ReSound ENZO 2 Montageanleitung

resoundpro.com

ReSound Aventa®3 .10

ﬁtting guide

SMART HEARING™

2 3

The hearing instruments will appear in the “Select Instruments”

section. When all hearing instruments to be programmed have been

discovered, click on “Beep” to identify each hearing instrument, and

assign it as a right or left device. When each hearing instrument has

been assigned, click “Continue”.

Getting started

Prior to connecting to ReSound Aventa 3:

1. ReSound devices require a battery when ﬁtting. Make sure the

battery is fresh and that it is inserted correctly.

a. For wireless ﬁttings, insert AirlinkTM/Airlink II in a USB slot on

the ﬁtting PC and wait for the message that new hardware

has been found. Then open ReSound Aventa 3.

b. For wired ﬁttings, ensure that the programming interface

(Speedlink, Hi-PRO or NOAHlink) is connected to the PC

before launching ReSound Aventa 3.

2. Launch ReSound Aventa 3. For new ﬁttings, ReSound Aventa 3

begins in the Start screen, where the patient’s experience with

ampliﬁcation can be selected. Selection of ﬁtting interface and

connection to the hearing aids is done in the upper part of the

Start screen.

Remove the stickers from the size 675 batteries to activate them.

Wait for one minute for best results. Click “Connect” in the center of

the top ribbon of the ReSound Aventa 3 Start screen.

Insert the battery and close the battery door of each hearing

instrument to be programmed, and then click “Connect.”

Choose patient’s

experience level Click “Connect”

Play a beep to

determine right

from left hearing

instrument

Assign hearing

instrument to right

or left ear

This ﬁtting guide gives an overview of how to ﬁt

ReSound ENZO2TM wireless hearing instruments with

ReSound Aventa®3.10. A ReSound ENZO2998 wireless

binaural ﬁtting is depicted.

ReSound Aventa 3.10 ﬁtting software supports all

ReSound instruments built on the ReSound RangeTM,

ReSound Range II and SmartRangeTM chips.

4 5

At this point, you may pair ReSound wireless accessories by

clicking “Accessories”, or proceed to the ﬁtting by clicking

“Continue”. In this guide, “Continue” is selected.

Next, a window will appear to prompt calibrating DFS UltraTM II.

Click “Calibrate” to begin the calibration procedure. The progress of

the calibration will be shown. Click “Continue” after calibration is

completed.

A window will appear showing the status of the connection, and will

alert you to recommendations for venting. Choose to either keep

the “Current” conﬁguration or the “Recommended” conﬁguration.

Click “Continue.”

If you have selected “Experienced linear” in the Pre-Fit screen, you

will be prompted to choose an ampliﬁcation mode. Linear mode

provides the same gain for all input levels and has only one input

level control. Semi linear provides a lower compression ratio than

WDRC.

A progress window will alert you to the capability of the hearing

instrument to exceed 132 dB SPL. Click “Continue.”

6 7

ReSound Aventa®3.10 includes three input level controls at 50,

65 and 80 dB SPL. This allows for greater ﬂexibility for ﬁne-tuning

gains. ReSound Aventa®calculates the gain settings for the

particular audiogram using the Audiogram+ ﬁtting rationale. To

ﬁne-tune a program, adjust the gain manually by using the gain

handles or by using the ReSound Aventa®Guide, where ﬁne-tuning

solutions to patient complaints can be automatically applied.

Once ﬁne-tuning is complete, the relative gain changes can be

applied to any or all other programs by clicking the “Autorelate”

button in the program handling tool bar beneath the program tabs.

Select which programs to autorelate to by checking the boxes. You

may choose whether to apply changes made to MPO or Sound

Shaper or compression mode for each program.

Gain adjustment

When the Fit screen is displayed, the hearing instrument gains

and MPOs can be adjusted, and feature settings are accessed by

clicking “Advanced Features” in the “Tools” menu on the left side of

the screen.

Fine-tune and Save hearing instruments settings

Saving and completing the ﬁtting

Once the ﬁtting is complete, click “Save” at the bottom right

of the Fit or Summary screens. Once the data is saved to the

instruments and to the database, it is safe to disconnect the hearing

instrument(s).

Summary screen

The Summary screen allows the clinician to print information for

the patient, a third party, or for chart notes. Notes can be entered,

saved and printed as needed.

M 2 01 317- G B -15 .11- R e v. A

are trademarks of Apple Inc., registered in the U.S. and other countries. Bluetooth is a trademark of Bluetooth SIG, Inc.

ReSound helps people rediscover hearing with hearing solutions that emulate the function of the natural ear. Our aim is to help you give your clients the

opportunity to live a rich, active and fulﬁlling life.

ReSound ENZO2is the next step in Smart Hearing for super power users. It streams stereo sound from iPhone, iPad and iPod touch without an

intermediate device, and with the ReSound Smart™app it offers smart new ways to control and personalize the hearing experience with a touch on the

iPhone or Apple Watch.

resoundpro.com/enzo2

WORLDWIDE HEADQUARTERS

GN ReSound A/S

Lautrupbjerg 7

DK-2750 Ballerup, Denmark

Tel.: +45 45 75 11 11

resound.com

UNITED KINGDOM

GN ReSound Ltd.

Kirtlington Business Centre

Portway

Kirtlington

Oxon OX5 3JA

Tel.: +44 1869 352 800

gnresound.co.uk

NEW ZEALAND

GN ReSound (NZ) Ltd.

Ground Floor, North Entrance

4 Fred Thomas Drive

Takapuna

Auckland, 0622

Tel.: (free) 0800 900 126

gnresound.co.nz

AUSTRALIA

GN ReSound Pty. Ltd.

Gate C, 19-25 Khartoum Rd

Macquarie Technology Park

Macquarie Park NSW 2113

Tel.: (free) 1800 658 955

gnresound.com.au

Andere ReSound Hörgerät Handbücher

ReSound

ReSound Mini BTE AZ60-di Mini BTE AZ60-Vi Bedienungsanleitung

ReSound

ReSound Ziga Lite ZL-61 Bedienungsanleitung

ReSound

ReSound LINX 3D Bedienungsanleitung

ReSound

ReSound Custom Bedienungsanleitung

ReSound

ReSound VE10 Bedienungsanleitung

ReSound

ReSound ENZO QUATTRO Series Bedienungsanleitung

ReSound

ReSound Ziga ZG30 Bedienungsanleitung

ReSound

ReSound MIH-S Bedienungsanleitung

ReSound

ReSound PS60-R Bedienungsanleitung

ReSound

ReSound LiNX 3D 77 Bedienungsanleitung

ReSound

ReSound BE70 Bedienungsanleitung

ReSound

ReSound LiNX 3D MIH Bedienungsanleitung

ReSound

ReSound Danalogic Ambio BTE Bedienungsanleitung

ReSound

ReSound Match Series Bedienungsanleitung

ReSound

ReSound Alera TS Bedienungsanleitung

ReSound

ReSound Vea Bedienungsanleitung

ReSound

ReSound Enya 67 Bedienungsanleitung

ReSound

ReSound LiNX Quattro 61 Bedienungsanleitung

ReSound

ReSound 60 series Bedienungsanleitung

ReSound

ReSound Enya ITC Bedienungsanleitung

ReSound

ReSound ONE Bedienungsanleitung

ReSound

ReSound LiNX Quattro MIH Bedienungsanleitung

ReSound

ReSound BTe ZG71-dVi Bedienungsanleitung

ReSound

ReSound Magna Bedienungsanleitung

Beliebte Hörgerät Handbücher anderer Marken

Sonic

Sonic Bliss miniBTE Bedienungsanleitung

Lexie

Lexie B1 Stücklistenhandbuch

Widex

Widex FM+DEX Bedienungsanleitung

Siemens

Siemens Triano Bedienungsanleitung

Camplicomms

Camplicomms HC-200 Bedienungsanleitung

Widex

Widex SUPER 220 S2-VSD Bedienungsanleitung

Phonak

Phonak Q90 Bedienungsanleitung

Williams Sound

Williams Sound SoundPlus WIR 237 Leitfaden

Oticon Medical

Oticon Medical Ponto SoundConnector Bedienungsanleitung

Siemens

Siemens Life micon Bedienungsanleitung

Starkey

Starkey Destiny Bedienungsanleitung

Audicus

Audicus The Icon Bedienungsanleitung

Advanced Bionics

Advanced Bionics Slim HP Standard Bedienungsanleitung

Widex

Widex DREAM440 THE DREAM SERIES Bedienungsanleitung

Phonak

Phonak myPilot Bedienungsanleitung

NIKEN

NIKEN NK-401 Bedienungsanleitung

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Bedienungsanleitung

Sonetik

Sonetik GOHEAR Bedienungsanleitung