Rekluse RadiusCX Handbuch

READ ME FIRST

Doc ID: 193-712A

Doc Revision: 061317

Several crucial steps must be understood and performed to ensure your RadiusCX

clutch will function properly. Failure to properly install, break-in and maintain your

clutch components will result in premature wear or failure.

New Friction Disk Break-In Procedure

Failure to follow the break-in procedure and oil filter inspection process

could cause motor oil delivery failure which can result in motor failure,

serious injury, or death.

•DO NOT install a new set of friction disks and ride without following the break-

in procedure and oil screen inspection process found in the installation

manual.

Soak the new friction disks in oil.

Install the new clutch pack and set the installed gap.

Check and verify Free Play Gain.

Preform the break-in procedure found in the installation manual.

Follow the oil filter inspection process found in the installation manual.

Clutch Lever Optimization – for External Adjustment Method

With this product, the installed gap can be set using either an internal or external

adjustment method. For the external adjustment method, the clutch cable is

always tight, and the clutch lever pulled tight against its perch. Some brands of

stock bikes have adjustable-reach levers. It is important when setting up any

adjustable-reach lever to adjust the lever position first, and then adjust Free Play

Gain (FPG) second. If you were to do this in reverse, the FPG setting would be

altered when changing the lever reach, which could cause poor performance and

early clutch wear.

•Rekluse offers an adjustable-reach lever upgrade for most cable-actuated

bike models. This optional upgrade provides the user with the ability to

optimize the clutch lever position for your hand size and personal preference.

This will optimize clutch lever feel for each individual. See the LEVER

OPTIMIZATION section in the manual for more details.

Checking Free Play Gain

Check Free Play Gain at the start of each ride. Details can be found in the

installation manual.

•Understand how to properly check for Free Play Gain.

•Do not ride if you cannot verify Free Play Gain, as the clutch may seem to be

working fine but could be slipping excessively. Reset the installed gap using

the steps in the installation manual.

READ ME FIRST

Doc ID: 193-712A

Doc Revision: 061317

Several crucial steps must be understood and performed to ensure your RadiusCX

clutch will function properly. Failure to properly install, break-in and maintain your

clutch components will result in premature wear or failure.

New Friction Disk Break-In Procedure

Failure to follow the break-in procedure and oil filter inspection process

could cause motor oil delivery failure which can result in motor failure,

serious injury, or death.

•DO NOT install a new set of friction disks and ride without following the break-

in procedure and oil screen inspection process found in the installation

manual.

Soak the new friction disks in oil.

Install the new clutch pack and set the installed gap.

Check and verify Free Play Gain.

Preform the break-in procedure found in the installation manual.

Follow the oil filter inspection process found in the installation manual.

Clutch Lever Optimization – for External Adjustment Method

With this product, the installed gap can be set using either an internal or external

adjustment method. For the external adjustment method, the clutch cable is

always tight, and the clutch lever pulled tight against its perch. Some brands of

stock bikes have adjustable-reach levers. It is important when setting up any

adjustable-reach lever to adjust the lever position first, and then adjust Free Play

Gain (FPG) second. If you were to do this in reverse, the FPG setting would be

altered when changing the lever reach, which could cause poor performance and

early clutch wear.

•Rekluse offers an adjustable-reach lever upgrade for most cable-actuated

bike models. This optional upgrade provides the user with the ability to

optimize the clutch lever position for your hand size and personal preference.

This will optimize clutch lever feel for each individual. See the LEVER

OPTIMIZATION section in the manual for more details.

Checking Free Play Gain

Check Free Play Gain at the start of each ride. Details can be found in the

installation manual.

•Understand how to properly check for Free Play Gain.

•Do not ride if you cannot verify Free Play Gain, as the clutch may seem to be

working fine but could be slipping excessively. Reset the installed gap using

the steps in the installation manual.

Andere Handbücher für RadiusCX

Inhaltsverzeichnis

Andere Rekluse Motorradzubehör Handbücher

Rekluse

Rekluse EXP Bedienungsanleitung

Rekluse

Rekluse EXP Montageanleitung

Rekluse

Rekluse EXP Kurzanleitung

Rekluse

Rekluse TorqDrive Clutch Pack Bedienungsanleitung

Rekluse

Rekluse RadiusCX Bedienungsanleitung

Rekluse

Rekluse CoreEXP 3.0 Bedienungsanleitung

Rekluse

Rekluse RADIUSX Bedienungsanleitung

Rekluse

Rekluse CoreManual TorqDrive Bedienungsanleitung

Rekluse

Rekluse RadiusX FTR 1200 Bedienungsanleitung

Rekluse

Rekluse RadiusX Clutch Bedienungsanleitung

Rekluse

Rekluse RadiusX Clutch Bedienungsanleitung

Rekluse

Rekluse Core EXP 2.0 Bedienungsanleitung

Rekluse

Rekluse TorqDrive Handbuch

Rekluse

Rekluse CoreManual Bedienungsanleitung

Rekluse

Rekluse RADIUSX BMW F650 Bedienungsanleitung

Rekluse

Rekluse RadiusX BMW S1000 Bedienungsanleitung

Rekluse

Rekluse RadiusX Clutch Bedienungsanleitung

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

3M Speedglas 9100 MP Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

Sperian

Sperian Optrel p420 Bedienungsanleitung