Renkforce RF-DC-1G Bedienungsanleitung

Operating instructions

GPS Dashcam RF-DC-1G

Item No. 1577620

Table of contents

Page

1. Introduction..........................................................................................................................3

2. Explanation of symbols .......................................................................................................3

3. Intended use........................................................................................................................4

4. Delivery contents.................................................................................................................4

5. Safety instructions...............................................................................................................5

a) General information......................................................................................................5

b) Rechargeable battery...................................................................................................6

6. Features and functions........................................................................................................6

7. Product overview.................................................................................................................7

8. Fitting...................................................................................................................................8

9. Connecting the power supply ..............................................................................................8

10. Charging the battery............................................................................................................9

11. Inserting a memory card......................................................................................................9

12. Operation...........................................................................................................................10

a) General functions .......................................................................................................10

b) Menu ..........................................................................................................................12

13. Connecting the device to a computer................................................................................15

a) Storage management.................................................................................................15

b) GPS tracking ..............................................................................................................15

14. Troubleshooting.................................................................................................................16

15. Care and cleaning .............................................................................................................17

16. Disposal.............................................................................................................................17

17. Declaration of Conformity (DOC).......................................................................................17

18. Technical data ...................................................................................................................18

1. Introduction

Dear customer,

Thank you for purchasing this product.

This product complies with statutory national and European regulations.

To ensure that the product remains in this state and to guarantee safe operation, always follow

the instructions in this manual.

These operating instructions are part of this product. They contain important informa-

tion on setting up and using the product. Do not give this product to a third party

without the operating instructions. Keep these operating instructions in a safe place

for future reference.

For technical queries, please contact:

International: www.conrad.com/contact

United Kingdom: www.conrad-electronic.co.uk/contact

2. Explanation of symbols

The symbol with an exclamation mark in a triangle is used to highlight important infor-

mation in these operating instructions. Always read this information carefully.

The arrow symbol indicates special information and advice on how to use the product.

3. Intended use

The dashcam is a compact video camera designed for shooting videos and photos in vehicles.

The vehicle charging cable or a suitable USB port must be used to power the camera and

charge the battery.

This product is only intended for indoor use and in protected areas of vehicles. Contact with

moisture must be avoided under all circumstances.

Always ensure that you comply with privacy protection laws. Never photograph or lm people

without their permission.

In addition, please note that using the device as a surveillance camera in vehicles may be re-

stricted or prohibited in some countries. Familiarise yourself with the relevant regulations before

using the product for the rst time.

For safety and approval purposes, you must not rebuild and/or modify this product. Using the

product for purposes other than those described above may damage the product. In addition,

improper use can cause hazards such as a re or overheating. Read the instructions carefully

and store them in a safe place. Only make this product available to third parties together with

its operating instructions.

4. Delivery contents

• GPS Dashcam RF-DC-1G

• Suction mount

• Car charging cable

• Operating instructions

Up-to-date operating instructions

Download the latest operating instructions via the link

www.conrad.com/downloads or scan the QR code. Follow the instructions

on the website.

5. Safety instructions

Read the operating instructions and safety information carefully. If you do

not follow the safety instructions and information on proper handling in this

manual, we will assume no liability for any resulting personal injury or damage

to property. Such cases will invalidate the warranty/guarantee.

a) General information

• This product is not a toy and must be kept out of the reach of children! Children do

not understand the hazards associated with the incorrect use of electrical devices.

• Do not leave packaging material lying around carelessly, as it may become dan-

gerous playing material for children.

• Protect the product from extreme temperatures, strong jolts, high humidity, mois-

ture, ammable gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, stop using it and prevent

unauthorized use. Safe operation can no longer be guaranteed if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in adverse ambient conditions or

- has been subjected to any serious transport-related stress.

• Always handle the product carefully. Jolts, impacts or a fall even from a low height

may damage the product.

• Pay attention to all additional safety information in the individual sections of these

instructions.

• Consult an technician if you are not sure how to use or connect the product.

• Maintenance, modications and repairs must be done by a technician or a special-

ist repair centre.

• If you have questions which remain unanswered by these operating instructions,

contact our technical support service or other technical personnel.

• Always read these operating instructions before using, installing, conguring or

servicing this product.

b) Rechargeable battery

• The built-in rechargeable battery cannot be removed and can only be charged

in the device. Never attempt to remove the battery and charge it with an external

charger.

• The battery must be charged with the vehicle charging cable provided, a USB

power adapter or a USB port on your computer. Using another power supply with

a different charging current may damage the camera and cause the battery to

overheat, catch re or explode.

• Charge the battery on a regular basis, even when you do not use the device

(about every 3 months). Failure to charge the battery regularly may cause the

battery to overdischarge, which can cause permanent damage.

6. Features and functions

• Automatically activates recording via the cigarette lighter

• Records to a microSD card

• 6.1 cm (2.4”) display

• Sturdy suction mount

• Large image angle with wide-angle lens

• Built-in acceleration sensor for detection of accidents (the current recording is automatically

write-protected)

• Automatic recording control via motion detection

• SOS function (the recording is write-protected when you press a button)

• WDR function (Wide Dynamic Range for better quality images in poor lighting conditions).

• GPS tracking function (GPS data is associated with the video recording)

• Zoom function

• Built-in rechargeable battery for powering the camera when there is no onboard power supply

7. Product overview

4 5 6 7 8

1 button

2 MODE button

3 Display

4 R/OK button

5 button

6 Status indicator

Red = Battery charging

Blue = Switched on

Flashing blue = Video recording

7 MENU button

8 button

9 USB data port

10 Card slot

11 Microphone

12 USB charging port

13 RESET button

14 Mounting lug

15 Lens

8. Fitting

Never install the product within the release range of an airbag or in an area where it

may impair the driver’s vision.

When installing the product, consider the risks that may arise from devices becoming

dislodged in the event of an accident. Secure the product in a place where it will not

present a danger to the driver and/or passengers.

Mounting the camera on a heated or coated windscreen may impair GPS reception.

• Clean the part of the windscreen where you wish to install the suction mount.

• Insert the suction mount into the mounting lug (13) on the camera.

• Press the suction mount against the windscreen and pull down the lever.

• Check that the suction mount is securely in place.

• Loosen the cap nut on the ball joint of the suction mount. Align the camera as desired and

screw the cap nut tight.

9. Connecting the power supply

When laying the vehicle charging cable, make sure that no safety-related equipment

(such as side air bags) is affected. The cable may not be laid within the activation

range of airbags and must not interfere with the driver.

• Connect the mini USB connector on the charging cable to the USB charging port (11).

• Extend the cable to the cigarette lighter and plug it in.

If the camera is not supplied with power, you may need to turn on the ignition. In some

vehicles, the cigarette lighter only works after switching on the ignition.

10. Charging the battery

• The camera switches on and the battery charges automatically when the camera is con-

nected to a power supply.

• The status indicator (6) turns red when the battery is charging. A full charge cycle takes ap-

proximately one hour.

• The status indicator (6) will turn off when the battery is fully charged.

• A fully-charged battery will last for approximately 20 minutes of video recording.

In some vehicles, the cigarette lighter is not switched on and off by the ignition. If this is

the case, the vehicle battery may be discharged. Disconnect the charging cable from

the cigarette lighter when you do not need to use the camera.

11. Inserting a memory card

The camera supports memory cards with a capacity of up to 32 GB.

If the device does not recognise your memory card, remove the memory card and

insert it again.

The memory card should be formatted before using the device (refer the menu instruc-

tions in this manual for details).

• Insert the memory card into the card slot (10).

• The memory card contacts must point towards the display (3).

• To remove the memory card, press the memory card inwards and then release it. The mem-

ory card will spring back and protrude out of the card slot (10), allowing you to remove it from

the camera.

12. Operation

Do not operate the camera when you are driving, as this may distract you and endan-

ger you and other road users.

a) General functions

Switching on and off

• Press the button (1) briey to switch on the camera.

• Hold down the button (1) to switch off the camera.

The camera will switch on automatically and start to record video when it is connected

to a power supply via the USB charging port (12).

The camera switches off when it is disconnected from the power supply via the USB

charging port (12) (this depends on the settings in the menu).

Selecting the operating mode

Briey press the button “MODE” (2) to switch between modes. The camera mode is indicated by

the icon in the upper-left corner of the display (3).

• Video mode (video camera icon)

Video is recorded in sequences. The length of each sequence can be congured via

the menu.

If the memory card is full, the oldest recording will be overwritten.

If the built-in acceleration sensor is enabled and detects an impact, the current record-

ing will be write-protected and will not be deleted, even when the card is full.

You can also press the button (5) (SOS function) to write-protect the recording.

Write-protection ensures that important recordings are not lost.

• Photo mode (photo camera icon)

• Playback mode (lm strip icon)

Inhaltsverzeichnis

Andere Renkforce Dashcam Handbücher

Renkforce

Renkforce RF-DHC-600 Bedienungsanleitung

Beliebte Dashcam Handbücher anderer Marken

Cansonic

Cansonic UltraDuo Z2 Bedienungsanleitung

Gazer

Gazer F720 Bedienungsanleitung

HP f500g Bedienungsanleitung

Xblitz

Xblitz TANGO 4K Bedienungsanleitung

Rexing

Rexing M1 Bedienungsanleitung

Maka Technologies

Maka Technologies Marbella MXPro Bedienungsanleitung

NESA

NESA NRC-80DLM Montage- und Bedienungsanleitung

Kaiser Baas

Kaiser Baas R20 Bedienungsanleitung

Boyo

Boyo VTM43TC Bedienungsanleitung

Minolta

Minolta MNCD37 Bedienungsanleitung

Thinkware

Thinkware FA10 Bedienungsanleitung

Momento

Momento MD-5200 Bedienungsanleitung

BlackVue

BlackVue DR590X-1CH Bedienungsanleitung

HP F300 Bedienungsanleitung

CammSys

CammSys BlackSys BH-300 Bedienungsanleitung

Snooper

Snooper DVR-2HD Bedienungsanleitung

Lukas

Lukas Q900 Bedienungsanleitung

RVS

RVS 450C Bedienungsanleitung