) on

the VCR to receive the audio signal born the

~lllplifiW/~K~iW.

Play Back Stereo Tapes or

Receive a Stereo Broadcast

Through an Amplifier/Receiver

Connect your VCR to a stereo

amplifier/receiver to receive stereo

broadcasts or play back stereo tapes.

1. Select P hookup from pages 2 through 5

and then modify with this connection.

2. Connect as shown.

Thisconnectionrequiresadditionalaccessories

notprovided.

3. Plug in power cords of amplified

rec&er, VCR, and TV.

4. Turn to page 13for “Playback

Operation.”

Back of VCR

FliONO TUNER T&FE

*ux

Back of Amplifier/Receiver

.,, ., _,

Back of VCR

Back of Amplifier/Receiver

Startup

1. Check accessories with VCR.

Contact your

dealer if any items are missing.

{.-To <;-To

Remote 2 va” Batteries Power Cord

(Stock No. 218103)

RF Coaxial Cable

(Stock No. 218104) (Stock No. ~oSOSS)

2. Attach power cord to back of VCR.

3. Insert batteries in remote.

4. mm on the TV.

A. Turn on the TV.

If you used one of the basic hookups, tune the TV to the channel

selected with the CH4 Cti3 switch on back of VCR.

If you used one of the advanced hookups, t”ne the TV to

the TV’s video input. (See TV’s owner’s manual for details.)

5. lWn on the VCR.

A. Press VCR1 (VCR2) on the remote.

6. Place channels in the VCR’s memory (AutoProgram).

Channels

2 through 13 are in the VCR’s memory when you first hxn it on.

Pressing CHANNEL up or down stops on these channels.

To get additional

channels available on your antenna or cable system, you must AutoProgram

the VCR.

Press VCR1 (VCR2) to set remote to control

VCR.. ,

Press

PROG/VCR+ on the remote to seethe VCR MAIN MENU on “CR fa*,N HEN”

the TV screen. If the menu does not

appear on the TV screen: I “CR PLUS

Make sure TV is tuned to same

channel as CH4 CH3 switch on z PROGRP.IITllER

VCR or the TV’s video input (refer to TV’s manual). 3 REVlEY PROGRI~S

4 SET “CR CLOCK

5 SET UP “CR

Press

VCR1 (VCR2).

and

then press PROG/VCR+.

If you use a basic hookup, check

VCR

indicator in display panel -

it should be on. Press NNCR to turn it on.

Check the connections.

When menu appears, press 5 to select SET UP VCR.

Press 1 to begin

AUTOPROGRAM CHANNELS.

Wait until the channel numbers stop

changing.

This takes about

one to two minutes. The TV will then tune to the lowest channel found

Pressing

CHANNEL up or

down will select only the active channels.

The VCR automatically

selectsANTENNA or CABLE. If you need to

change the setting manually, press 3.

continued on next page

lllrl

Inhaltsverzeichnis

Andere RCA Videorecorder-System Handbücher

Beliebte Videorecorder-System Handbücher anderer Marken

Toshiba

Toshiba M-662 Bedienungsanleitung

Sony

Sony GV-500 Primary Bedienungsanleitung

JVC

JVC HR-J282EU Bedienungsanleitung

Sony

Sony HDCAM-SR SRW5800 Bedienungsanleitung

Magnavox

Magnavox VRU242AT Bedienungsanleitung

Sony

Sony HVR-M10C Bedienungsanleitung

JVC

JVC HR-5910U Bedienungsanleitung

Panasonic

Panasonic ProLine AG-1320 Bedienungsanleitung

JVC

JVC HR-S8600EU Bedienungsanleitung

JVC

JVC HR-FS1U Bedienungsanleitung

Sharp

Sharp VC-H9888U Bedienungsanleitung

FUNAI

FUNAI LC-950 Bedienungsanleitung

Sharp

Sharp VC-S2000GM Bedienungsanleitung

Sony

Sony Video8 EV-A60 Bedienungsanleitung

Panasonic

Panasonic Omnivision PV-V4523S Bedienungsanleitung

Aiwa

Aiwa HV-E212 Bedienungsanleitung

JVC

JVC HR-J3006UM Bedienungsanleitung

GE VG4271 Bedienungsanleitung