Redsail CM-Series Bedienungsanleitung

CM-Series Laser Engraving

&Cutting

Readsail Tech Co.,Ltd

This type of Laser Cutting Machine is

GB4 series Laser Product .Please note laser

radiation when use it. Avoid your eyes or skin

get direct or scattering radiation!

Catalog

Prolog.......................................................................................................1

Matters need attention：............ ....................................................................2

Chapter 1 Safety Directions

1·1 Machinery Safety

1·1·1 General Safety Rules ..........................................................................3

1·1·2 General Safety Items ..........................................................................3

1.1.3 Machine hanging and Transport Safety ....................................................3

1.1.4 Electrical Safety ................................................................................4

1.1.5 Mechanical Safety .............................................................................4

1.2 Safety Signs .......................................................................................5

1.3 Warning Signs .....................................................................................8

Chapter 2 Summary

2.1 character............................................................................................9

Chapter 3 Machine Installation and Directions

3.1 Laser Tube Installation ..........................................................................10

3.2 Connection of water pipe, air pipe, air pump and water cooler .......10

3.3 Ventilator and Ventiduct Connection ..........................................................11

3.4 Power Supply Input/Output Directions ........................................................12

3.5 Switch Controller Directions .....................................................................12

3.6 USB Data Wire Connection ......................................................................13

3.7 Controller Directions...............................................................................13

Chapter 4 Adjustment of Optical Path ................................................................14

Chapter 5 Software Installation and Operation

5.1 Software Installation...............................................................................17

5.2 Software Operation ...............................................................................17

Chapter 6 Machine Operation ..........................................................................17

Chapter 7 Machine Mainterance and Announcement

7.1 Ground Wire Connection .........................................................................17

7.2 Machine Maintenance ............................................................................18

7.3 Machine Notes......................................................................................19

Prolog

Thank you for choosing Redsail Products ! This use manual provides the users with

Machine’s Safety, installation ,operation and daily maintenance of the relevant

considerations and guidance.

For your safety，proper use the product，be sure to read this manual carefully before

operation，to be fully understood and save it for your later use.After purchase this machine,

check the model, all parts listed on the packing list and check for shipping damage . If

any part is missing or damage, Please immediately contact local dealer or manufacture.

Thank you for choosing Redsail Products again !

This user manual operating instruction is for convenient understanding. It may be some

different from the product, there may be some different when the products get

upgrade , it is only for reference.

This User Manual Application:

This manual applies to our M-series Laser Cutting&Engraving Machine.

Matters need attention

All of the products will be full tested before delivery. Considering transportation and other

reasons, please confirm the following points:

During transport, device is deformed or damage, please dont use if the device is

damaged to avoid the hurt from danger, please inform our company or local agent in

time for such condition.

Please make sure the package is intact, accessories and User Manual is complete.

Please keep the User manual and accessories well for the future use.

Please make sure this device is consistent with that you have ordered, otherwise it

maybe cause the fire or device damaged because of the wrong power connection.

Chapter 1 Safety Directions

1.1 Machinery Safety

1.1.1 General Safety Rules

(1) Know your machine

For your personal safety ， read this manual and CNC system manual carefully, Know

applications and limitations of the machine,and potential danger related to the machine,

make the operation according to the manual direction.

(2) Keep working area clean

Mussy environment and working table may cause an accident.

(3) Don’t use it in the dangerous environment

Don’t use it in wet or rainy place, or expose it to rain. Keep good lighting in working area.

(4) Non-professionals don’t touch

All visitors must keep a safe distance in working area.

(5) Please don’t make the forcible operation for the machine

(6) The machine need to work in the safety speed.

(7) Please use the right tools, don’t take the forcible operation to make the machine or

additional device working.

(8) Wear the proper clothing

Avoid wearing loose clothing, gloves, necklaces, bracelets or jewelry which is possible to

go with the moving part of the machine. Recommend to take non-slip shoes, wear the

cap which can cover the long hair.

(9) Please don’t do maintenance when the machine is working

Machine maintenance should be made properly, such as lubrication and adjustment.

(10) Must be close the machine power when repair, replace the parts or assembly and

reassemble the motor.

(11) Dont make the machine running when nobody

1.1.2 General Safety Items

Please read this manual and CNC system manual carefully before operation, make the

operation according to according to the User Manual directions.

1.1.3 Machine Hanging and Transport safety

Dangerous Remind

Total weight of CM series device is about 300KGS---600KGS (you can check the weight

from the packing list), all handling equipment’s safe loading-bear must more than 50% of

your device. Must use the enough strength rope when hanging the machine, in order to

avoid damaging the machine, otherwise may cause the rope broken, handling equipment

or machinery fall damaged, even causing casualties.

Warning

No matter how to lift the machine, please check the balance carefully, prohibit to

move the machine without balance, otherwise will cause injuries or damage the machine.

When machine lifting and falling, pay more attention not to make the up and down

speed too fast, it maybe bring unexpected shake or strike, otherwise it will make the

machine lose balance, and cause injuries or damage the machine.

When machine lifting, prohibit anybody, car to go under the machine in order to

avoid the accident.

When machine lifting, prohibit to cling to the machine and also prohibit to cling to the

hanger and rope in order to avoid the accident .

Attention Items

When machine lifting and handling, please note whether there is an barrier or person

around the machine, please clean the barrier and let people leave before hanging. To

avoid the collision and danger.

When machine is lifting and handling, control the speed not too fast, should forbid

the urgent brake, in order to avoid the machine shaking to lose balance and fall down.

1.1.4 Electrical Safety

Before wiring，be sure to turn off the power.

Electronic components inside the device are particularly sensitive to static

electricity ,so please don’t put the foreign body inside the equipment or touch

the main circuit board.

AC off , the device 's internal drives, motherboards, laser power indicator

light does not go out it shows that high pressure inside the device is still very

dangerous , do not touch the internal circuits and components.

Please use the power which is same as the rated voltage frequency.

Must install the power stabilizer, when the grid voltage exceeds the rated voltage ±

10%, should not turn on the machine.

Please confirmed all wires insulation is under the good condition, avoid the leakage

and electric shock.

Please check and make sure all indicators for accessories are working properly.

Be sure the machine enclosure right grounding use of range.

1.1.5 Mechanical Safety

After unpacking, firstly you must check the equipment is intact after long transportation.

Turn on the machine when the first time or when stopping using for a long time, please

check if there is interfere in all axis, then lubricate the machine fully before you run the

machine.

Before turn on the machine, please must check whether there are more than 2/3 coolant

in the cooling tank (distilled water or purified water), when the water circulation inside the

laser tube is normal, you can run the laser.

1.2 Safety Signs

For the security part in this User Manual, take the following mark, the statements about

safety signs is very important, please be sure to observe! To avoid the people’s injury and

machine’s damage.

Danger Potentially dangerous situation, it will be happened under the wrong

operation.

Attention Potentially dangerous situation, it will cause the low-grade injury or

middle-grade injury.

Forbid Forbid (Never do)

Force Force(Must do)

Safety Attention:

This section is direction for the important iterms that the user must abey, such as

receipt confirmation, storage, handling, installation, wiring, operation, inspection, liquid

waste disposal, etc.

Danger

Please supply the power for the machine according to the mentioned voltage,

frequency in this manual. Otherwise the machine will be burned or cannot run

normally.

When machine running, don’t touch the slip or rotating parts. Otherwise will cause

injury.

When machine running, don’t touch the terminal inside the machine. Otherwise

will get an electric shock.

Within 5 minutes after the main power switch turn off , don’t touch the terminal

inside the machine. Otherwise will get an electric shock.

When machine running, open flame is strictly prohibited. Otherwise will cause the

fire.

Please make the test run for the machine according to the direction in this

manual.

If appear the wrong operation , it may damage the machine, even cause the

personal injury.

DONT allow to remove the cover , remove the connector, pull electric cables, etc

when the power is opened. Otherwise it may damage the machine, even cause

Inhaltsverzeichnis

Andere Redsail Drucker Handbücher

Redsail

Redsail RS3040A Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung