RenewAire TC7D Series Betriebsanleitung

TC7D-W Wall mount

TC7D-E Enclosure

TC7D-W (Wall Mount)

TC7D-E (Enclosure)

TC7D SERIES DIGITAL TIME CLOCK

Supplemental Installation Manual for Accessories

1.800.627.44992

TC7D Series Digital Time Clock

ACCESSORY

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO

PERSONS, OBSERVE THE FOLLOWING RULES:

Use the unit only in the manner intended by the manufacturer. If

you have questions, contact the manufacturer.

Before installing, servicing or troubleshooting the transformer/re-

lay package, switch power off at service panel and lock service

panel to prevent power from being switched on accidentally.

More than one disconnect switch may be required to de-energize

the equipment for servicing.

Installation work and electrical wiring must be done by qualiﬁed

person(s) in accordance with all applicable codes and standards,

including ﬁre-rated construction codes and standards.

When cutting or drilling into wall or ceiling, do not damage elec-

trical wiring and other hidden utilities.

NEVER place a switch where it can be reached from a tub or

shower.

Intended for use with 24 VAC Class 2 power supplies only.

Do not connect loads that exceed the timer’s switch rating.

Conﬁrm sufﬁcient 24 VAC power is available to operate the timer

and the connected loads.

CAUTION

31.800.627.4499

TC7D Series Digital Time Clock ACCESSORY

1.0 OVERVIEW 4

1.1 SPECIFICATIONS..................................................................................................4

1.2 DIMENSION DRAWINGS .......................................................................................4

2.0 SETTINGS 5

2.1 SETTING INSTRUCTIONS......................................................................................5

3.0 ELECTRICAL 6

3.1 ELECTRICAL SCHEMATICS ...................................................................................6

TABLE OF ILLUSTRATIONS

Figure 1.2.0 TC7D-W Dimensions........................................................................................................4

Figure 1.2.1 TC7D-E Dimensions.........................................................................................................5

Figure 2.1.0 Setting Instructions .........................................................................................................5

TABLE OF SCHEMATICS

Figure 3.1.0 EV90, EV90P, EV130, EV200 and EV300 Schematic .........................................................6

Figure 3.1.1 SL70 Schematic ..............................................................................................................6

Figure 3.1.2 EV450, HE1XIN and HE1.5IN Standard Wiring Schematic ..................................................6

Figure 3.1.3 EV450 ECM Schematic ....................................................................................................7

Figure 3.1.4 HE1X and HE1.5 ECM Schematic......................................................................................7

Figure 3.1.5 HE1XRT, HE1.5RT with Independent Blower Control and HE2X through LE10X Schematic ..7

Figure 3.1.6 RH-W Electric Heater Schematic ......................................................................................7

TABLE OF CONTENTS

1.800.627.44994

TC7D Series Digital Time Clock

ACCESSORY

Operating Voltage: 24VAC 50/60Hz

Switching: Single Pole, Single Throw [SPST]

(can be ﬁeld-modiﬁed to Single Pole, Double Throw [SPDT])

Power consumption: 3.5VA

Switch rating: 10 Amps at 131°F

Operating Temperature Range: 14°F – 131°F

Connections (TC7D-W): (3) 16 GA pigtails (wire nuts not provided)

Connections (TC7D-E): (3) copper screw terminals

Setting Options:

u8 pairs of on-off time of day cycles can be programmed.

uEach on-off cycle can be assigned to any one day of the week, or to the following groups of days:

Monday – Friday; Monday – Saturday; Monday – Sunday; Saturday and Sunday.

uManual Over-ride provided by “On/Auto/Off” switch.

uProgram Reset button clears all settings.

Enclosure (TC7D-W): Requires a 4" x 4" electrical box by others.

uBox must accommodate (4) mounting screws (see drawing).

uMinimum box depth 1.5". White wall plate and mounting screws provided.

Enclosure (TC7D-E): NEMA 3R. (see drawing page 4)

OVERVIEW

1.0 OVERVIEW

1.1 SPECIFICATIONS

4 1/2"

1 13/16"

3 5/16"

1.2 DIMENSION DRAWINGS

FIGURE 1.2.0 TC7D-W WALL MOUNT DIMENSIONS

51.800.627.4499

TC7D Series Digital Time Clock ACCESSORY

DIMENSIONS ARE APPROXIMATE.

.8750

1.250

7.0 ACCESS

2.750

.940

1.250

6.150

2.060

4.120

1.250

2.500

8.040

ISOMETRIC VIEW

FRONT VIEW

.955

.938

1.875

ø0.8750

Knockout

ø1.1250

Knockout (5)

ø0.2580

Thru

SETTINGS

FIGURE 1.2.1 TC7D-E ENCLOSURE DIMENSIONS

Set Time and Day Slide Set switch to press 1…7 button until arrow points to the correct day

(1=Monday). Press h then m buttons to set correct time. PM indicator shows

noon to 11:59 PM. Slide Set switch to Run. Clock colon will blink.

Set Switch “On” Cycle Slide Set switch to . A “1” indicates the first switch cycle and a “Bulb”

indicates a switch-on (circuit closes). Press 1…7 button until arrows point to

selected day(s) for this cycle. Press h and m buttons to show switch-on time,

noting PM indicator.

Set Switch “Off” Cycle With Set switch at , press button, note switch cycle number changes to

“2” and bulb blanks, indicating switch-off (circuit opens). Press 1…7 button

to match day(s) set for switch cycle “1.” Press h and m buttons to select

switch-off time.

utorun Slide Set switch to Run and Mode switch to Auto, switching begins with next

switch-on set time.

Override “On” Slide Mode switch to I. Switch remains on indefinitely (circuit closed).

Override “Off” Slide Mode switch to O. Switch remains on indefinitely (circuit open).

Skip Cycle In automatic run mode, press

→button. The next calendar day is skipped.

Setting ERROR If EEE appears, a setting error exists. The switch cycle number in error is

shown. Slide set switch to , press button until cycle is shown, review

this and the following setting to correct error, slide set switch to Run.

Clear any setting Setting slide set switch to , press button to show switch cycle to clear.

Press the button and the skip (x) button simultaneously, hold for several

seconds.

Clear All To erase all settings, Press R.

2.0 SETTINGS

2.1 SETTING INSTRUCTIONS

FIGURE 2.1.0 SETTING INSTRUCTIONS

1.800.627.44996

TC7D Series Digital Time Clock

ACCESSORY

FIGURE 3.1.0 EV90, EV90P, EV130, EV200, EV240, EV300 SCHEMATIC

TC7D-WTC7D-E

BLACK

RED

YEL

24 VAC

ERV INTERNAL CONTROL

WIRING (SIMPLIFIED)

COMM

HIGH OR LOW

SPEED INPUT

SL70

ELECTRICAL

3.0 ELECTRICAL

3.1 ELECTRICAL SCHEMATICS

FIGURE 3.1.1 SL70 SCHEMATIC

Control Terminals

Unit Internal

Wiring

Not Shown

EV90

EV90P

EV130

EV200

EV240

EV300

24VAC Class II Power Supply

provided by other

TC7D-WTC7D-E

EV Residential

TC7D-WTC7D-E

BLACK

RED

YEL

BLUE

RED

YELLOW

The Normally Closed (N.C.) contacts of

one or more additional Low Voltage

Controls may be connected to ERV unit in

parallel with the TC7D-E/W.

Unit's 24VAC

Power Supply

ERV INTERNAL CONTROL

CIsolation

Relay Coil

WIRING (SIMPLIFIED)

BLUE

YEL

RED

EV450 , 1X,

1.5IN

FIGURE 3.1.2 EV450, HE1XIN AND HE1.5IN STANDARD WIRING SCHEMATIC

NOTE: For EV450

and HE1XIN mod-

els built prior to

1/22/2011, please

call RenewAire Customer

Service at 800-627-4499

or email RenewAireSup-

port@RenewAire.com.

NOTE: There is a

wire on the TC7D

that connects

terminal 1 to terminal 5.

You must cut this wire

to eliminate voltage to

terminal 5.

71.800.627.4499

TC7D Series Digital Time Clock ACCESSORY

ELECTRICAL

The Normally Closed (N.C) contacts of one

or more additional Low Voltage Controls

may be connected to ERV unit's Terminals 1

& 4. Do not apply power to these terminals.

Unit's 24VAC

Power Supply

ERV INTERNAL CONTROL

Isolation

Relay Coil or

Damper

Actuator Coil

WIRING (SIMPLIFIED)

TC7D-WTC7D-E

BLACK

RED

YEL

1X, 1.5RT-LE

FIGURE 3.1.5 HE1XRT, HE1.5RT WITH INDEPENDENT BLOWER CONTROL AND HE2X THROUGH LE10X SCHEMATIC

24VAC Class II Power Supply

provided by other

TC7D-WTC7D-E

4 3 2RC

0-10VDC

24 VAC

COMMON

RH-W

CTH-291

0-10VDC THERMOSTAT

Supplied with RH-W Heaters

When Normally Closed (NC) contacts open at desired times, the thermostat

will operate in Comfort Mode. When NC contacts are across RH-W

thermostat terminals the thermostat will operate in Economy Mode which

reduces the RH-W heater outlet set-point temperature by 8 degrees F.

NOTE: Remove

supplied wires from

the time clock spade

terminals prior to

wiring to a RH-W thermostat

as shown.

FIGURE 3.1.6 RH-W ELECTRIC HEATER SCHEMATIC

NOTE: For HE1XRT

and HE2X through

LE10X models built

prior to 1/22/2011,

please call RenewAire

Customer Service at

800-627-4499 or email

RenewAireSupport@

RenewAire.com.

TC7D-WTC7D-E

Unit's 24VAC

Power Supply

ERV INTERNAL CONTROL

CIsolation Relay

Coil or Damper

Actuator Coil

WIRING (SIMPLIFIED)

The Normally Open (N.O.) contacts of one

or more additional Low Voltage Controls

may be connected to ERV unit in parallel

with the TC7D-E and TC7D-W.

EV450 +EC

FIGURE 3.1.3 EV450 ECM SCHEMATIC

TC7D-WTC7D-E

1X and 1.5 +EC

Unit's 24VAC

Power Supply

ERV INTERNAL CONTROL

Isolation Relay

Coil or Damper

Actuator Coil

WIRING (SIMPLIFIED)

Isolation Relay

Coil or Damper

Actuator Coil

(EA/RA)

(OA/FA)

The Normally Open (N.O.) contacts of one

or more additional Low Voltage Controls

may be connected to ERV unit in parallel

with the TC7D-E and TC7D-W.

FIGURE 3.1.4 HE1X AND HE1.5 ECM SCHEMATIC

About RenewAire

For over 30 years, RenewAire has been a pioneer in enhancing indoor air quality (IAQ)

in commercial and residential buildings of every size.This is achieved while maximizing

sustainability through our fifth-generation, static-plate, enthalpic-core Energy Recovery

Ventilators (ERVs) that optimize energy efficiency, lower capital costs via load reduction and

decrease operational expenses by minimizing equipment needs, resulting in significant energy

savings. Our ERVs are competitively priced, simple to install, easy to use and maintain and have

a quick payback. They also enjoy the industry’s best warranty with the lowest claims due to

long-term reliability derived from innovative design practices, expert workmanship and Quick

Response Manufacturing (QRM).

As the pioneer of static-plate core technology in North America, RenewAire is the largest ERV

producer in the USA. We’re committed to sustainable manufacturing and lessening our

environmental footprint, and to that end our Waunakee, WI plant is 100% powered by wind

turbines. The facility is also one of the few buildings worldwide to be LEED and Green Globes

certified, as well as having achieved ENERGY STAR Building status. In 2010, RenewAire joined

the Soler & Palau (S&P) Ventilation Group in order to provide direct access to the latest in energy-

efficient air-moving technologies. For more information, visit: renewaire.com

201 Raemisch Road | Waunakee, WI | 53597 | 800.627.4499 | RenewAire.com

Member of the S&P Group

Family of Brands

138200_006_JUN19

Andere Handbücher für TC7D Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere RenewAire Zeiterfassung Handbücher

RenewAire

RenewAire TC7D Series Bedienungsanleitung

Beliebte Zeiterfassung Handbücher anderer Marken

Dyflexis

Dyflexis Rex-O-Matic Noa Bedienungsanleitung

L’EPEE 1839

L’EPEE 1839 TIME FAST II Bedienungsanleitung

TimeMoto

TimeMoto TM-616 Bedienungsanleitung

Videx

Videx 701T Bedienungsanleitung

Kronos

Kronos Timekeeper 400 Series Betriebsanleitung

Scarlett

Scarlett SC-810 Bedienungsanleitung

Funtronix

Funtronix SCORE-N-TIME T-240 Bedienungsanleitung

IKEA

IKEA NUFFRA 10357872 Bedienungsanleitung

Multipipe

Multipipe 22-23015 Benutzerhandbuch

L’EPEE 1839

L’EPEE 1839 SUN CLOCK Bedienungsanleitung

Oregon Scientific

Oregon Scientific TW331 Bedienungsanleitung

MT Logic

MT Logic CL-471 Bedienungsanleitung

Easy Clocking

Easy Clocking XENIO 500 Handbuch

Amano

Amano MTX-15 Bedienungsanleitung

LA CROSSE CLOCK

LA CROSSE CLOCK Harper 404-3450A Bedienungsanleitung

Europa components

Europa components ET167DYD Bedienungsanleitung

TONIN CASA

TONIN CASA Opaca circle Bedienungsanleitung

CS TIMECLOCK

CS TIMECLOCK 2110 Gebrauchsanweisung