REPLIGEN KrosFlo ACSS-60K Bedienungsanleitung

420-14871-002 Rev. 00

KrosFlo® TFF System - Auxiliary Scale

Model ACSS-60K

User Guide

For use with:

•KrosFlo® KR2i Tangential Flow Filtration (TFF) System

•KrosFlo® KMPi Tangential Flow Filtration (TFF) System

User Guide

KrosFlo® TFF System – Auxiliary Scale ACSS-60K

User Guide

420-14871-002 Rev. 00

The information contained in this document is subject to change without notice.

Repligen Corporation makes no warranty of any kind with regards to this material, including, but not

limited to, the implied warranties of merchantability and fitness for a particular purpose.

Repligen Corporation shall not be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance, or use of this material.

No part of this document may be photocopied, reproduced, or translated to another language

without the prior written consent of Repligen Corporation.

Products are not intended for diagnostic or therapeutic use or for use in vivo with humans or

animals.

For further information, please contact Repligen Corporation at www.repligen.com.

of Repligen Corporation and/or its affiliate(s) or their respective owners.

Customer Support

customerserv[email protected]om

310-885-4600

Repligen Corporation

18617 South Broadwick Street

Rancho Dominguez, California 90220

www.repligen.com

KrosFlo® TFF System – Auxiliary Scale ACSS-60K

User Guide

420-14871-002 Rev. 00

Contents

2.1 System assembly.....................................................................................................................8

2.2 Operating instructions..........................................................................................................10

2.2.1 Operational panel .......................................................................................................10

2.2.2 Operating the auxiliary scale ......................................................................................10

3.1 Good weighing practice........................................................................................................12

3.2 Zeroing..................................................................................................................................12

3.3 Taring ....................................................................................................................................12

3.3.1 Entering tare value manually......................................................................................13

3.4 Units......................................................................................................................................13

3.4.1 Start unit .....................................................................................................................13

3.4.2 Temporary unit ...........................................................................................................13

4.1 External calibration...............................................................................................................14

4.2 User calibration ....................................................................................................................14

4.3 Calibration report .................................................................................................................14

5.1 Filter......................................................................................................................................14

5.2 Value release ........................................................................................................................15

5.3 Ambient conditions ..............................................................................................................15

5.4 Autozero function.................................................................................................................15

5.5 Tare entering mode ..............................................................................................................15

5.6 Tare value memory...............................................................................................................16

5.6.1 Entering tare value to scale memory..........................................................................16

5.6.2 Selecting tare value from the scale memory..............................................................16

5.7 Last digit................................................................................................................................16

6.1 RS232 (1) port settings .........................................................................................................17

7.1 Computer..............................................................................................................................17

7.1.1 Port .............................................................................................................................17

7.1.2 Continuous transmission ............................................................................................17

7.1.3 Printout interval for continuous transmission............................................................18

7.1.4 Printer .........................................................................................................................18

7.1.5 Port .............................................................................................................................18

7.2 Additional display .................................................................................................................18

7.2.1 Port .............................................................................................................................18

8.1 Calibration report .................................................................................................................18

8.2 GLP printout..........................................................................................................................19

9.1 Backlight ...............................................................................................................................20

9.2 ‘Beep’ sound .........................................................................................................................20

9.3 Automatic shutdown ............................................................................................................20

9.4 Date and time .......................................................................................................................20

9.5 Default user settings.............................................................................................................21

11.1 Running working mode.........................................................................................................22

11.2 Working mode local settings ................................................................................................22

11.2.1 Working mode accessibility ........................................................................................22

KrosFlo® TFF System – Auxiliary Scale ACSS-60K

User Guide

420-14871-002 Rev. 00

11.2.2 Save mode...................................................................................................................22

11.2.3 Automatic printout interval........................................................................................23

11.2.4 Lo threshold ................................................................................................................23

12.1 Local settings ........................................................................................................................23

13.1 Local settings ........................................................................................................................24

13.1.1 Working mode selection.............................................................................................24

13.2 Setting reference sample mass by entering mass of a single part .......................................24

13.3 Setting reference sample mass by determining mass of a single part.................................24

14.1 Local settings ........................................................................................................................25

14.2 Declaring checkweighing thresholds ....................................................................................25

15.1 Local settings ........................................................................................................................26

15.1.1 Working mode selection.............................................................................................26

15.2 Reference mass determined by weighing ............................................................................26

15.3 Reference sample mass by determining mass of a single part ............................................26

16.1 Local settings ........................................................................................................................27

16.2 Peak Hold operation .............................................................................................................27

17.1 Local settings ........................................................................................................................27

17.2 Totalizing operation..............................................................................................................28

18.1 Local settings ........................................................................................................................29

18.2 Animal Weighing operation..................................................................................................29

19.1 Cleaning ABS components....................................................................................................29

19.2 Cleaning stainless steel components....................................................................................30

19.3 Cleaning aluminum components..........................................................................................30

20.1 Dimensions ...........................................................................................................................31

20.2 Connectors arrangement......................................................................................................31

KrosFlo® TFF System – Auxiliary Scale ACSS-60K

User Guide

420-14871-002 Rev. 00

List of tables

Table 1. Auxiliary scale parts ..............................................................................................................7

Table 2. Auxiliary scale keys .............................................................................................................10

Table 3. Auxiliary scale menu ...........................................................................................................10

Table 4. Auxiliary scale menu navigation .........................................................................................11

Table 5. Good weighing practices ....................................................................................................12

Table 6. Calibration report variable list............................................................................................19

Table 7. GLP weighing printout variable list.....................................................................................19

Table 8. GLP date and time printout variable list.............................................................................21

Table 9. Scale Data ...........................................................................................................................21

Table 10. Working mode settings ......................................................................................................22

Table 11. Save mode options .............................................................................................................23

Table 12. Weighing – Local settings ...................................................................................................23

Table 13. Parts Counting – Local settings...........................................................................................24

Table 14. +/- control – Local settings .................................................................................................25

Table 15. Percent Weighing – Local settings......................................................................................26

Table 16. Peak Hold – Local settings ..................................................................................................27

Table 17. Totalizing – Local settings...................................................................................................28

Table 18. Animal Weighing – Local settings.......................................................................................29

Table 19. Troubleshooting suggestions..............................................................................................32

Table 20. Error messages ...................................................................................................................32

List of figures

Figure 1. KrosFlo® TFF - Auxiliary Scale components .........................................................................7

Figure 2. Auxiliary scale parts.............................................................................................................7

Figure 3. Packaging removal...............................................................................................................8

Figure 4. Transport lock removal........................................................................................................8

Figure 5. Leveling the scale ................................................................................................................8

Figure 6. Replace weighing pan

..........................................................................................................9

Figure 7. Interface cable to scale connection.....................................................................................9

Figure 8. Interface cable to octopus cable .........................................................................................9

Figure 9. Auxiliary scale keypad .......................................................................................................10

Figure 10. Calibration report example ...............................................................................................19

Figure 11. GLP printout example........................................................................................................20

Figure 12. Totalizing printout example ..............................................................................................28

Figure 13. Scale dimensions ...............................................................................................................31

Figure 14. Scale connectors................................................................................................................31

Figure 15. RS-232 connector ..............................................................................................................31

KrosFlo® TFF System – Auxiliary Scale ACSS-60K

User Guide

420-14871-002 Rev. 00

Abbreviations

Acc Access

CAL Calibration

CdF Calibration difference

Conn Communication

CtP Calibration type

dSh Dashed

dAt Date

ducE Peripheral devices

Err Error

Func Function

InFo Information

Int Interval

Lo Low

Othr Other

Prnt Printouts

rEAd Readout

SiG Signature

tin Time

KrosFlo® TFF System – Auxiliary Scale ACSS-60K

User Guide

repligen.com 420-14871-002 Rev. 00

KrosFlo® TFF System – Auxiliary Scale

The KrosFlo® TFF System – Auxiliary Scale assembly and operation may vary based on application.

The instructions below are for general use. For questions about specific application set up or

customization, please contact your local Repligen representative.

Figure 1. KrosFlo® TFF - Auxiliary Scale components

1. Display and operations keypad

2. Weighing pan

1. General precautions

•Remove the contents from the packaging. If a part is missing, contact Repligen for

replacement

•Prior to the first use, carefully read this User Guide. Use the device only as intended

•Scales to be decommissioned must be decommissioned in accordance with valid legal

regulations

2. KrosFlo® TFF System - Auxiliary Scale

Table 1. Auxiliary scale parts

Part description Quantity

ACSS-60K scale

6’ Interface cable

Figure 2. Auxiliary scale parts

1. ACSS-60K scale

2. 6’ Interface cable

1. Place the balance on a solid surface to ensure stability. Operate the balance in a room where

the temperature ranges between 10 - 40o C (50 - 104o F).

2. The balance must be positioned away from heat sources, magnetic fields, vibrations, and air

drafts to receive stable and repeatable results. Balance is to not to be used for explosive

materials.

KrosFlo® TFF System – Auxiliary Scale ACSS-60K

User Guide

repligen.com 420-14871-002 Rev. 00

2.1 System assembly

1. Remove unit from packaging.

Figure 3. Packaging removal

2. Remove unit transport locks. Once removed replace the weighing pan.

Figure 4. Transport lock removal

1. Level the scale by turning the feet and monitoring the leveling vial. Continue to adjust the

feet until the air bubble takes the central position.

Figure 5. Leveling the scale

2. Replace weighing pan.

KrosFlo® TFF System – Auxiliary Scale ACSS-60K

User Guide

repligen.com 420-14871-002 Rev. 00

Figure 6. Replace weighing pan

3. Prior to switching the balance on, let it reach room temperature (estimated stabilization

time: 1 - 8 hours).

4. Connect the adapter cable (DB9-M) to the rear of the scale. During this process there should

be no load on the weighing pan.

Figure 7. Interface cable to scale connection

5. Connect the adapter cable (DB9-F) to the auxiliary component octopus cable.

Figure 8. Interface cable to octopus cable

KrosFlo® TFF System – Auxiliary Scale ACSS-60K

User Guide

repligen.com 420-14871-002 Rev. 00

2.2 Operating instructions

2.2.1 Operational panel

Figure 9. Auxiliary scale keypad

Table 2. Auxiliary scale keys

Key Function

Press to switch the weighing device on/off – hold the key for about 1 second

Function key, press to change the working mode

Press to send the weighing result to a printer or a computer

Press to zero the scale

Press to tare the scale

2.2.2 Operating the auxiliary scale

Table 3. Auxiliary scale menu

Function group number Function group name Description

CAL

User calibration

rEAd

Readout parameters

Func

Working modes

Conn

Communication

ducE

Peripheral devices

Prnt

Printouts

Othr

Operation-related functions

InFo

Scale information

Unit

Units

In order to navigate the auxiliary scales menu, utilize the keypad.

Inhaltsverzeichnis

Andere REPLIGEN Skala Handbücher

REPLIGEN

REPLIGEN KrosFlo TFF Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung