Rehan i-See Bedienungsanleitung
USER MANUAL
i-See
User Manual V1.48F 1
EN
1 Introduction ......................................... 2
2 Installation, safety and maintenance .......... 2
Package contents ................................... 2
Installation ........................................... 2
Attach the TFT screen ............................. 2
Tilt the screen ...................................... 3
Adjust the height of the screen ................. 3
Connecting the cables ............................. 4
Use .................................................... 4
3 Controls .............................................. 5
Zooming .............................................. 6
Preferred zoom setting ........................... 6
Blocking the autofocus ............................ 6
Display modes ....................................... 7
Contrast / Brightness .............................. 7
Reading aid .......................................... 8
Tableau ............................................... 8
Brake handle ........................................ 8
Switch Screen ....................................... 9
4 Regulations .......................................... 9
5 Technical specications ........................... 10
i-See Special
2
EN
1 Introduction
Congratulations with your i-See; a desktop video magnier of high
quality that is especially user friendly.
Read this manual thoroughly before you start to use your i-See.
This manual contains instructions on how the device needs to be
installed, and describes all of the functions of the i-See.
2 Installation, safety and maintenance
Package contents
The package of the i-See contains the following:
• i-See base
• TFT screen for the i-See
• Powercable
• Manual
Installation
Never open up the device yourself; this will void your
warranty. If you suspect the device is in need of service
or repairs, please contact your supplier.
The i-See will be delivered to you in a pre-assembled state. All you
have to do is connect the TFT monitor to the base, click the control
interface to the monitor, attach the cables to the TFT monitor and
connect the power cable to the base.
Attach TFT screen
You can attach the TFT monitor by hanging it on the base and
tightening the bolts on both rear sides of the screen.
User Manual V1.48F 3
EN
Tilt the screen
Loosen the bolts at both rear sides of the screen; this loosens up the
screen so you can move it in your preferred position. Tighten the
bolts to secure the screen at that position.
Adjust the height of the screen
With the i-See Special it is possible to adjust the height of the
screen. Simply grab the lever at the right side of the TFT screen,
pull it towards you and, while holding your left hand at the lower
left corner of the screen, slide the screen up or down. Release the
lever to secure the screen at that position.
i-See Special
4
EN
Connecting the cables
Use
• Avoid direct sunlight on the screen and tableau.
• Be careful when handling the moving parts of the reading table.
• The i-See requires little or no maintenance. If you want to clean
the exterior of the device, only use a dry cloth. The use of aggressive
cleaning products like alcohol, acetone or other chemical substances
is prohibited.
•
Do not use the i-See as a support for walking, sitting down or getting up.
• Switch off the device if you do not intend to use it.
• Ensure that the i-See is placed in a well ventilated room.
• Place the i-See on a stable surface to prevent it from falling.
• Only use your i-See indoors. Do not expose the device to extreme
temperature uctuations or humidity. Do not place your i-See next
to a heat source or in direct sunlight.
• Only use the supplied cables and connect the power cable to an
earthed socket.
• Please ensure that speakers of any audio equipment are not
placed too closely to the monitor.
• Ensure that the i-See is placed at a minimal distance of 10 cm /
4 inches from the edge of the table.
Monitor
Control interface
User Manual V1.48F 5
EN
3 Controls
The on/off switch of the i-See is located on the right hand side of
the pillar.
The control interface contains all the controls of the i-See. The
control interface is available in 3 versions: a version with both push
and turn knobs (standard), a version with only push buttons and a
version with only turn knobs.
In this manual you will nd an explanation for both the push buttons
and the turn knobs. Follow the control instructions in this manual
according to what control interface version your i-See contains.
i-See Special
6
EN
Zooming
Turning knob
Turn the knob
to the right to
zoom in. Turn
the knob to
the left to zoom out.
Push button
By pressing
the plus but-
ton several
times you can
zoom in. By pressing the minus
button several times you can
zoom out.
Preferred zoom setting
While reading texts and looking at images, you require a zoom
setting that suits your needs. The i-See contains a function that
memorizes these preferred zoom settings for you.
This means that when you switch from the photograph mode to
a text mode, the i-See will automatically switch to the last zoom
setting you used in the text mode. The same goes when you switch
from a text mode to the photograph mode – the device will auto-
matically switch to the last zoom setting you used while viewing
photos.
Blocking the autofocus
The i-See will always automatically focus on the object on the
tableau. However, in certain situations (like during writing), it can
be useful to block the autofocus.
Turning knob
Push the knob to block the
autofocus. Turn the knob in
either direction to unblock
the autofocus.
Push button
Push both zoom buttons
simultaneously to block the
autofocus. Press either zoom
button once to unblock the
autofocus.
User Manual V1.48F 7
EN
Display modes
Push button
Press the button
several times to
select different
display modes. Keep the
button pressed for 3 seconds
to switch between the pho-
tograph or reading mode you
used last.
You can nd a detailed over-
view of the available display
modes in the technical spec-
ications section of this
manual.
Turning knob
Push the knob to
choose between
using photograph
modes or reading modes. The
mode you used last will then
automatically be selected.
Subsequently turn the knob to
select the different individual
display modes.
You can nd a detailed over-
view of the available display
modes in the technical spec-
ications section of this
manual.
Contrast / Brightness
Turning knob
Turn the knob
to the right to
increase the
contrast of the image on your
screen. Turn the knob to the
left to decrease the contrast
of the image on your screen.
By keeping the button pressed
and turning it, you can change
the brightness of the screen.
Push button
Push the button
several times to
set the contrast
of the image on your screen.
By keeping the button pressed
and using the zoom buttons,
you can change the bright-
ness of the screen.
i-See Special
8
EN
Brake handle
Underneath the tableau of the i-See you will nd a single brake
handle with which you can control the movability of the tableau.
The handle has 3 positions:
Left = all movement of the tableau is blocked
Middle = the movement from front to back (Y-direction) is blocked
Right = the tableau can be moved freely
Reading aid
Push buttons
By pressing
both buttons
simultaneously,
you can choose between
3 different reading aids: a
reading line, a horizontal and
a vertical block blank. You can
now use both buttons to ne
tune your chosen reading aid.
By pressing both buttons
simultaneously for 2 seconds,
you can immediately switch
your chosen reading aid on or
off.
Turning knob
By pushing the
knob you can
choose between
3 different reading aids: a
reading line, a horizontal and
a vertical block blank. By sub-
sequently turning the knob
you can ne tune your chosen
reading aid.
By keeping the knob pressed
for 2 seconds, you can
immediately switch your
chosen reading aid on or off.
Tableau
The i-See contains a tableau on which you can place your reading
material. The tableau can move from left to right (X-direction) and
from front to back (Y-direction).
Andere Handbücher für i-See
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Rehan Dokumentenkamera Handbücher
