Red lion PGMMOD05 Bedienungsanleitung

E179259

Product manual

PGMMOD05

Display / programming front

Drawing No. LP1200 Rev A

From serial no.: 221207001

Revision Date July 2023

LP1200 1

Display / programming front

PGMMOD05

Contents

Warning ................................................................................................ 2

Symbol identiﬁcation .................................................................................... 2

Safety instructions ...................................................................................... 3

Mounting / demounting of a PGMMOD communication interface ............................................ 4

Applications ............................................................................................ 5

Technical characteristics ................................................................................. 5

Mounting / installation / programming .................................................................... 5

Ordering information .................................................................................... 6

Electrical speciﬁcations .................................................................................. 6

Display layout........................................................................................... 7

Operating the function keys / display ..................................................................... 8

PGMMOD settings - routing diagram ...................................................................... 10

FM Installation Drawing.................................................................................. 11

Red Lion Controls Technical Support ...................................................................... 13

2 LP1200

Warning

This device is designed for connection to hazardous electric voltages. Ignoring this warning can result in

severe personal injury or mechanical damage.

To avoid the risk of electric shock and fire, the safety instructions of this guide must be observed and

the guidelines followed. The specifications must not be exceeded, and the device must only be applied

as described in the following.

Prior to the commissioning of the device, this installation guide must be examined carefully.

Only qualified personnel (technicians) should install this device.

If the equipment is used in a manner not specified by the manufacturer, the protection provided by the

equipment may be impaired.

Repair of the device must be done by Red Lion Controls only.

Symbol identification

Triangle with an exclamation mark: Read the manual before installation and commissioning of the

device in order to avoid incidents that could lead to personal injury or mechanical damage.

The CE mark proves the compliance of the device with the essential requirements of the EU directives.

The UKCA mark proves the compliance of the device with the essential requirements of the UK

regulations.

GENERAL

LP1200 3

Safety instructions

Receipt and unpacking

Unpack the device without damaging it and check whether the device type corresponds to the one ordered. The packing

should always follow the device until this has been permanently mounted.

Environment

Avoid direct sunlight, dust, high temperatures, mechanical vibrations and shock, as well as rain and heavy moisture. If

necessary, heating in excess of the stated limits for ambient temperatures should be avoided by way of ventilation.

The device must be installed in pollution degree 2 or better.

The device is designed to be safe at least under an altitude up to 2 000 m.

The device is designed for indoor use.

If the equipment is installed within an ultimate enclosure, the inner service temperature of the enclosure corresponds to the

ambient temperature of the device.

If the device is operated in an ambient temperature between +55ºC and +60ºC, the temperature of the device housing may be

higher than +60ºC. The device must therefore be installed so that it is only accessible to service personnel or users that are

aware of the reason for restricted access and the required safety measures at an ambient temperature of +55ºC to +60ºC.

Mounting

Only qualified technicians who are familiar with the technical terms, warnings, and instructions in this installation guide and

who are able to follow these should connect the device. Only devices which are undamaged and free of moist and dust may be

installed. The device may be installed and supplied by PGMMOD02 and IAMS/AFCM/IFM devices only.

Should there be any doubt as to the correct handling of the device, please contact your local distributor or, alternatively,

Red Lion Controls

www.redlion.net

Cleaning

When disconnected, the device may be cleaned with a cloth moistened with distilled water.

Warranty

Red Lion Controls offers a 5-year warranty on this product.

Liability

To the extent the instructions in this manual are not strictly observed, the customer cannot advance a demand against Red

Lion Controls that would otherwise exist according to the concluded sales agreement.

4 LP1200

Mounting / demounting of a PGMMOD communication interface

Communication interfaces in the PGMMOD series are detachable displays that can be mounted on a PGMM0D02 or all IAMS/

AFCM/IFM fronts for programming and signal monitoring.

Mounting

1: Insert the tabs of the PGMMOD into the holes at the top of the device.

2: Hinge the PGMMOD down until it snaps into place.

Demounting

3: Push the release button on the bottom of the PGMMOD and hinge the the PGMMOD out and up.

4: With the PGMMOD hinged up, remove from the holes at the top of the device.

LP1200 5

Display / programming front

PGMMOD

• Programming display for all past and present IAMS/AFCM/IFM devices

• Monitor process value and status from the built-in display

• Scrolling help text in 7 languages

Applications

• Communications interface for programming and modification of operational parameters.

• The easily readable PGMMOD display can be used to monitor the process signal, simulate the output signal, indicate sensor

errors and internal device errors.

• The PGMMOD can be moved from one device to another. The individual system IAMS/AFCM/IFM device configuration of a

transmitter can be saved and downloaded to subsequent transmitters.

Technical characteristics

• Easy-to-read dot matrix LCD display.

• Backup memory for loading and saving of device configuration.

• Programming access can be blocked by assigning a password. The password is saved in the device in order to ensure a high

degree of protection against unauthorized modifications to the configuration.

Mounting / installation / programming

• Mounting in Zone 2 / Div 2.

• All configuration data from an IAMS/AFCM/IFM device can be transferred to a PC using the PGMMOD02.

• When mounted on devices that are installed upside down, a menu item allows the display on the PGMMOD to be rotated

180° and the up/down buttons to switch function.

• The PGMMOD is approved and certified as an add-on component for the IAMS/AFCM/IFM series of devices. All technical

characteristics are valid with the PGMMOD attached.

6 LP1200

Ordering information

Electrical specifications

Environmental conditions:

Operating temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20°C to +60°C

Storage temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20°C to +85°C

Humidity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 95% RH (non-cond.)

Protection degree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP20 when installed

Installation in pollution degree 2 / overvoltage category II.

Mechanical specifications:

Dimensions (HxWxD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73.2 x 23.3 x 26.5 mm

Dimensions (HxWxD) w/ IAMS/AFCM/IFM unit . . . . . . . . . . . . . . . . . . 109 x 23.5 x 131 mm

Weight approx. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 g

Common specifications:

Supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5...20 V supplied from host IAMS/AFCM/IFM device

Max. required power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.15 W

Observed authority requirements:

EMC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2014/30/EU & UK SI 2016/1091

RoHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2011/65/EU & UK SI 2012/3032

Approvals:

c UL us, UL 61010-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E179259

Ex:

FM, US . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM23US0021X

FM, CA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM23CA0015X

Description Part Number

Display / programming front

Programming module kit

PGMMOD05

PGMMOD02

LP1200 7

Display layout

By default, the PGMMOD enters monitor mode for process surveillance. With the front keys, the PGMMOD can enter

programming or simulation mode.

Layout for IAMS/AFCM/IFM series products (in monitor mode)

IAMS/IFM

Line 1 shows the scaled process value.

Line 2 shows the selected engineering unit.

Line 3 shows analog output value or TAG no.

Line 4 shows status for relay, communication and e.g. signal

trending.

AFCM

Line 1 shows status for input channel/-s.

Line 2 and 3 show analog output value / digital output status /

analog input value / TAG no. where appliable or alternating

values.

Line 4 shows status for relay, communication and e.g. signal

trending.

8 LP1200

Operating the function keys / display

In general

When using the PGMMOD for configuration of an IAMS/IFM or AFCM device, you will be guided through all parameters and can

choose the settings which fit the application. For each menu there is a scrolling help text which is automatically shown in line

3 on the display.

Configuration is carried out by use of the 3 function keys:

1will increase the numerical value or choose the next parameter

2will decrease the numerical value or choose the previous parameter

3will save the chosen value and proceed to the next menu

When configuration is completed, the display will return to the default state (monitor). Pressing and holding 3will return to

the previous menu or return to the default state without saving the changed values or parameters.

If no key is activated for 1 minute, the display will return to the default state without saving the changed values or

parameters.

For device-specific programming menus, please refer to the user manual for each device.

PGMMOD display icons explained

IAMS/IFM Relay status (Relay energized]. Icon with 1 or 2 blinking indicates

delayed relay action (programmable on/off delay).

Arrow up/down indicates process value is trending higher/lower.

Circular indicator confirms display to host communication.

AFCM Relay status (Relay energized]. Icon with 1 or 2 blinking indicates

delayed relay action (programmable on/off delay).

Arrow up/down indicates process value is trending higher/lower.

Circular indicator confirms display to host communication. Steady

dot indicates device is SIL-locked, blinking dot indicates non SIL-

locked device.

Checkmark indicates input OK or ‘!’ for error condition / device

error on channel input.

One or two channels:

ON indicates that the relay / digital output is energized.

OFF = not energized.

The pulse icon indicates input frequency above 1 Hz.

Device faults are displayed in channel 1 status.

Device or sensors faults messages e.g. CA.BR (cable break) are

device-dependent, please consult device manual for a complete

list of applicable error codes.

Inhaltsverzeichnis

Andere red lion Hauptplatine Handbücher

red lion

red lion CUB5USB Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

red lion PGMMOD05 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken