Renau T-2268 Bedienungsanleitung

INSTRUCTION MANUAL

2023

6.8” SMART KITCHEN TIMER

T-2268

SKT

SMART KITCHEN TIMER

We Do More Than Design, We Invent

2 3

Smart Kitchen Timer (SKT) Instruction Manual

The Kitchen

Timer of the

Future Has

Arrived

Safety and General Information

Accessing the Conguration Tool

Creating a Group

Creating an Item

Duty Cycles Explained

Creating Job Aids

Pairing SKTs

Messages

Custom Icons

Sending Conguration to the SKT

Creating Transferable Items

Mounting Bracket Installation

Frequently Asked Questions

Glossary

Specications

Warranty and Technical Support

Accessing and Navigating the SKT Menu

Uploading/Downloading Conguration Files

Adding a Gateway and Wireless Sensor Modules

Operating the SKT

5-6

8-9

18-19

21-22

23-25

29-30

SKT

4 5

Clean only with a damp cloth. No detergents or substances containing alcohols or solvents may

be used to clean this device.

This device meets the emission and immunity requirements of PN-EN IEC 55014-1: 2021 on the

EU market.

Safety and General Information

Cleaning and Care:

General:

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

Caution:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

FCC Compliance:

Warning: You must use the included power supply and WiFi dongle, or a Renau

approved replacement. Use of a third-party power supply or WiFi dongle or any

other replacement not approved by Renau will void the warranty.

Warning: Aside from the included Renau WiFi Dongle or third-party ash drive,

never connect any other devices to the USB port of the Smart Kitchen Timer.

Doing so will void the warranty.

Accessing the Conguration Tool via Browser

Programming of the Smart Kitchen Timer (SKT) is not done on the unit itself, but through

the Conguration Tool. The Conguration Tool is accessed wirelessly on your web browser by

navigating to the SSID Screen on the SKT and connecting your computer to its unique SSID.

The Conguration Tool is used to add and edit programming such as: Groups, Items, Timers,

Job Aids, and pair Wireless Sensor Modules and Gateways.

1. Connecting on rst boot up: Place the SKT next to the computer you plan to use to

connect to the Conguration Tool. Connect the included power supply to the back of the

SKT and insert the plug into a wall outlet. Initial power up may take up to 30 seconds.

Once the SKT has powered on, rotate the screen by tapping on the blue button until the

desired orientation is set. Once nished, tap “Next.” Continue with steps 2-6.

Accessing the Conguration Tool After Initial Setup: Hold the “RENAU” logo on the

SKT to access the menu, enter the PIN number, tap “Setup,” and select “Recongure

Device.” Continue with steps 2-6.

Note: The pre-programmed PIN number to access the SKTs menu is 4444.

If you would like to change this number, you may do so later in the SKT menu.

2. Select the desired Operating Mode:

Connected: Allows for pairing and communication between multiple SKTs. If you plan to

this is functionality and this is the primary SKT, select “Master”.

Standalone: Allows for the SKT to work as a single standalone device.

3. You will now land on the SSID Screen. This is a very important screen as you will need

to return to this screen after initial programming to connect back to the Conguration

Tool. When on this screen, the SKT will broadcast its SSID and allow connection to the

Cong Tool. You will see displayed on this screen your SKT’s unique SSID, an IP Address,

and a 4-digit Conguration Tool PIN. You will follow the steps displayed on the screen

to connect to the Conguration Tool. Once connected to the Cong Tool, the SKT must

remain on the SSID Screen to stay connected.

Note: Before getting started, ensure that the Wi-Fi Dongle provided in the packaging is inserted

into the USB port on the SKT.

6 7

4. Open the Wi-Fi settings on your computer and connect to the Wi-Fi network matching the unique

SSID displayed on your SKT. If your computer is currently using Wi-Fi to access the internet, you will

lose your internet connection for the duration of programming through the Cong Tool. If you are

connected to the internet via Ethernet cable, you will not lose your connection.

Note: When connecting your PC to the SSID displayed on the SKT, you may initially see in your

Wi-Fi settings that the network is locked. If this is the case, simply close the network selection

window, wait a few seconds, and then reopen it until you see that the network is open.

5. After the Wi-Fi connection has been established, open a web browser and enter the IP address

listed on the SKT screen into the browser bar to access the Conguration Tool. This IP address can

be bookmarked for future use.

Tip: The Conguration Tool has been optimized for Google Chrome, Firefox and Safari browsers.

Microsoft Edge is not recommended.

Note: The SKT should remain on the SSID Screen for the duration of programming with the

Conguration Tool. If at any point during programming the SKT is powered down, or you exit the

SSID screen, the SKT will lose its connection. To return to the SSID screen, access the menu on

the SKT and tap “Recongure Device” inside the “Setup” tab. If you accidentally skipped ahead

to the “Device Assignment” or “Conguration Summary” page, simply tap the “Back” button

on the SKT until you return to the SSID Screen. Reconnect the SKT to the Conguration Tool to

continue.

6. Login with the 4-digit PIN

provided on the SKT to access

the Conguration Tool.

This PIN number will be

unique each time you access

the SSID Screen on the SKT.

You will now land on the Conguration Tool dashboard. You will continue with all programming on the

Cong Tool with the SKT remaining on the SSID Screen until after you have sent your conguration to

device. To help familiarize yourself with the Conguration Tool, follow the Tutorial at the bottom of this

page. You can also nd instructional videos on renau.com.

Accessing the Conguration Tool (cont.) Creating a Group

The SKT allows for the programming of 16 Groups with the ability to display up to 5 Groups on

the SKT. Food Groups are useful for navigating larger menus by grouping and categorizing

items which are similar or related.

1. Connect to the Cong Tool and click “Food Groups” in the “Components” side menu.

2. Click “+ Add Group,” then enter the desired Group name and Group label before saving by

clicking the oppy disk icon.

3. Repeat as necessary for any additional Food Groups.

Note: Groups will be displayed on the SKT as the given Group Label.

8 9

Creating an Item

Creating an Item (cont.)

The SKT allows for the programming of up to 1000 items on a single device, and up to 8 duty cycles and

messages for a standard timer. Items can be anything from food and ingredients, to tasks and reminders.

To create a new item, rst access the Conguration Tool, click “Items” in the “Components” menu, then

click “Add Item” to begin the item creation process. Before continuing, decide whether you would like to

create a Standard timer, a Daily Based Timer, or a Continuous Timer.

Standard Timer: This is the default timer when creating a new item. When enabled, a Standard Timer will

count down from the set total time, display the desired alert message(s), and then complete once the

nal message is cleared by the user.

1. First, enter the desired item name.

2. Click the “+” button under the message label, enter the desired cook/hold time, enter the message

you would like displayed upon timer completion and select “Create” or simply hit the Return key on

your keyboard. Repeat as necessary for any additional duty cycles.

Tip: You can also manage all of your programmed messages through the “Messages” tab in the

Components menu. Adding messages in this menu also provides the option to add the same

message translated to the desired language.

3. Click the “Add Icon” button and select the desired icon from the library, or drag and drop the le from

your computer.

4. Select the Group you would like to associate the item with or select “Non-Group.”

Tip: If you would rather have an item visible on the SKT screen at all times, selecting Non-Group

would be the preferred option.

5. Lastly, save your changes by clicking the oppy disk icon.

Daily Based Timer: This creates a timer for which an alert will be displayed every day at the specied

time. You also have the ability to select multiple times of the day for which you would like to receive

the alert. Daily Based Timers cannot be added to a group.

Continuous Timer: Selecting this option will create a timer that will repeat at a specied interval.

Continous Timers will begin counting down as soon as the SKT is powered on. Once the timer ends

and is cleared by the user, it will automatically restart.

10 11

Duty Cycles Explained

Within a single item, you can add up to 8 duty cycles with corresponding action messages.

Duty cycles are useful for processes that require more than one step to complete.

In this example, we will show three duty cycles for cooking a chicken breast.

1. After 6 minutes of cooking, the user will receive an alert to ip the chicken.

2. After 12 minutes of cooking, the user will receive an alert to turn the chicken.

3. Lastly, the user will receive an alert after 18 minutes of cooking to remove the chicken.

Note: After saving the item, the duty cycles will be arranged in chronological order.

Sending Conguration to the SKT

Once you are nished creating your items, you will need to create the Device and arrange the

items how you would like them displayed on the SKT’s screen.

1. To begin, click the “+” under the “Devices” tab. Continue with naming the Device or

“Station,” set the screen orientation, select device type and make any other desired

changes. Once completed, click “Next Step.”

2. On this next page you will drag the items from your item list, drop them onto the mock

SKT screen and arrange them as desired. When nished, click “Save Device.”

3. Now, you will send your conguration to the SKT by clicking “Send to Device” on the side

menu. Click “Yes” when prompted to “Send Conguration to Device.”

4. Once the Conguration has been uploaded successfully, tap “Next” on the SKT. Tap the

device name to assign it to the proper “Station,” tap “Next” and lastly tap “Save and Exit”

to nish.

Note: If you are in Connected mode, you will also encounter the Pairing Screen in step 4.

If you have any SKT’s you would like to pair, see page 13.

12 13

Creating Job Aids Messages

The SKT allows for the programming of up to 200 Job Aids, which can be anything from build

cards to equipment cleaning or troubleshooting instructions. Included below is a diagram

showing where and how information from the Job Aid will be displayed on the SKT.

1. Access the Cong Tool and click “Job Aids” in the Components menu. Click “+ Add Job

Aid,” and enter the desired name for the Job Aid. If needed, there are 2 elds to input any

unique label(s) for your Job Aid which can be alternate names, product weight, or KDS

codes. Otherwise, leave these elds blank.

2. Enter the Job Aid name. Add any unique label(s) for your job aid.

3. Next, we will add the steps required to perform the Job Aid. Start by selecting an icon that

best represents the rst step or ingredient and enter a description or name as the “Top

Text”. The “Bottom Text” eld can be used to specify the ingredient amount, or tool used in

this step of the process. You may also add an “Action Icon” to represent this action.

4. Repeat as necessary for any additional steps. When nished, save the Job Aid by clicking

on the oppy disk icon.

The Messages tab on the Conguration Tool is used to add translations for alert messages.

You can also delete and make changes to existing messages in this area as well.

To add a Message, click “+ Add Message,” select the desired primary language, enter the desired

Message, and provide the secondary language translation before clicking the oppy disk icon

to save.

Job Aid

Label 1

Label 2

Product Icon

Top Text

Bottom Text

Action Icon

14 15

The Conguration Tool allows users to upload a company logo, as well as images to use as Icons

on the SKT. These images can be in the same clip art style as those found in the Icon library, or live

images. In order to prepare images for use as Icons, either you or someone else in your organization

will need some basic understanding of image editing, as well as access to image editing software.

All images uploaded to the Cong Tool must be in PNG format with equal dimensions.

Preparing an Image for Use as an Item Icon: Images which will be used as Icons for Items can be

a circle shape of the image layer to maximize size. The smallest size/pixel dimension without loss of

image quality is 128 pixels x 128 pixels.

Preparing an Image for Use as a Job Aid Icon: Job Aids utilize both a Product Icon and an Action

Icon. The recommended size for Product Icons is 250 pixels x 250 pixels. The recommended size for

Action Icons is 128 pixels by 128 pixels.

Once you have prepared your images, connect your SKT to the Cong Tool and follow these steps:

1. Click the “Icons” tab in the Components menu.

2. If you would like to rst upload your company logo, click “+Add File” and select the image on

your computer. You can also drag and drop the le into the box above.

3. Next, click “+ Add Icons” and select the les, or drag and drop them into the box above.

Note: Uploading large le sizes can slow down the Conguration Tool’s performance.

Tip: Renau oers the service of creating custom Icons for your SKT.

Please call for more information.

Pairing SKTsCustom Icons

Users have the ability to pair 7 additional SKTs with their primary SKT. The main reason for pairing

SKTs is to transfer completed timers between SKTs at dierent Stations. Additional SKTs do not

need to be individually programmed, they will automatically download the Conguration File of the

primary SKT. You must have the WiFi dongle inserted into the USB port of all devices at all times

to utilize this functionality.

1. Power up all SKTs you would like to pair. Select “Connected” as the operating mode on all

units.

2. Select “Master” as the device type on the primary SKT and select “Slave” as the Device Type

for the additional SKT(s). Continue by connecting the primary SKT to the Conguration Tool.

3. Continue by connecting the primary SKT to the Conguration Tool.

4. Once the primary SKT is connected to the Conguration Tool, proceed by creating all items

you will be adding to the additional SKT(s). Click “+” under the Devices tab and set the

Device Conguration for the additional SKT. Populate the SKT mock screen with the items

corresponding to this Device before clicking “Save Device.” Repeat this step as necessary

for any additional SKTs. Once nished, click “Send to Device.”

5. At this point, you may close the Conguration Tool and continue with setup on the SKTs.

Tap “Next” on the primary SKT and wait until the Device name(s) of the SKTs you wish to pair

show up on the screen. It may take up to a minute for the primary SKT to display all available

units for pairing. Once visible, tap “Pair.” You will receive a message on the screen(s) of the

additional SKT(s) once pairing has been successful. Tap “Next” on all SKTs and assign them

to the corresponding stations. Tap “Next,” then “Save and Exit”.

You will receive a message on the screen(s) of the additional SKTs once pairing

has been successful.

Tap “Next” on all SKTs and assign them to the corresponding stations. Tap “Next”,

then “Save and Exit”.

Note: For large congurations, it may take up to a few minutes for additional SKTs

to download the Conguration File from the primary SKT.

6. Once powered back up, the connection status indicator will initially be red on all paired SKTs

but should turn green after 20-30 seconds. You are now ready to create transferable items.

16 17

Creating a Transferable Item

1. Connect to the Conguration Tool with the primary SKT and create separate Groups

for the transferable Items. Next, create the Item for the product you would like to be

transferable and assign it to the proper Group. Next, create a duplicate of the Item, and

simply replace the timer(s) and alert message(s), add any additional duty cycles, and

assign the Item to the proper Group.

Note: When creating a transferable Item be sure to use the same name for both items.

The times, messages, and icon, however, do not need to match.

2. If you haven’t already created and congured a Device for the primary and additional

SKTs, do so now and populate the mock screens with your items as desired. To help

distinguish between the transferable items, lter them by Group. Save when nished and

send the conguration to device.

3. At this point you may close the Conguration Tool, tap “Next” on the SKT, assign it to the

proper station, tap through the remaining screens until the SKT restarts.

Note: Be sure to update any paired SKTs with the new congurations by tapping the

ashing exclamation mark next to the connection status indicator.

Uploading/Downloading Conguration Files

It is highly recommended that once you have nished programming your SKT you create a

backup Conguration File of your programming. Creating a copy of your conguration is also

useful for quickly programming multiple SKT’s utilizing the same conguration, and as a backup

in case your SKT is damaged or lost.

1. In the Conguration Tool, click “Download/Upload” at the bottom of the side menu and

click “Download”. This will create a Conguration le in the downloads folder on your

computer. If you plan on renaming the Conguration File, you must use underscores

in places of spaces in the le name.

2. To upload this conguration le onto a SKT, insert a ash drive containing the le into the

USB port of the SKT. Access the SKT’s menu, swipe up and tap “Upload Conguration”.

Once the le name is recognized, tap “Upload”. Alternatively, you can also upload a le

through the Conguration Tool by clicking “Upload” in the “Download/Upload” tab.

Note: Be sure to rst send the conguration to device before downloading

the Conguration File.

18 19

Adding a Gateway and Wireless Sensor Modules

The SKT allows for the pairing of up to 64 Wireless Sensor Modules (WSM’s) per unit. Adding Wireless

Sensor Modules to the SKT adds the ability to monitor and set alerts for temperature and/or

humidity. A Gateway is required in order to use WSM’s with the SKT. You will also need a blank ash

drive formatted as “FAT32.” Before conguring the Gateway, you will rst need to pair your WSM(s)

to the SKT using the Conguration Tool. Before continuing, make sure batteries are inserted into

the WSM(s) you wish to pair, and that the Gateway is powered on.

1. First, access the Cong Tool and select “Gateway/Sensors” under the “Managers” tab. Once the

WSM’s are prepped, click “+ Add Sensor.”

2. With WSM in hand, click the “NFC” button and hold the Wi-Fi logo on the Sensor Module to the

NFC logo on the top right of the SKT. It’s important to hold the Sensor Module still during this

process. After a few seconds, you will receive a popup in the Conguration Tool displaying the

WSM’s information. Click “Accept” to add the Module.

3. Next, click the “+” under “Probes” to congure the probe(s) connected to this WSM. Select the

icon you would like to represent the probe(s) and add a name as you would like it displayed on

the SKT. Select the proper probe type and leave the Index at 1. The Probe Oset should be left

at 0.

Adding a Gateway and Wireless Sensor Modules (cont.)

7. Next, insert a blank ash drive (formatted as FAT32) into your computer and locate the

Gateway Conguration File in your downloads folder. Move the le onto the ash drive

before ejecting the drive and inserting it into the Gateway. Depending on how many WSM’s

you are adding to your system, the le may take up to 30 seconds to upload to the Gateway.

The LED on the Gateway will pulse on and o in 3 second intervals when the upload has

nished. However, it is recommended to leave the ash drive inserted into the Gateway until

you receive readings on the SKT.

Note: It may take a few minutes for the WSM(s) to connect to the Gateway and begin sending

data to the SKT.

Tip: To dierentiate between multiple Gateway cong les, create a folder with the desired

name and insert the cong le.

4. To add an alert for this probe, click “+ Add Alert,” input the desired message, and select

the “Condition” and “Value” which will trigger the alert. By default, the alert will be set

to “On.” If you would like to disable alerts for this probe, simply select “O.” Add any

additional alerts to this probe as needed. Once complete, click the oppy icon to save.

Repeat these steps as needed to pair additional WSM’s.

5. Continue by clicking the name of the SKT you would like the WSM(s) to be displayed on

under the Devices tab. Proceed with populating the mock SKT screen with the new Probe(s)

before clicking “Save Device.” Now, click “Send to Device” and return to the Gateway/

Sensors tab.

6. Click “Gateway File Export” and select “Yes” when prompted. The resulting downloaded le

will be “cong.zip.”

Tip: To dierentiate between multiple Gateway cong les, create a folder with the desired

name and insert the cong le.

Inhaltsverzeichnis

Andere Renau Timer Handbücher

Renau

Renau SKT T-2268 Bedienungsanleitung

Beliebte Timer Handbücher anderer Marken

Intermatic

Intermatic P1131 Bedienungsanleitung

Learning Resources

Learning Resources Time Tracker mini Bedienungsanleitung

CEBEK

CEBEK I-215 Bedienungsanleitung

Somogyi

Somogyi home TS MD 5 Bedienungsanleitung

Profile

Profile 010200280 Bedienungsanleitung

Gizmo

Gizmo T4 Bedienungsanleitung

Tekmar

Tekmar Timer 031 Bedienungsanleitung

Daikin

Daikin DST301B61 Bedienungsanleitung

sisel

sisel ENDA ETM2432 Bedienungsanleitung

B&Q

B&Q TE103 Bedienungs- und Wartungshandbuch

Hozelock

Hozelock AC Plus 2700 Bedienungsanleitung

GIC

GIC Eliro V7DDSS3Eliro V7DFTS3 Bedienungsanleitung

Tork

Tork TU40 Bedienungsanleitung

Emos

Emos EMT400F Bedienungsanleitung

FarmTek

FarmTek Polaris Bedienungsanleitung

Maximum

Maximum CRONUS Bedienungsanleitung

Uberhaus

Uberhaus TD133B Bedienungsanleitung

Clas Ohlson

Clas Ohlson 31-3766 Bedienungsanleitung