RealSimulator F16SGRH Bedienungsanleitung
ELECTRONICA, MECANICA Y CONTROL, S.A.
RealSimulator
User Guide
F16SGRH
F16SGRH-UserGuidev1.00.3
EMYCSA - RealSimulator
Avda. Manoteras, 22 –nave 42
28050 –Madrid (Spain)
Phone: (+34) 91 383 83 25
Email: technic@realsimulator.com
Contents
Overview 4
Package Content and Technical Data 7
Package content 7
Technical data 7
Installation 9
Powering in standalone mode 9
Powering from a stick base 10
Attaching the device to the computer 11
Tools Installation 15
Firmware Update 20
RS_HID_DEV_TOOL and F16SGRH 27
Overview 27
Connecting RS_HID_DEV_TOOL and F16SGRH 31
How the F16SGRH works 33
Pairing F16SGRH 37
Axes calibration overview 39
X and Y axes calibration 41
Z axis calibration 42
Manually configure Raw Axes 43
Slot Configuration 45
Load, Save and Print a .xml configuration file 54
Working offline with the F16SGRH 56
Documentation 57
Overlay Settings 58
F16SGRH and FSSB-R3 61
Overview 61
Firmware MJF_FW_F16_SG_1_00_X and 2_00_X 62
Firmware MJF_FW_F16_SG_3_20_X 71
Revision History 74
FAQ 76
I have just received my RealSimulator device and I want to install it, but I do not find the drivers in anyplace. 77
Requirements to use RealSimulator grips. 77
I want to install a new version of RS_HID_DEV_TOOL or DCC, but I cannot uninstall the older one. 77
How to know if the computer has Bluetooth BLE hardware installed? 78
I can’t attach/pair my stick. Is it locked? 78
Why does pressing the trigger change my axes measures? 79
What firmware should I install in my R3 to work with the F16SGRH? 79
Can the F16SGRH work on W7 or W8.0? 80
4 / 80
EMYCSA
RealSimulator
Overview
Date: 13/09/2019
Version: 1.0
PICTURE
DESCRIPTION
The F16SGRH as well as the RS grip family come in two lines, professional and home
use.
Professional range uses its own software and real military switches as well as custom
socket and connector, under client specification.
Home version is a supersede of professional unit, same dimensions, same high grade
fixation system, same high density resin in one piece body construction, but with the
addition of:
a) Upgradeable electronic module
b) Rotary switch, installed under TRIM hat switch cap, to easily hot swapping
between 8 configurable memory slots; so, with a single thumb movement you
can reconfigure the whole system in a fraction of a second.
ROTARY
SWITCH
TRIM HAT
SWITCH
5 / 80
c) 5-way switches in all the hat switches (CMS, TMS, DMS and TRIM), with the
possibility to disable center position.
d) 5-way switches where in real life there is 1 (WR, NWS and PINKY), with the
possibility to disable the additional ways.
e) Three status LEDs used for BLE information and Slot number in use.
f) Realistic Trigger movement.
g) Independent Bluetooth communications, so you can use it alone, or with an X/Y
base.
h) Three Analog axes in the standard configuration for Roll, Pitch and Yaw.
These axes are independent of the standard axes in the X/Y base.
i) Lightweight focused in use with VR goggles in standup position or out of the
base.
j) Mini-DIN to USB cable, to let you connect the grip to any power bank and use it
at your convenience.
k) The same mini-DIN to USB cable can be used to install the grip in any rod with
no necessity of X/Y electronic or sensor, the F16SGRH has its own 3 axes
sensor integrated.
l) Firmware upgradeable through BLE, so you could need a 4.0 or higher BLE
dongle if your PC doesn’t have BLE included.
The F16SGRH is a wireless device connected by Bluetooth (BLE), so no available
USB port is necessary; the computer only need a BLE connection, integrated in the
mother board or by a dongle.
The computer must run under Windows 8.1 or higher because windows 7 and 8.0 do
not support BLE devices and with these OS versions the device is not full operative, it
is just a standard stick not configurable or upgradeable. We suggest using Windows
10, in this OS we have fully tested the device functionality and software tools supplied.
NOTE: F16SGRH can be used without losing functionality in Windows 7 and 8.0
platforms if it is connected to a FSSB-R3 Lighting with the new firmware developed for
this device. You can find more information in the Firmware
MJF_FW_F16_SG_3_20_X section.
The F16SGRH can be used with an USB wire as a standalone system or connected to
a TM© system (Cougar or Warthog) or any R1, R2 or R3 RealSimulator system.
When the F16SGRH is connected to a FSSB-R3 base, the latter offers the following
additional features: slot number goes from 4 to 8, no SMM system just as you have 8
different configurations with hot swap (fast change), and 64 buttons to achieve the
center position and center + up, down, right, left, and additional keyboard functions.
The F16SGRH is supplied with a firmware update tool (DCC) that can be used to
install new versions of firmware and a GUI application (RS_HID_DEV_TOOL) used to
configure the device. Both tools can be extracted from the same from the download’s
website.
http://www.realsimulator.com/html/downloads.html
The RS_HID_DEV_TOOL program allows you to fully configure the device, allowing
6 / 80
you to perform the device pairing, axes calibration, analog control and keystrokes
assignation in each memory slot, light intensity of status LEDs, etc.
The analog control of each axis can be used to independent adjust roll, pitch and yaw
to anyone´s liking for each memory slot. In every slot you can configure:
Full Scale Control
Roll Sensibility
Pitch Sensibility
Yaw Sensibility
Roll Control Assistance
BFA Roll level
BFA Pitch level
Precision mode
Other additional features are:
HAT as POV or TRIM
Keystrokes ON/OFF
DX Buttons ON/OFF
DX Center Buttons in four modes: native (ON), basic (COMP), center removed
(OFF) and double click (DClick).
Test window called Output
64 DX buttons can be enabled or disabled for every slot.
64 keystrokes can be enabled or disabled for every slot, and of course can be
different in every slot
SWled function to enable/disable showing switches activation in status LEDs
when pressed.
Adjustable LEDs lighting level.
Slot name over the desired application with the Overlay function.
7 / 80
EMYCSA
RealSimulator
Package Content and Technical Data
Date: 13/09/2019
Version: 1.0
PICTURE
DESCRIPTION
Package content
The package, shown in the picture above, contains the following components:
F16SGRH device.
USB wire (USB type A to mini-DIN 5 pin female).
F16SGRH is supplied as a plug and play device with no drivers.
IMPORTANT NOTE: communications for configuration, upgrading and full device
information are made by BLE, so you will need a computer running Windows 8.1 or 10
preferably and a BLE connection. If your computer does not have BLE included, you will
need a BLE dongle. We suggest the models SVEON STC400 or CSR 4.0, they are
tested and work fine.
Technical data
F16 grip true replica with correct inclination.
One piece body manufactured in high density resin.
High grade fixation system with knurled nut.
8 / 80
Wireless communications by Bluetooth Low Energy (BLE).
Composite device: joystick (axes and buttons) and keyboard (keystrokes).
Integrated sensors for Pitch, Roll and Yaw.
Hot swap 8 memory slots.
5-way switches in all switches.
Functional as standalone or with FSSBs (R1, R2 and R3) or Thrustmaster bases
(Cougar or Warthog) or compatibles.
Three red status LEDs with light intensity adjust.
HAT as POV or TRIM.
Full scale control with 4 levels, 1:1, 3:4, 1:2 & 1:4.
Sensibility control for Roll, Pitch and Yaw (0 –100%).
Roll Control Assistance (ON - OFF).
BFA Pitch and Roll level (Off –Min - Med - High - Full).
Precision mode (ON - OFF).
Keystrokes (ON - OFF).
DX Buttons (ON - OFF).
DX Center Buttons in four modes: native (ON), basic (COMP), center removed
(OFF) and double click (DClick).
SWled function to enable/disable showing switches position in status LEDs when
pressed.
Adjustable LEDs lighting level.
8 Memory Slots for quick custom configuration
Configuration and firmware upgrade by Bluetooth (BLE).
Power cable for standalone use included (1,8 m).
Weight. 340 gr.
9 / 80
EMYCSA
RealSimulator
Installation
Date: 13/09/2019
Version: 1.0
PICTURE
DESCRIPTION
The F16SGRH grip can be used in two ways, as a standalone device or connected to a
stick base like the FSSBs (R1, R2 and R3), Thrustmaster (Cougar or Warthog) or
compatibles.
In any way, to install the device in the computer and use it, two steps are necessary:
power it and attach it to the computer
Powering in standalone mode
This way, the 5-pin mini-DIN connector is used to power the device, for this, you must
use the cable supplied to connect the grip to a USB type A connector in a PC, a power
bank, a USB wall socket, etc.
All the buttons and axes information will be sent by the BLE comms.
10 / 80
Please, when connect the cable to the grip pay especial attention to align correctly the
two connectors to prevent damage in pins or connectors. For that, both connectors have
visible marks as you can see in the above image.
Powering from a stick base
The F16SGRH grip can be connected to a stick base, like the FSSBs (R1, R2 and R3),
Thrustmaster (Cougar or Warthog) or compatibles.
This way, the 5-pin mini-DIN connector is used to power the grip and to read the grip
buttons status, just like a standard grip. This way, the F16SGRH sends the standard 18
buttons and hat switch information to the stick base.
If the grip is connected to a FSSB-R3 base with the firmware
“MJF_FW_F16_SG_x_xx_x.FSSB_R3”, it can get the 64 buttons and rotary switch
information. This way, the R3 slots are increased from 4 to 8, the SMM is disabled and
the change between slots is made with the rotary switch.
Up to this point, the stick functions like a standard grip, but additionally, as the
F16SGRH has wireless communications by Bluetooth, we can continue getting all the
extra information from it, as for example the use of keystrokes, the other 46 extra
buttons, etc.
In Windows 7 and 8.0 platforms where BLE devices are not supported; if you use the
Andere Handbücher für F16SGRH
1
Inhaltsverzeichnis
Andere RealSimulator Controller Handbücher
