7
When to use NORMAL Mode
• Normal mode should be the default mode for continually
running your ReSPR FLEX in occupied space.
When to use HIGH Mode
• High mode is used for burst purification, removing
pollutants like smoke or other significant odors. Do not run
HIGH Mode for more than one hour with occupants in the
room.
• When ReSPR FLEX is set to HIGH Mode the display will ask
you to set the square footage. Press the PURIFIER button
up or down to set the square footage of the room for the
most effective treatment.
When to use SLEEP Mode
• Access sleep mode on your remote control. Activating this
setting will dim the display screen settings.
•
When to use AWAY Mode
• AWAY Mode generates ozone for deep cleaning an area.
This mode can be used for removing smoke, cooking odors,
mold spores, viruses and bacteria. AWAY mode runs on a
timer and once it completes the cycle, it returns to Normal
Mode.
• Set AWAY Mode by pressing the AWAY Mode button. Each
time you press the button it will increase the time of the
cycle from 2:00, 4:00, 6:00 or 8:00 hours.
• If Away Mode is running when you enter the room, push the
Normal/High button once to return to Normal Mode.
NEVER USE AWAY MODE IN OCCUPIED SPACES
Child Lock function
• Choose press the Away Mode button for 5 seconds to activate the
lock function, press that button again to unlock the keypad.
Operating Modes
Normal: Continual Usage: 24/7; High: Continual Usage: 24/7;
Away: Limit to unoccupied spaces ONLY
