Response CWD3 Bedienungsanleitung

Digital Wireless Colour Camera

Recordable CCTV Kit CWD3

Installation and Operating Instructions

YOUR HELPLINE 0844 736 9149

www.friedland.co.uk

Lines open Monday to Friday 9.00am to 5.00pm. Calls charged at local rates.

These instructions should be retained in a safe place for future reference.

CONTENTS

1. INTRODUCTION—3

2. KIT CONTENTS—6

3. INSTALLATION—8

3.1 Contents and Connections 8

3.2 Powering up the system 9

3.3 Setting the Camera Channel (Optional) 10

3.4 Pairing the Camera to Receiver (Optional) 10

3.5 Camera Installation 11

4. MONITOR PANEL INTRODUCTION—12

5. SYSTEM INTRODUCTION—13

5.1 Icon Functions 13

5.2 System Menu 14

6. System Operation —16

6.1 Camera Setup 16

6.2 Recorder Setup 19

6.3 Event List 21

6.4 System Setup 23

6.5 Alarm Buzzer 26

6.6 Pan Tilt Zoom 27

6.7 Memory Card Overwrite 28

7.PC PLAYBACK SOFTWARE—29

7.1 Sec24 Media Player Introduction 29

7.2 Installation 30

7.3 Playback recorded le(s) 33

7.4 Channel Disable / Enable Select 35

8. System Conguration—36

9.Product Specication—37

10.Total Recording Time for Memory Cards (32GB max.)—37

11.Battery used in the 7" LCD monitor—37

1. INTRODUCTION

The Digital Wireless Colour Camera Recordable CCTV Kit is a wireless security system

designed to view and capture video clips of any motion viewed by the wireless camera

and store them in on a micro SD memory card. The wireless camera supplied is colour,

weatherproof and suitable for day/night use for the protection of your home or ofce, etc.

Please read before you start:

Always use discretion when installing CCTV survillance equipment especially

when there is perceived policy. Enquire regarding local regulations applicable

to the lawful installation of video recording/surveillance. Third party consent

may be required.

WIRELESS DEVICES OPERATING RANGE:

Ensure the signal reception viewed from the wireless camera is the best

possible reception (i.e. no interference lines viewed on the TV) between the

camera and receiver. If necessary reduce the distance between the camera

and receiver to improve overall system performance.

The Wireless Colour Camera Recordable CCTV Kit operating on a secure

digital 2.4GHz frequency can greatly reduce interference from products such

as wireless routers, cordless phones, microwave ovens, concrete walls, large

scale metal objects, and furniture.

YOUR HELPLINE 0844 736 9149

www.friedland.co.uk

If you have any problems installing this CCTV system please refer to the

Trouble Shooting sections on page 9 which should help solve any common

problems, or call the Customer Helpline, available Monday to Friday 9.00am

to 5.00pm.

Calls are charged at local rates. Network charges for mobiles may

vary depending on your network and call plan.

Camera 2

Camera 1

Front Door

cable hole

(to allow camera

cable and connector

to pass through)

Receiver

TV/Monitor

Ensure the distance from camera to power

outlet does not exceed the length of the

camera power adapter cable

PLANNING YOUR LAYOUT:

SAFETY AND INSTALLATION TIPS:

7" LCD DVR Receiver

• keep away from heat sources and high temperature places

• Avoid direct sunlight

• Avoid humid places

• Avoid vibration

• Install in a ventilated environment

• The supplied 2GB micro SD memory card can be replaced with up to a 32GB

capacity one if required.

• Do not use in wet conditions if operated on battery power

YOUR HELPLINE 0844 736 9149

www.friedland.co.uk

Lines open Monday to Friday 9.00am to 5.00pm. Calls charged at local rates.

NOTE:

The camera has an open eld RF operating range of up to 150m.

7" LCD DVR

20mm diameter

Camera(s) and DVR

NIGHT VISION:

Do not attempt to open the units with the power adaptor plug connected to avoid any risk

of personal injury.

When installing CCTV camera(s), always follow manufacturer's advice when using power

tools, steps, ladders, etc. and wear suitable protective equipment (e.g. safety goggles)

when drilling holes. Before drilling holes through walls check for hidden electricity cables

and water pipes. The use of cable/pipe detector is advisable.

It is also advisable to avoid exposing any cameras to extreme weather conditions (e.g,

under a gutter which is prone to any water leaks). When installing any cameras with this

unit, it is advisable to use cable conduit to protect any video/power extension cables

from being exposed externally and to prevent/reduce the chances of the cables being

tampered with. After drilling any hole though an external wall for a cable, ensure the hole

is sealed up around the cable using a sealant to prevent drafts.

To prevent a re or electrical shock hazard, do not attempt to open the housing while

the unit is exposed to rain, water or wet conditions. There are no user serviceable

parts inside. Refer servicing to qualified service personnel. Avoid pointing the

camera(s) directly at the sun or any bushes, tree branches or moving objects that might

unnecessary cause the DVR to record due to winds for example. The system also

provides "Masking" function, and the user may screen out motion detection area in parts

of the picture which motion detection is not required.

The camera has built-in infra-red LEDs to allow you to view at night for 24hrs

surveillance. The LEDs will automatically activate at night and the picture viewed will turn

to black and white. The night viewing range is up to 5-8m.

1 x 7" LCD Monitor (Receiver)

2 x Digital Wireless Cameras

3 x 5V/1A Power Adapter for Camera and Receiver

2 x Camera Stands

2 x Fixings Pack

1 x Video Playback PC Software(CD-ROM)

1 x AV Cable for TV Output

2 x Power Supply Adaptor Extension Cable for Cameras (1.8m)

2 x Camera Antennas

1 x 2 GB Micro SD Memory Card and adaptor

1 x Manual

1 x Window Sticker

2. KIT CONTENTS

YOUR HELPLINE

0844 736 9149

www.friedland.co.uk

Trouble Shooting page 9 or call the

Customer Helpline available Monday to

Friday 9.00 am to 5.00pm.

If any parts are missing contact your helpline 0844 7369149

Tools Required:

Memory card reader for a PC if using playback software (only if your PC has no built

in memory card reader) Safety Glasses Hammer Bradawl Electric drill

No. 2 Philips screwdriver 5mm masonry drill bit 20mm masonry drill bit

Digital Wireless Camera

5V/1A Power Adapter for

Camera and Receiver

Camera Stand

Power Supply Extension

Cable for Cameras (1.8m)

Fixings Pack Video Playback PC

Software (CD-ROM)

Window Sticker

AV Cable

Camera Antenna

Manual

YOUR HELPLINE 0844 736 9149

www.friedland.co.uk

Lines open Monday to Friday 9.00am to 5.00pm. Calls charged at local rates.

Digital Wireless Receiver

Digital Wireless Colour Camera

Recordable CCTV Kit CWD3

Installation and Operating Instructions

YOUR HELPLINE 0844 736 9149

www.friedland.co.uk

Lines open Monday to Friday 9.00am to 5.00pm. Calls charged at local rates.

These instructions should be retained in a safe place for future reference.

CCTV

2GB Micro SD Memory

Card and Adaptor

3. INSTALLATION

3.1 Contents and Connections

NOTE:

"If the wireless camera is located within 1m to 1.5m from the wireless receiver and the

camera's volume on the receiver is turned on , then you may hear a whistling noise on

the monitor which if feedback picked up by the microphone. In this case please locate

the camera further away from the receiver to prevent this noise."

"If the power connection to the camera is kept outdoors, ensure the connection is

suitably protected."

TV / MONITOR

Receiver

Power Supply

Adaptor

WIRELESS CAMERA

Camera Power

Supply Adaptor

WIRELESS

RECEIVER

Turn power

on here

Video Signal

to RCA Input

Connect to

DC 5V/1A port

on Wireless

Receiver

to Wireless Cammera

WIRELESS CAMERA

Camera Power

Screw the Camera Bracket

Screw the Camera Antenna

clockwise on to the back of the Camera

clockwise on to the lower

body of the Camera

Screw the Camera Bracket

Screw the Camera Antenna

clockwise on to the back of

the Camera

clockwise on to the lower

body of the Camera

to Wireless Cammera

Connect to

3.5mm Phone

Jack on Wireless

Receiver

Wireless

Receiver

Connector Cable

(Optional for 7”

LCD DVR receiver)

Connect to Audio Input on TV

Yellow = Video

White = Audio

YOUR HELPLINE

0844 736 9149

www.friedland.co.uk

Trouble Shooting page 9 or call the Customer Helpline

available Monday to Friday 9.00 am to 5.00pm.

3.2 Powering up the system

Insert the memory card into the DVR if not already tted

Press and Hold power key for one second to power hold the power. Press and hold the power

key for two seconds to power off the system.

After system power on, adjust the camera viewing position again if necessary.

The 7" LCD monitor DVR is fitted with a rechargeable battery and

can operate for up to 4 hours (in power save mode) on battery power

once fully charged. The monitor can be carried around anywhere

within operating range of the cameras, but should be used in a dry

environment as it is not weatherproof.

ON/OFF

power button

Micro SD card slot

on 7" LCD DVR

Trouble Shooting

PROBLEM SOLUTION

No camera picture The power supply adaptor for the monitor

camera(s) is not plugged in.Camera out

of range. Locate camera closer to the

receiver.

Poor picture quality Clean the camera lens.

A white image

appears at night The camera's infra-red LEDs shine

invisible light that reects of surfaces such

as glass causing white light. Place the

camera on the other side of windows to

try to improve the night vision or place in a

well lit area.

The system will

not record under

SCHEDULE/

MOTION detection setting

Ensure correct DATE AND TIME has

been set and the Record Schedule setup

correctly.

Ensure the memory card is inserted into

DVR and formatted.

3.3 Setting the Camera Channel (Optional)

3.4 Pairing the Camera to Receiver (Optional)

The wireless cameras will be supplied preset to channel 1 and channel 2.

The wireless monitor supports up to 4 wireless cameras. Follow the step below to set or

change the monitor channel of the camera. If you are adding another camera to link with the

supplied monitor in this kit, then ensure its channel is set to a different channel to the existing

camera(s).

Follow the steps in 6.1 Camera Setup (p.16) SETUP section to set or change the channel

of the camera. If you are adding another camera to link with the supplied receiver in this kit,

then ensure its channel is set to a different channel to the existing camera(s).

Pairing Key

YOUR HELPLINE

0844 736 9149

www.friedland.co.uk

Trouble Shooting page 9 or call the

Customer Helpline available Monday to

Friday 9.00 am to 5.00pm.

Inhaltsverzeichnis

Andere Response Sicherheitssystem Handbücher

Response

Response Protector P500S Montageanleitung

Response

Response CENTURION SCOUT Bedienungsanleitung

Response

Response CWK6 Bedienungsanleitung

Response

Response SL2 Montageanleitung

Response

Response ML6 Bedienungsanleitung

Response

Response QC 3670 Technisches Handbuch

Response

Response SL3 Bedienungsanleitung

Response

Response CWFK1/CA3 Bedienungsanleitung

Response

Response SA1 E Bedienungsanleitung

Response

Response SA3 E PLUS Bedienungsanleitung

Response

Response RE3000S Bedienungsanleitung

Response

Response SL5 Montageanleitung

Response

Response RE5000AD Bedienungsanleitung

Response

Response CWK5 Bedienungsanleitung

Response

Response SA1 E Montageanleitung

Response

Response SA5 E Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung