ReSound LiNX 3D ITC Bedienungsanleitung
Quick guide
ReSound LiNX 3D™
ITC/HS/FS
Product: ReSound LiNX 3D
Model: ITC/HS/FS
Serial number (R):
_______________________________
Serial number (L):
_______________________________
Battery size: 312, 13
My hearing aid information
Program button (A):
ACTION RESULT
SHORT
push Program change
LONG push Activate streaming
(if enabled by professional)
Volume control (C):
(if set up by your hearing care professional)
ACTION RESULT
Rotate forward
(toward your
face)
Volume increases
Rotate backward
(away from your
face)
Volume decreases
PROGRAM WHEN TO USE BEEPS
11
22
33
44
Programs:
(if set up by your hearing care professional)
View ReSound hearing aid tutorial videos at youtube.com/resoundus.
A. Program button*
B. Microphones
C. Wax guard
D. Sound outlet
E. Battery door
Get to know your hearing aid
C/D
B
A
E
F
GN ReSound
XXXXXXXXXX
I
H
F. Volume control*
G. Manufacturer
H. Model
I. Serial number
G
*If selected by your hearing care professional
LTxITC
Getting started: On/O function
ON: When the battery door (E) is
closed, the hearing instrument
turns on, and the default
program will be activated.
OFF: To turn o the hearing
instrument, open the battery
door (E). Many individuals can
use their fingernail to pull it
open.
ON
OFF
What you need to know Inserting/Replacing the battery:
1. Open the battery door (E)
completely
by using
your fingertip.
2. Remove protective sticker from
battery and wait 2 minutes before
inserting the
battery into the
hearing aid to
allow full activation of the battery.
3. Insert the new battery
with the positive side
(flat side) in the correct
position, as shown.
4. Gently close the battery door. If it
doesn’t close easily, check to see
if the battery is upside down.
Insertion: To insert the new wax
guard (C), gently press the replace-
ment side of the wax guard tool
straight into the hole of the sound
outlet until the outer ring lies flush
with the outside of the receiver. Pull
the tool straight out. The new wax
guard will remain in place.
For changing HF3 wax guard (C),
complete the following steps:
1. Brush the sound
outlet area with the
sound outlet
pointed down.
2. Insert the threaded end of the wax
guard tool into the used wax guard
(C), and rotate clockwise.
3. Gently pull until
the used guard
is removed.
removal side replacement side
Wax guard tool
Daily: Clean your hearing aid.
Keep your hearing aids dry. Clean
the hearing aids using a soft cloth
or tissue.
Monthly: Change the wax guard (C)
or see your hearing care professional.
For changing CeruSTOP™(white) wax
guard, complete the following steps:
Removal: Insert the removal side of
the wax guard tool into the used wax
guard (C) so that the shaft of the tool
is touching the rim of the wax guard.
Slowly pull the wax guard straight out.
Regular care & maintenance
Flight mode:
Some airlines prohibit the use
of wireless hearing aids (RF
transmitters) onboard. If required
by your airline, enable flight mode:
Disable wireless operation by
opening and closing the battery
compartment three times within
ten seconds (open-close, open-close,
open-close). Your instruments will
now be in flight mode.
The hearing aids must function in
flight mode for 10 seconds before
wireless operation can be re-enabled.
To re-enable wireless operation,
open and close the battery door one
time and wait thirty seconds before
opening the battery door again to
avoid accidentally entering flight
mode again.
4. Discard
the used
guard in
the slot
located
in the wax guard kit by pressing it
into the center, sliding it to one end
of the slot, and pull until the filter is
discarded.
5. Flip the wax guard
tool around, locate a
new guard in the dial,
and press the tip of
the tool into the
center of the dial.
6. Gently pull the new
guard out of the dial.
7. Press the new guard to the canal tip
of the hearing aid. Move the tool
gently side to side and pull it away
from the hearing aid.
Beep/tone indicators
View ReSound hearing aid tutorial videos at youtube.com/resoundus.
BEEP/TONE INDICATION ACTION REQUIRED
Ding, ding, ding, dong Low battery Change battery
Ding (5 or 10) Hearing aid is starting up After dings cease,
hearing aid is turned on
Ding-ding,
ding-ding, etc.
Hearing aid is in flight mode Use in flight mode if
desired, or open-close
battery door (E) to exit
flight mode
Ripple tone Hearing aid is in
streaming mode
Use with wireless
accessory or press multi-
function button to exit
streaming mode
SYMPTOM CAUSE POSSIBLE REMEDY
No sound Battery door (E) not closed
Dead battery
Battery door (E) will
not close
Blocked wax guard (C)
Turn on by closing the battery door (E)
Replace battery
Insert battery properly
Replace wax guard (C) or consult your
hearing care professional
Not loud
enough
Blocked sound outlet (D)
Change in hearing,
volume too low
Excessive ear wax
Change wax guard (C) or consult your
hearing professional
Consult your hearing care professional
Consult your hearing care professional
Excessive
whistling/
feedback
Incorrect placement in ear
Excessive ear wax
If none of the above
Re-insert hearing aid carefully
Clean guard (C)/consult your hearing
care professional
Consult your hearing care
professional
Troubleshooting
If there are any other problems not mentioned in this guide, please contact
ReSound or your hearing care professional.
Refer to the user guide included in
your hearing aid box.
Your hearing care professional can
be reached at:
View ReSound hearing aid tutorial
videos at youtube.com/resoundus.
400704011 Rev A 2017.02
ReSound Government Services
8001 E. Bloomington Freeway
Bloomington, MN 55420
1.800.392.9932
www.resound.com/veterans
Manufacturer according
to FDA:
ReSound North America
8001 E. Bloomington Freeway
Bloomington, MN 55420
1.888.735.4327
resound.com
Manufacturer according
to Health Canada:
ReSound Canada
303 Supertest Road
Toronto, Ontario M3J 2M4
1.888.737.6863
resound.com
For more information
Dieses Handbuch passt für folgende Modelle
2
Andere ReSound Hörgerät Handbücher
ReSound
ReSound Linx Quattro Bedienungsanleitung
ReSound
ReSound Ziga BTE ZG80-VI Bedienungsanleitung
ReSound
ReSound ENZO2 88 Bedienungsanleitung
ReSound
ReSound ENZO 2 Montageanleitung
ReSound
ReSound sparx Bedienungsanleitung
ReSound
ReSound LX800-M Bedienungsanleitung
ReSound
ReSound Enya ITC Bedienungsanleitung
ReSound
ReSound Ziga ZG30 Bedienungsanleitung
ReSound
ReSound ONE Bedienungsanleitung
ReSound
ReSound TrimFlex Plus BTE Bedienungsanleitung
ReSound
ReSound M60 Bedienungsanleitung
ReSound
ReSound Standard Tube Bedienungsanleitung
ReSound
ReSound ESSENCE LITE Bedienungsanleitung
ReSound
ReSound LiNX2 IIC Bedienungsanleitung
ReSound
ReSound RS DELHI Bedienungsanleitung
ReSound
ReSound ONE Programmierhandbuch
ReSound
ReSound Vea Bedienungsanleitung
ReSound
ReSound XE10 Bedienungsanleitung
ReSound
ReSound LINX 3D 61 Bedienungsanleitung
ReSound
ReSound 3050M Bedienungsanleitung
Beliebte Hörgerät Handbücher anderer Marken
Advanced Bionics
Advanced Bionics Slim HP Standard Bedienungsanleitung
Widex
Widex DREAM440 THE DREAM SERIES Bedienungsanleitung
Phonak
Phonak myPilot Bedienungsanleitung
NIKEN
NIKEN NK-401 Bedienungsanleitung
ON Semiconductor
ON Semiconductor Ezairo 7111 Pre Suite Bedienungsanleitung
Sonetik
Sonetik GOHEAR Bedienungsanleitung