ReSound Dot DT3060 Open Bedienungsanleitung

User Guide

dot by ReSound

Congratulations on the purchase of your new fully digi-

tal ReSound hearing instrument!

ReSound’s state-of-the-art technology and the

customized set-up selected by your hearing healthcare

professional will bring outstanding sound quality to your

family, social and professional life.

Your dot by ReSound hearing instrument has been ad-

justed to your individual hearing loss. Please familiarize

yourself with the information in this booklet. Proper

understanding and use of your new ReSound hearing

instrument will allow you to derive maximum hearing

beneﬁt.

This booklet & your instrument

In this booklet you will ﬁnd instructions for inserting and

removing your new hearing instrument. You will ﬁnd

explanations on controlling your instrument, on daily

handling and on its use. Furthermore, you can read what

to do if things do not live up to your expectations. We

will give a few practical steps towards better hearing.

dot™ by ReSound is a registered trademark of ReSound.

Contents

Your Hearing Instrument .......................4

On/Off Function..............................6

SmartStart ..................................7

Inserting and removing the device .............. 8-9

Changing the Battery.........................10

Battery Warning Information ...................11

Daily Maintenance ...........................12

The Receiver Tube ........................ 13-20

Cleaning the Receiver Tube and the Receiver Domes .13

The Receiver Domes..........................15

Double Wax Guard Filter ......................18

Telephone Use ..............................22

Repairs....................................22

General Precautions ..........................23

Technical Data ..............................24

Troubleshooting Guide..................... 26-27

Key Word Index .............................28

The model of dot that you have been ﬁtting with ...29

6. Model

7. Battery size

8. Serial number

9. NP receiver tube

10. HP receiver tube

Your ReSound Hearing Instrument

1. Receiver tube

2a. Reciever Open Dome

2b. Receiver Tulip-Dome

2c. Power Dome

2d. RIE Mold

3. Sports Lock

4. Battery Compartment

5. Receiver

109

On/Off Function

Your hearing aid

is equipped with an

on/off switch integrated

into the battery

compartment. When

the battery compartment

is fully closed, the instrument is turned on.

To turn the instrument off, grasp the battery com-

partment door with your ﬁngernail and gently pull

downwards. The power will switch off at the point

where you can feel a small click. Whenever you are

not wearing the instrument, remember to turn it off to

reduce battery consumption.

SmartStart

Your hearing care professional

may have activated the SmartStart

function in your hearing instrument.

The SmartStart delays the switch-on

time 10 seconds after closing the

battery compartment. This is indicated

by beeps at one second intervals after

closing the battery compartment, which means that you

could hear 10 beeps before the hearing aid is activated.

If you wish, it can be inactivated by your hearing care

professional.

Removing:

1. Grasp the receiver tube where

it bends and pull the receiver

dome out of your ear canal.

2. Lift the hearing instrument

of your ear.

Removing (when using a RIE Mold):

1. Grasp the pull-out cord on the

RIE Mold and pull the RIE Mold

out of your ear canal.

2. Lift the hearing instrument

of your ear.

Inserting and removing the device

Inserting:

1. Hang the instrument over the top of

the ear.

2. Grasp the receiver tube where it bends and push the

receiver dome into your ear canal. The

receiver dome should be placed far

enough into the ear so that the

receiver tube lies ﬂush with your

head. When the receiver dome is

placed appropriately, you should not see the receiver

tube sticking out when you look directly into a mirror.

3. If the hearing care professional has provided

you with a sport lock on the receiver tube,

make sure to position it into the indenta-

tion above the earlobe. If the device

whistles, the most likely reason is that the

receiver dome is not placed correctly in the

ear canal.

Other reasons can be build-up of earwax

in the ear canal. It is also possible that the

instrument settings are not optimal. To help

you solve these issues it is recommended to

contact your hearing care professional.

Changing the Battery

When the battery voltage/power decreases

to a certain level, the instrument will stop

amplifying and emit soft beeping

signals. This signal will continue

for about one minute and the

sequence will continue

every ﬁve minutes

until the instrument

will be automatically

switched off.

Please make sure you have the correct size battery. It

will be labeled on the battery or on the battery pack-

age. This hearing instrument requires a size 10A. This is

a Standard Zinc Air battery.

If you forget the battery size

your hearing instrument uses you

will ﬁnd it labeled on the ﬂat side of

the hearing instrument. Please open the

battery compartment completely, without

using force, by using your ﬁngernail.

After removing the old battery, insert the new one.

The battery should be inserted in the battery compart-

ment with the ﬂat side, which is the side with the sticker

on, facing up. The battery should ﬁt in like a puzzle

piece. Be sure to remove the sticker before closing the

battery compartment door. The battery compartment

door should close very easily. Never use force to close

the door as this may damage your hearing instrument.

Please remove the battery when you are not wearing

the instrument. This will help preventing corrosion on

the battery contacts.

Battery Warning Information

Batteries contain dangerous substances and should be

disposed of carefully in the interest of your safety and

for the environment.

• DoNOTattempttorechargestandardbatteries(Zinc-

Air). They may leak or explode.

• DoNOTattempttodisposeofbatteriesby burning

them.

• Keepbatteriesawayfromsmallchildrenandpets.

• DoNOTplacebatteriesinyourmouth.Ifswallowed,

see a physician immediately.

The Receiver Tube

TheReceiverTubecomesintwodifferenttypes;NP(Nor-

malPower)andHP(HighPower).

Please see illustrations.

Depending on your hearing loss

you have either been ﬁtted with

the NP or the HP receiver type.

Please see page 29 to see your

selected type. The receiver tube contains the wiring to the

receiver which delivers the sound direct in the ear canal. It

is important that the receiver tube and the receiver dome/

RIE Mold ﬁt correctly into your ear. If the receiver tube or

the receiver dome/RIE Mold irritate your ear in any way and

prevent you from wearing your hearing instrument, please

contact your hearing care professional. You should never

attempt to modify the shape of the receiver tube yourself.

The receiver tube and the receiver dome/RIE Mold should

be cleaned regularly.

Please see instructions in the next section.

Cleaning the Receiver Tube and the Receiver Domes

The receiver tube and the receiver dome should be clea-

ned regularly. Use a damp cloth to clean the receiver tube

and receiver dome on the outside. Do not use water when

you are cleaning the receiver tubes or the receiver domes.

Please see instruction on page 19 or 20 for how to

change the HF3 wax guard ﬁlter.

Daily Maintenance

Keep your hearing instrument clean and dry. Wipe the

case with a soft cloth or tissue after use to remove gre-

ase or moisture. You should avoid exposing your instru-

ment directly to moisture such as rain or water from the

shower. If your instrument does get wet or if it has been

exposed to high humidity or perspiration, it should be

left to dry out overnight with the battery out and the

battery compartment open. It is also a good idea to put

them in a sealed container together with a drying agent

(dessicator)overnight.Consultyourhearingcareprofes-

sional as to which drying agent to use.

To avoid the need for unwarranted repairs:

• Never immerse the instrument in water or other li-

quids since this may cause permanent damage to the

circuitry.

• Protect your hearing instrument from rough hand-

ling, and avoid dropping it on hard surfaces or ﬂo-

ors.

• Donotleavetheinstrumentinorneardirectheator

sunlight since excessive heat can damage the instru-

ment or deform the casing or the receiver tube.

NP HP

Cleaning the RIE Mold

We recommend that you use a damp cloth to clean the RIE

mold after every time you use it. It’s important to keep it

clean from wax so that you will not have wax or bacteria

building up on the mold.

If you no longer can clean the RIE Mold using a damp cloth

we recommend you to contact your hearing care profes-

sional for them to clean it, using water and soap. If your

hearing care professional has instructed you to clean it your-

self this way, please follow the instructions below.

1 2 3 4 5 6

78910 11 12

13 14 15 16 17 18

The Receiver Domes

The Receiver Air Dome / Receiver Tulip Dome / Receiver

Power Dome should be changed every third month or

sooner if needed. We recommend that you have your

hearing care professional change the Receiver Air Dome

/ Receiver Tulip Dome / Receiver Power Dome for you. If

your hearing care professional instructs you to change

the Receiver domes yourself, make sure that they are

securely fastened to the receiver tube before inserting

them in your ear. A failure to change the domes in

accordance with the instructions could result in injury.

If you have been ﬁtted with a Receiver Power Dome we

strongly recommend that your hearing care professional

change the dome since this needs to be done with a

tool.

How to mount the Receiver Air Dome

The Receiver Air Dome is mounted by pushing it gently

over the receiver at the end of the receiver tube.

How to mount the Receiver Tulip Dome

(1)+(2)TheReceiverTulip

Dome is mounted by gently

pushing it over the receiver at

the end of the receiver tube.

The Receiver Tulip Dome

should be directed with the sound

outlet hole facing either down

towards your shoulders or up

towardsyourhair.(3)

The sound outlet hole can turn

both ways; the direction of the

sound outlet hole affects the length

of the sound tube according to the

entrance of your ear canal.

Please ask your hearing care

professional which way the sound

outlet hole should turn in your ear.

The Receiver Tulip Dome consists of two “leaves” and

it is important that the largest “leaf” is the outermost

“leaf”(4).

This can easily be done by pushing the “leaves” away

from the receiver tube with your foreﬁnger and middle

nger(5).Thiswillmakethelarge“leaf”bendforward.

Then you push it back and it will be placed on top of the

smaller“leaf”(6).NowtheReceiverTulipDomeisready

forinsertion(7).

We recommend that your hearing care professional

change them for you. If your hearing care professional

has instructed you to change them yourself, please fol-

low the instructions below.

Changing wax guard for NP Receiver Tube

Changing wax guard for HP Receiver Tube

Power Dome:

Please contact your hearing care professional for them

to change the wax guard in the power dome for you.

12345

109876

How to mount the Receiver Power Dome

We strongly recommend that you always turn to your

hearing care professional when the power domes needs

to be changed, since it can only be mounted the correct

way with a tool. If mounted incorrectly there is a risk

that the dome will come of and stay in your ear canal.

We advise you to have them changed when the domes is

turning yellow in color, get’s damaged or can no longer

be cleaned with a damp cloth.

Double Wax Guard Filter

Your hearing instrument has two types of wax guard ﬁl-

ters to increase the protection against wax and moister

to damage the hearing instrument.

The ﬁrst wax guard ﬁlter is in-moulded in the Receiver

domes. This will act as the front protection.

The second wax guard ﬁlter is placed at the front of the

receiver or inside the dome if the hearing care profes-

sionalhasttedyouwithaHighPowerReceiver(please

see illustration of the receiver type on page 5). The type

is called HF3. They come in both red and blue. This will

indicate on what ear the hearing instrument is sitting.

Red for right and blue for left.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ReSound Hörgerät Handbücher

ReSound

ReSound Ziga Mini BTE ZG60-DI Bedienungsanleitung

ReSound

ReSound OMNIA RU9ITC-DWC-LP Bedienungsanleitung

ReSound

ReSound LiNX2 IIC Bedienungsanleitung

ReSound

ReSound Vea Montageanleitung

ReSound

ReSound be 9 Bedienungsanleitung

ReSound

ReSound LiNX 3D 88 Bedienungsanleitung

ReSound

ReSound ONE Service-Handbuch

ReSound

ReSound SY312 Bedienungsanleitung

ReSound

ReSound BTE Bedienungsanleitung

ReSound

ReSound LiNX 3D BE60 Bedienungsanleitung

ReSound

ReSound Danalogic Ambio BTE Bedienungsanleitung

ReSound

ReSound sparx Bedienungsanleitung

ReSound

ReSound SO862-DRW Bedienungsanleitung

ReSound

ReSound ONE 61 RIE Bedienungsanleitung

ReSound

ReSound Aventa 3 Bedienungsanleitung

ReSound

ReSound LINX 3D Montageanleitung

ReSound

ReSound x-Plore XE30 Bedienungsanleitung

ReSound

ReSound Linx Quattro Bedienungsanleitung

ReSound

ReSound V 70 Bedienungsanleitung

ReSound

ReSound LiNX3D 67 Bedienungsanleitung

ReSound

ReSound Standard Tube Bedienungsanleitung

ReSound

ReSound Azure Silhouette BTE AZ71-DVI Bedienungsanleitung

ReSound

ReSound SY312 Bedienungsanleitung

ReSound

ReSound BTe ZG71-dVi Bedienungsanleitung

Beliebte Hörgerät Handbücher anderer Marken

Sonic

Sonic Bliss miniBTE Bedienungsanleitung

Lexie

Lexie B1 Stücklistenhandbuch

Widex

Widex FM+DEX Bedienungsanleitung

Siemens

Siemens Triano Bedienungsanleitung

Camplicomms

Camplicomms HC-200 Bedienungsanleitung

Widex

Widex SUPER 220 S2-VSD Bedienungsanleitung

Phonak

Phonak Q90 Bedienungsanleitung

Williams Sound

Williams Sound SoundPlus WIR 237 Leitfaden

Oticon Medical

Oticon Medical Ponto SoundConnector Bedienungsanleitung

Siemens

Siemens Life micon Bedienungsanleitung

Starkey

Starkey Destiny Bedienungsanleitung

Audicus

Audicus The Icon Bedienungsanleitung

Advanced Bionics

Advanced Bionics Slim HP Standard Bedienungsanleitung

Widex

Widex DREAM440 THE DREAM SERIES Bedienungsanleitung

Phonak

Phonak myPilot Bedienungsanleitung

NIKEN

NIKEN NK-401 Bedienungsanleitung

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Bedienungsanleitung

Sonetik

Sonetik GOHEAR Bedienungsanleitung

ReSound dot DT3060 Open Bedienungsanleitung

Beliebte Hörgerät Handbücher anderer Marken