RDA FirePro V2 Bedienungsanleitung

Manual (Translated)

FirePro V2 Control Unit

Door control for FS drives:

FirePro V2 Control

Hardware version V2. 3

Software version V4.1

Publication Date: 02/12/2021

Door control

FireProV2

Manual

Please keep this manual with attachments carefully!

Door control 
FireProV2 
Manual 
 
Please keep this manual with attachments carefully! 
 

 
Index: 
 
1Index:.............................................................................................................................2 
2Safety instructions.........................................................................................................4 
1 Relevant Safety requirements:...............................................................................4 
3Control Print Overview.................................................................................................5 
4Schedule with NES motor.............................................................................................6 
5Schedule with DES motor.............................................................................................7 
6Technical data ...............................................................................................................8 
7Description of Control Unit...........................................................................................9 
1 Fire alarm:..............................................................................................................9 
2 Smoke detection:....................................................................................................9 
3 Siren/Alarm:...........................................................................................................9 
4 Safety edge:............................................................................................................9 
5 Photocell protection:............................................................................................10 
6 Light curtain:........................................................................................................10 
7 Escape button:......................................................................................................10 
8 Maintenance Cycle: .............................................................................................10 
8Mounting.....................................................................................................................11 
9Connect........................................................................................................................12 
1 Power supply:.......................................................................................................12 
2 Power supply 24 VDC / Battery Charger: ...........................................................13 
3 Motor: ..................................................................................................................14 
4 Mechanical End Switches:...................................................................................14 
5 Digital limit switches:..........................................................................................15 
6 Roll-off, cable break/slack cable protection: .......................................................15 
7 UP-Stop-down operation: ....................................................................................16 
8 Photocell: .............................................................................................................16 
9 Light curtain:........................................................................................................16 
10 Connecting LIGI 01-PNP light curtain: ...........................................................17 
11 Connecting LIGI 01-PNP light curtain: ...........................................................19 
12 Key switch:.......................................................................................................21 
13 Fire Alarm / Smoke detector:...........................................................................21 
14 Escape button: ..................................................................................................21 
15 Impulse:............................................................................................................21 
16 Safety edge:......................................................................................................22 
17 Siren/Alarm:.....................................................................................................22 
18 Outputs:............................................................................................................23 
19 Smoke detection (only in combination with inflatable bellows):.....................23 
Setting control..........................................................................................................25 
1 Adjust limit switches NES ...............................................................................25 
2 Adjust limit Switches .......................................................................................25 
3 Automatic or hold to run operation..................................................................26 
4 Duration NES Motor........................................................................................26 
5 Protections........................................................................................................27 
6 Impulse function...............................................................................................27 
7 BM (Fire alarm) function.................................................................................28 
8 RM (Smoke detection) with Reset function.....................................................28 

Door control 
FireProV2 
Manual 
 
Please keep this manual with attachments carefully! 
 

9 Continuing when empty or disconnected battery:............................................29 
10 Opening after passing digital limit switches ....................................................29 
11 Low battery voltage..........................................................................................29 
12 Notifications.....................................................................................................29 
13 Maintenance counter ........................................................................................30 
Menu........................................................................................................................31 
1 Parameter settings 0. : ......................................................................................31 
2 Parameter settings 1. : ......................................................................................33 
3 Parameter settings 2. : ......................................................................................34 
4 Parameter settings 3. : ......................................................................................35 
5 Parameter settings 4. : ......................................................................................36 
6 Parameter settings 5. : ......................................................................................37 
7 Parameter settings 8. : ......................................................................................37 
8 Parameter settings 9. : ......................................................................................37 
Notifications ............................................................................................................38 
1 E; Status notifications : ....................................................................................38 
2 F; Error messages:............................................................................................39 
3 Common Errors................................................................................................42 
Declaration of Conformity.......................................................................................43

Door control

FireProV2

Manual

Please keep this manual with attachments carefully!

2 Safety instructions

This manual is translated from the original Dutch manual, In the event of discrepancies between

the two, the Dutch version shall prevail.

Read this manual carefully before starting work on this

Control unit. Check the screw connections before this control unit becomes operational.

Caution: before starting work on this control, first

Disconnected the power supply and disconnect the poles of the batteries.

Performing work on this control under tension is life-threatening & can cause serious

injuries!

Only qualified personnel with appropriate equipment and knowledge are permitted to carry

out work on this control. Qualified personnel means persons who are familiar with the

installation, configuration, commissioning & operation of electrically driven door, gate

installations. They must be able to assess the complete installation, identify possible

hazards and apply the necessary safeguards.

2.1 Relevant Safety requirements:

The safe use of this control can only be guaranteed when used as intended. The manufacturer is

not responsible for damage that has occurred due to external components or non-compliance with

these instructions.

Modifications are only permitted in accordance with the manufacturer. If modifications are applied

without the manufacturer's consent, the manufacturer's declaration is not valid.

During installation, commissioning, maintenance and control of the controller shall

Specific case applicable in compliance with the safety and accident prevention rules

to be taken.

Only apply safety products (as: safety edges and photocells which comply with applicable

standards.)

The manufacturer accepts no liability for damage resulting from operating and connection errors,

neglect of the operating instructions or inadequate maintenance and / or service, and again refers to

the possible occurrence of dangerous situations.

Despite conformity with harmonized standards, not every possible hazard can be foreseen. For this

reason, people should only enter the danger zone if this is necessary.

If in doubt about the installation, do not proceed and contact the

Technical Service for clarifications.

All information on this document (photos, drawings, characteristics and dimensions) may be

subject to change without prior notice.

Please read this manual carefully and keep this manual with

Attachments carefully!

Door control

FireProV2

Manual

Please keep this manual with attachments carefully!

3 Control Print Overview

Door control

FireProV2

Manual

Please keep this manual with attachments carefully!

4 Schedule with NES motor

Door control

FireProV2

Manual

Please keep this manual with attachments carefully!

5 Schedule with DES motor

Door control

FireProV2

Manual

Please keep this manual with attachments carefully!

6 Technical data

Power supply : 3N ~ 400VAC +/-10%, 50/60Hz

: 3 ~ 230VAC +/- 10%, 50/60Hz

: 1N ~ 230VAC +/-10%, 50/60Hz

Fuse : Max. 5A Slow

Maximum power : 2,2Kw

Maximum current : 8,5A

Control voltage : 24Vdc

Control current : 300mA

External power supply : 24Vdc

Maximum current : 100mA

Battery : Voltage: 12v

LxWxH: 151x51x94mm

Brand: CSB Battery

Type: UPS123607

Weight: 1.97 kg

Technology: AGM

Relay outputs : Potential-free switch contacts

Maximum load : 230VAC resistive last = 1A/inductive charge = 1A

Relay outputs : Various notifications as N.O. contact with 1 common

Maximum load : 24VDC resistive last =1A / inductive charge =1A

Temperature range : + 5... + 40 °C

Humidity : Max. 93% (non-condensing)

Vibration : Vibration-free mounting (e.g. concrete wall)

Enclosure Size : 400 x 300 x 150mm (L x W x H)

Protection class : IP33

Weight : 9,8kg

Door control

FireProV2

Manual

Please keep this manual with attachments carefully!

7 Description of Control Unit

The FirePro is a controller for failsafe drives (FS series) with mechanically adjustable limit

switches (NES) or digital Absolute Encoder (DES) and centrifugal brake. This control unit can

work both automatically and in hold to run. The operation is possible with the control buttons on

the cabinet and by means of external up-stop-down control. There is also an input for an impulse

control (e.g. pull switch) available.

A two-color LED is present on the lid which is green in normal operation and is red in case of

malfunction, fire alarm, smoke detection or power failure. The notification belonging to the red

LED is displayed on the control print display.

There is an input for the safety contact (NC) of the safety brake. If this entry is interrupted, the

door can no longer be operated.

The control unit is equipped with batteries that provide the control voltage and hold the brake in

case of a power failure if there is no fire or smoke notification. In the case of fire alarm, smoke

detection or if the batteries are empty or not present, the door will drops because the power supply

for the brake is gone. When voltage is still present, the door drops until the limit switch is closed

or the "overclose" limit switch is reached. In the menu you can set whether the door is lowered

until the normal limit switch is reached or until the "overclose" limit switch is achieved. With the

"overclose" limit switch a door can possibly drop further than it does during normal operation. A

Stop with a set time can optionally be made at a desired position, during fire alarm, smoke

detection or low battery voltage. This can only be used with CAM switches when the "overclose"

function is not in use.

7.1 Fire alarm:

After fire alarm, the door is released immediately or after extended time (parameter 3.4, 0-140

sec.) .

7.2 Smoke detection:

In the case of smoke detection, a command must be given at the reset entry after the smoke

detection is over. In the case of smoke detection, there is also a potential-free contact indicating

that the door is closed so that the air bellows for smoke sealing can be filled between the door. It

is therefore no longer possible to flee. If this contact is not used for detection, it can be

programmed in the menu to switch if a malfunction is active.

7.3 Siren/Alarm:

When the door is in motion, a potential-free switch can be used to connect a siren or other

signaling. This stops when the door stops moving. in the event of a fire alarm, there is also a

potential-free switch which can also be connected to a siren/alarm or other signaling.

7.4 Safety edge:

It is possible to connect an safety edge. This can be an safety edge by means of DW (air pressure,

1k2) contact, 8k2 safety edge or opto sensors. Under normal operation, the safety edge only works

if automatically Closing is selected. In the event of a fire alarm, smoke detection or low battery

voltage, the safety edge can be switched on or off. If it is switched on, when the safety edge is

activated, the door will stop. The menu allows you to select which safety edge has been chosen

and set the waiting time after the safety edge has been activated before the door continues to drop.

If the power supply is still present, you can also select to fully open the door and then close it

again.

Inhaltsverzeichnis

Andere RDA Steuereinheit Handbücher

RDA

RDA FireSafe Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung