Retevis RA26 Bedienungsanleitung

RA26

Instruction Manual

Add: 7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli

6th Road, Jihua Street, Longgang District, Shenzhen, China

Web: www.retevis.com

E-mail: [email protected]

Facebook: facebook.com/retevis

Shenzhen Retevis Technology Co.,Ltd.

RA26

VHF Marine Radio

¾·ÄÁÏÅË¼ÅÈÆËÈ¹¾·É¿Ä½Ê¾¿ÉÃ·È¿Ä»È·º¿ÅƔÅËÍ¿ÂÂŰÄºÊ¾»

professional and humanized design of the radio during using.

Please read all instructions carefully and completely before

using the radio.

It is a multifunctional and well-designed marine radio which

meets the IMO (International Maritime Organization) regula-

tion.

As adopting advance waterproof technology, the radio is with

½ÅÅºÍ·Ê»ÈÆÈÅÅ¼Æ»È¼ÅÈÃ·Ä¹»Ƒ¹·ÄŲÅ·Ê·ÄºŲ·É¾·Â·ÈÃÍ¾»Ä

drops into the water.

CAUTION

• The power supply of this radio is DC 3.7V. Please

ËÉ»Ê¾»Â¿Ɩ¿ÅÄ¸·ÊÊ»ÈÏ·É¹ÅÄŰ½ËÈ»ºƔ

• The radio should be charged by the configured

adaptor.

• Do not expose the radio to direct sunlight for a long

time. Do not place it in environment or near any

heating devices below -20°C or above +55°C.

• Stop using and contact the local dealer if the radio

emits strange odor or smoke.

• Do not transmit without antenna installed, or the de-

vices will be damaged.

• Please power off in flammable and explosive envi-

ronment.

• Keep the radio at least 1 meter away from your ves-

sel’s magnetic navigation compass.

• The radio meets IPX7 waterproof requirement. How-

ever, once the radio has been dropped, waterproof

protection cannot be guaranteed because of possi-

ble damage to the radio’s sealed structure.

• Make sure the radio antenna, earphone jack cover

and battery cover are dry before attachment. Or the

radio inner components will be damaged.

ii iii

SUGGESTION

Clean the radio thoroughly with fresh water after exposure to

salt water. Dry it before operating. Otherwise the radio keys

and control components may be unusable due to salt crystal-

lization.

DO NOT submerge the radio in water. The waterproof protec-

Ê¿ÅÄÃ·ÏÄÅÊ¸»»Ů»¹Ê¿Ì»¿¼Ê¾»È·º¿ÅÈË¸¸»ÈÈ¿Ä½Å¼»·ÈÆ¾ÅÄ»

cover or DC jack cap is damaged in unexpected accident.

Please contact the local dealer if they are damaged.

FEATURES

Water-resistant and Float

The radio water-resistant protection meets IPX7 require-

ments. Can be 1 meter depth in water for 30 minutes. The

È·º¿Å¹·ÄŲÅ·Ê¿Ä¼È»É¾ÅÈÉ·ÂÊÍ·Ê»ÈÍ¿Ê¾Ê¾»ÉÊ·Äº·Èº·¹¹»É-

sories-battery, belt clip and antenna.

When a third-party battery, belt clip and antenna etc. are

used, the radio may sink.

Flash Alarm

The radio will float, make alarm sound and send out auto-

matic flash alarm when drops into the water. As the LED

Â¿½¾ÊŲ·É¾¿Ä½ƑÊ¾»È·º¿Å¹·Ä¸»»·É¿ÂÏÈ»ÊÈ¿»Ì»ºÊÅÉËÆÆÅÈÊÊ¾»

emergent rescue. This function works even the radio is pow-

»È»ºÅŮƔ

Flash Warning

Light

Alarm Sound

Flash Warning Light

CONTENTS

PREPARATION

Standard Accessories..................................................1

Preparation....................................................................1

Charging the Battery Pack.........................................1

Install/Remove Antenna.............................................2

Install Belt Clip...........................................................2

GET AQUAINTED

Appearance ...................................................................3

Display ...........................................................................4

BASIC OPERATION

Power ON/OFF...............................................................6

Adjust the Volume Level...............................................6

Adjust the Squelch Level .............................................6

Transmit and Receive ...................................................6

Transmit.....................................................................6

Receive .....................................................................6

Select Channel Group ..................................................7

Select Channel..............................................................7

Channel 16 ................................................................ 7

CALL Channel ...........................................................7

Weather Channel.......................................................8

Edit CALL Channel ......................................................8

Monitor Function...........................................................8

Volume Maximum Function .........................................9

Volume Mute Function..................................................9

Automatic Backlight .....................................................9

Key Lock ........................................................................9

Vibration Water Draining Function..............................9

SCAN OPERATION

Scan Types ..................................................................10

Set TAG Channels .......................................................10

Set/Cancel Single TAG Channels ............................10

Set/Cancel All TAG Channels ..................................10

Scan Operation ...........................................................10

DUAL/TRI WATCH

Description..................................................................11

Operation.....................................................................11

SET MODE

Set Mode Operation....................................................12

Set Mode Items ...........................................................13

VHF Marine Channel List ...........................................15

SPECIFICATION ..........................................................16

TROUBLESHOOTING..................................................17

1 2

PREPARATION

■Standard Accessories

Carefully unpack the radio. We recommend that you identify

items listed in the following table before discarding the pack-

ing materials. If any item is missing or has been damaged,

please contact the dealer immediately.

Items Quantity

Antenna 1

AC Adaptor 1

Belt Clip (With Screws) 1

Hand Strap 1

Instruction Manual 1

■Preparation

DCharging the Battery Pack

1. Connect the adaptor to AC power.

2. Open the radio charging port cover. Connect the adaptor

with the radio USB charging port to start charging. LCD

appears “ ” indicates charging.

Power Adaptor

AC Outlet

Charging Port

3. If the battery is full charging, LCD appears “FL”. You

should remove the adaptor.

• If you do not insert the battery pack while charging, the

LCD appears “Er”.

4. Charge by Other Power Supplies

• Charge by computer USB port

NOTE: Few computers do not meet the voltage and cur-

rent as required.

Charging Port

Normal USB Cable(Micro-B)

• Charge by Micro-B adaptor

NOTE: The power supply output should be 5V/1A.

Charging

Port

Power Bank

AC Adaptor

Car Charger

DInstall/Remove Antenna

1. ÅÄÄ»¹ÊÊ¾»ÉËÆÆÂ¿»ºŰÎ·¸Â»·ÄÊ»ÄÄ·ÊÅÊ¾»·ÄÊ»ÄÄ·¹ÅÄ-

nector, rotate it clockwise until it is tight.

2. To remove it, rotate it counter clockwise.

DInstall Belt Clip

1. Attach the belt clip to radio rear cover. Ensure the screw

holes are aligned.

2. Screw tightly using Phillips screwdriver.

3 4

GET AQUAINTED

■Appearance

PTT

MI C

CH AR GE





















Loudspeaker

Microphone

LCD Display

[PTT] Key

• Hold down [PTT] to transmit. Speak with normal tone.

• Release [PTT] to receive.

Power Key

• Hold down this key for 1 second to power on/off the

radio.

Charging Port

• Push down to open the charging port.

• The USB port is for charging only. Cannot support data

communications.

NOTE: Ensure the cover for the DC charging connector

¿É·ůÎ»ºÊ¿½¾ÊÂÏÊÅ·ÌÅ¿ºÍ·Ê»È¿Ä½È»ÉÉƔ

Earphone Jack (SP/MIC)

• External earphone/microphone jack.

• Revolve the jack counter clockwise to open. Revolve

clockwise to close.

• This jack can be connected with computer for data com-

munication through programming cable.

NOTE: ÄÉËÈ»Ê¾»¹ÅÌ»È¼ÅÈÊ¾»»·ÈÆ¾ÅÄ»À·¹Á¿É·ůÎ»º

tightly to avoid water ingress.

[SCAN]/[DUAL]

• Press to start or stop scan mode (including normal and

priority scan).

• Hold on 1 second to enter the Dual or Tri-watch mode.

• Push to exit the watch mode.

• Hold this key and [HI/LO] key for 1 second to activate

the Vibration Draining Function.

[C/16]

• Press to select Channel 16.

• Hold for 1 second to select Call Channel.

• The factory default for Call Channel is Channel 9.

• When the Call Channel is selected, hold for 3 seconds

to enter the Call Channel programming mode.

• While in the set mode, press this key to exit.

[VOL/SQL]/[MONI]

• Press to enter the volume adjustment mode. Press again

to enter the squelch adjustment mode.

• Hold for 1 second to active the Monitor Function.

• ÅÂºÊ¾¿ÉÁ»ÏÍ¾¿Â»ÆÅÍ»ÈÅŮƔÈ»ÉÉ[ ] at the same

time to power on and enter the set mode.

• While in the set mode, press to select set items.

• While holding this key, press [Z]to turn on the Volume

ËÊ»ËÄ¹Ê¿ÅÄƔ»Æ»·Ê·½·¿ÄÊÅÊËÈÄÅŮÊ¾¿É¼ËÄ¹Ê¿ÅÄƔ

[Hi/Lo]/[LOCK]

• Press to select high or low output power.

• ÅÂº¼ÅÈʸÉ»¹ÅÄºÊÅÊËÈÄÅ¹ÁËÄ¹Ê¿ÅÄÅÄÅÈÅŮƔ

[Y]/[Z]

• Press to select operation channel.

• While in the set mode, press to select the items.

• While in channel scan, press to change the scan direc-

tion.

 Antenna Connector

• ÅÄÄ»¹ÊÍ¿Ê¾ʼʷǣÉËÆÆÂ¿»º·ÄÊ»ÄÄ·Ɣ

 [FAV]/[TAG]

• Press to sequentially select the favorite (TAG) channel

while ignoring untagged channel.

• Hold for 1 second to set or clear the TAG channel.

• Hold this key and power on to clear or set all TAG chan-

nels.

 [CH/WX]/[U/I/C]

• Press this key to select normal channel or weather chan-

nel.

• Hold for 1 second to select USA Channel, International

Channel or Canada Channel.

■Display

There are several kinds of symbols on the LCD display. Each

symbol represent one meaning. Knowing these meaning

helps the operation.

ICON DESCRIPTION

Appear while transmitting.

LOW

Appear while selecting low power.

"LOWͲŲ·É¾»ÉÍ¾»Ä¼ÅÈ¹»ºÊÅÉ»Â»¹ÊÂÅÍÆÅÍ-

er because of battery low voltage or radio high

temperature etc.

ATIS Appear while working in ATIS Channel.

USA Select USA Channel.

5 6

ICON DESCRIPTION

INT Select International Channel.

CAN Select Canadian Channel.

Appear while channel is busy.

Flash while in Scan Channel.

Appear when TAG Channel is selected.

CALL Appear when Call Channel is selected.

Battery indicator.

Indicate piecewise while charging.

Flash while full charging.

SCAN Flash while scanning.

Appear while key locked.

DUP Appear while a duplex channel is selected.

DUAL Appear while dual watch.

TRI Appear while tri-watch.

ICON DESCRIPTION

Indicate the operating channel number.

Indicate the selected condition in set mode.

Indicate assistant channel.

Appear while setting volume.

Appear while setting squelch.

Appear while setting mode.

Appear while weather alarm.

WX Appear while weather channel is selected.

BASIC OPERATION

■Power ON/OFF

1. Hold [ ] for 2 seconds to power on.

2. Hold [ ]·½·¿Ä¼ÅÈʸÉ»¹ÅÄºÊÅÆÅÍ»ÈÅŮƔ

■Adjust the Volume Level

The volume level can be adjusted through [VOL/SQL] and

[Y]/[Z].

1. Press [VOL/SQL] and then press [Y]/[Z]to adjust the

volume level.

• The “VOLƢŲ·É¾»ÉƔ

• There are 31 volume levels. OF means the volume is

ÊËÈÄ»ºÅŮƔ

• When no operation is performed within 5 seconds, the

radio returns to normal mode.

2. Press [VOL/SQL] again to exit the volume adjustment

mode.

■Adjust the Squelch Level

The squelch level can be adjusted through [VOL/SQL] and

[Y]/[Z]. Set the proper squelch level to have better receive

É¿½Ä·Â·Äº»Ů»¹ÊË·ÂÉ¹·ÄƔ

1. Press [VOL/SQL] for twice and then press [Y]/[Z]to ad-

just squelch level.

• “SQLƢŲ·É¾»ÉƔ

• The radio has 11 squelch levels. OP is completely open.

10 is maximum squelch.

• When no operation is performed within 5 seconds, the

radio returns to the normal mode.

2. Press [VOL/SQL] again to exit squelch level adjustment

mode.

■Transmit and Receive

DTransmit

1. Press [Hi/Lo] to select transmit power.

• “LOW” appears when low power is selected.

• Select low power for short distance communication

while high power for long distance communication.

• Some channels are for low power transmit only.

2. Press and hold [PTT] to transmit. Then speak to micro-

phone.

• “ ” appears.

• Channel 70 cannot be used for normal transmission.

3. Release [PTT] to receive.

NOTE:

• Transmitting without antenna will damage the radio.

• To forbid the long time continuing transmit, please turn on

TOT Function through PC programming software.

• Hold the microphone 5-10cm from your mouth while talking.

DReceive

1. Enter volume adjustment mode. Press [Y]or [Z]to ad-

just.

7 8

2. Enter squelch adjustment mode. Press [Y]or [Z]to ad-

just.

• “ ” appears and audio comes from the loudspeak-

er when receiving signal.

• The radio has Power Saving Function. The power saving

function activated automatically when no signal is re-

ceived within 5 seconds.

■Select Channel Group

This radio contains USA Channel, International Channel and

Canadian Channel. Choose the appropriate channel groups

for your operating area.

1. Press [CH/WX] to select a regular channel group.

• Press again if the radio indicates weather channel.

2. Press and hold [CH/WX] to change the channel group.

USA Channel, International Channel and Canadian Chan-

nel can be selected sequentially.

3. Press [Y]or [Z]to select channel.

• “DUP” appears when a duplex channel is selected. “A”

appears when a simplex channel is selected.

International Channel Group

USA Channel Group

Canadian Channel Group

■Select Channel

DChannel 16

Channel 16 is the distress and safety channel. It is used for

establishing initial contact with a station and for emergency

communications. Channel 16 is monitored during both dual

watch and tri-watch.

1. Press [C/16] to select Channel 16.

2. Press [CH/WX] to return to the channel used before

Channel 16. Press [Y]or [Z]to select operating channel.

DCALL Channel

Each channel roup has a Call Channel. The Call Channel is

monitored during tri-watch. The factory default for Call Chan-

nel is Channel 9. It can be reprogrammed.

1. Press and hold [C/16] for 1.5 seconds to select the Call

Channel of the current channel group. “CALL” and call

channel number appears.

2. Press [CH/WX] to return to the operating channel used

before call channel. Or press [Y]or [Z]to select other

operating channel.

DWeather Channel

This radio has 10 weather channels. It can detect a weather

alert sound automatically in the selected weather channel

when receiving and scanning.

1. Press [CH/WX] to select weather channel or normal

channel.

• Appear “WX” when weather channel is selected.

• Appear “WX ALT” when weather alert is turned on.

2. Press [Y]or [Z]to select channel.

■Edit CALL Channel

A CALL Channel can be edited in each channel group. The

factory default is Channel 9.

1. Hold [U/I/C] for 1 second to select a desired programmed

channel group (USA, International or Canadian).

2. Hold [C/16] for 1 second to select CALL Channel.

• Appear “CALL” and CALL Channel number.

3. Hold [C/16] for 3 seconds until a long “BEEP” sound and

two “DUDU” sound are heard to enter CALL Channel pro-

gramming mode.

• ¾·ÄÄ»ÂÄËÃ¸»ÈÉÊ·ÈÊÉŲ·É¾¿Ä½Ɣ

4. Press [Y]or [Z]to select desired CALL Channel.

5. Press [C/16]ÊÅ¹ÅÄŰÈÃ·ÄºÉ·Ì»¾·ÄÄ»ÂƔ

• Press [C/16] to cancel and exit.

■Monitor Function

The Monitor Function can open the squelch and monitor use-

ful signals. For setting monitor key, please refer to the expla-

nation at the back.

• Hold [MONI] for 2 seconds to activate monitor function.

• “ ƢŲ·É¾»É·Äº·ÉÅËÄº¿É¾»·ÈºÍ¾»ÄÃÅÄ¿ÊÅÈ¼ËÄ¹-

tion is activated.

9 10

■Volume Maximum Function

The Volume Maximum Function can temporarily maximize

the volume level. This function is invalid when the volume lev-

el reaches 31.

1. Hold [VOL/SQL] and press [Y]to turn on this function.

• The volume will be maximum.

• The rolling indicator strip appears.

2. Hold [VOL/SQL] and press [Y]ÊÅÊËÈÄÅŮƔ

■Volume Mute Function

The Volume Mute Function can be activated temporarily. This

function is invalid when the volume level is OF.

1. Hold [VOL/SQL] and press [Z]to activate.

• The volume is mute.

• ¾»ÌÅÂËÃ»¿Äº¿¹·ÊÅÈÉÊÈ·ÆŲ·É¾»ÉƔ

2. Hold [VOL/SQL] and press [Z]ÊÅÊËÈÄÅŮƔ

■Automatic Backlight

The Automatic Backlight Function is convenient for night op-

»È·Ê¿ÅÄƔ¾¿É¼ËÄ¹Ê¿ÅÄ¹·Ä¸»ÊËÈÄÅÄƭÅŮ¿ÄÉ»ÊÃÅº»Ɣ

• Press any key except [PTT] to turn on LCD and keypad

backlight.

• The backlight is automatically turned off after 5 seconds

without operation.

■Key Lock

The Key Lock Function locks all keys except [ ], [PTT],

[VOL/SQL] and [LOCK] to avoid accidental operation of

channel switch.

• Hold [LOCK]¼ÅÈʸÉ»¹ÅÄºÊÅÊËÈÄÅÄƭÅŮÊ¾¿É¼ËÄ¹Ê¿ÅÄƔ

■Vibration Water Draining Function

The Vibration Water Draining Function helps to drain the wa-

ter away from the loudspeaker housing. It can prevent water

ingress to affect the loudspeaker voice quality. The radio

emits a vibrating sound when this function is activated.

• Press and hold [SCAN] and [Hi/Lo] at the same time to ac-

tivate.

• A deep sound emits for 10 seconds to drain water.

• Any key operation is invalid when vibration water draining is

activated.

SCAN OPERATION

■Scan Types

The Scan Types including normal scan and priority scan, can

be selected in the set mode (Please refer to set mode opera-

tion).

The weather channel will be scanned also if the weather alert

function is activated.

Set TAG channels before scanning. Cancel TAG for channels

not need to be scanned.

Normal scan: Scan TAG channels. Channel 16 won’t be

scanned if it is not set as TAG channel.

Priority scan: Scan Channel 16 during normal scan.

Normal Scan Priority Scan

■Set TAG Channels

»ÊƺЄƻ¼ÅÈ¹¾·ÄÄ»ÂÉÄ»»ºÊÅ¸»É¹·ÄÄ»ºƔ·Ä¹»Â

ƺЄƻÍ¾¿¹¾¿ÉÄÅÄ»»ºƔ¾»ËÄÊ·½½»º¹¾·ÄÄ»ÂÉÍ¿ÂÂ¸»ÉÁ¿ÆÆ»º

during the scan period.

DSet/Cancel Single TAG Channels

1. Press [U/I/C] to select channel group.

2. Press [Y]or [Z]to select the desired TAG channel.

3. Hold [FAV/TAG] for 1 second to set the current channel

as TAG channel.

• ơЄƢ·ÆÆ»·ÈÉÅÄƔ

4. Hold [FAV/TAG] again for 1 second to cancel the TAG

channel.

• “Є” disappears on LCD.

DSet/Cancel All TAG Channels

1. ÅÍ»ÈÅŮƔÅÂº[FAV/TAG] and press [ ] to power on.

All TAG channels will be canceled in the selected channel

group.

2. Repeat the above operation to set all channels as TAG

channels.

■Scan Operation

Set scan resume timer in the set mode.

1. Press [SCAN] to start normal scan or priority scan.

• “SCANƢŲ·É¾»ÉÅÄƔ

• “16” appears on the sub channel readout during priority

scan.

• The scan pauses when a signal is received (The resume

time can be set in the set mode).

• Channel 16 is monitored in priority scan.

• Press [Y]or [Z]to change the scan direction.

2. Press [SCAN] to stop scanning. Or press [PTT], [C/16],

[CH/WX] and [U/I/C] to stop.

11 12

No. Display Set Items Set Parameter Options Default Value

1Prompt Tone (OFF) / (ON) (ON)

2Weather Alert (OFF) / (ON) (OFF)

3Priority Scan (OFF) / (ON) (OFF)

4Scan Resume Timer (OFF) / (ON) (OFF)

5Automatic Scan (OFF) / (ON) (OFF)

6Dual/Tri Watch - (Dual watch) / - (Tri watch) - (Dual watch)

7Monitor Key Function Pu (Push) / Ho (Hold) Pu (Push)

8Automatic Backlight (OFF) / (ON) (ON)

9LCD Contrast Hi / Lo Hi

10 Automatic Power Save (OFF) / (ON) On

11 Float Alarm (OFF) / (ON) (OFF)

12 Vibration Water Draining (OFF) / 2 / 5 / 10 (seconds) (OFF)

DUAL/TRI WATCH

■Description

This radio contains DUAL/TRI WATCH, can be selected in the

set mode.

Dual watch: Watch and monitor in turns between the current

channel and Channel 16.

Tri watch: Watch and monitor in turns among the current

channel, Channel 16 and CALL Channel.

Dual Watch Tri Watch

CALL channel

Receive signal during watch and monitor:

• Receive signal in Channel 16

Dual/tri watch pause in Channel 16 until the signal disap-

peared.

• Receive signal in CALL Channel

Tri watch switches to dual watch until the signal disappeared

in CALL Channel.

■Operation

1. Hold [SCAN/DUAL] for 1 second to start dual/tri watch.

• “DW” flashes during dual watch; “TW” flashes while tri

watch.

• A “BEEP” sound emits when signal is received in Chan-

nel 16.

• Tri watch switches to dual watch when signal received in

CALL Channel.

2. Press [SCAN/DUAL] to cancel dual/tri watch.

For example: Tri watch in International Channel 01.

Start tri watch. Receive signal in call

channel 09.

Resume tri watch after

signal disappeared.

Open Channel 16 prior

when signal is received

in Channel 16.

SET MODE

■Set Mode Operation

The Set Mode can be used to change the settings of the ra-

dio’s function. The function settings including Prompt Tone,

Weather Alert, Priority Scan, Scan Resume Timer, Auto Scan,

Dual/Tri Watch, Monitor Key Function, Automatic Backlight,

LCD Contrast, Power Save, Float Alarm and Vibration Water

Draining.

Set mode operation as below.

1. ÅÍ»ÈÅŮƔ

2. Press and hold [VOL/SQL], power on to enter set mode.

3. Release [VOL/SQL], LCD appears “bEEP”.

4. Press [VOL/SQL] to select desired setting items.

5. Press [Y]or [Z]to select desired setting parameter.

6. Press [C/16] to exit set mode.

13 14

■Set Mode Items

DPrompt Tone

ËÈÄÅÄƭÅŮÊ¾»ÆÈÅÃÆÊÊÅÄ»Í¾¿Â»ÅÆ»È·Ê¿Ä½Ɣ

DWeather Alert

The U.S.A NOAA broadcast station will transmit weather alert

when there are significant weather information. When the

weather alert function is activated, the radio will send alert.

“ ƢŲ·É¾»É·ÊÊ¾»É·Ã»Ê¿Ã»Ɣ¾»¹ËÈÈ»ÄÊËÉ»ºÍ»·Ê¾»È

channel will be scanned during the scan.

• With this function enable, “ ” appears when weather

channel is selected.

DPriority Scan

The radio has 2 scan types, Normal Scan (of) and Priority

Scan (on). Normal scan searches all TAG channels in the se-

lected channel group. Priority scan scans Channel 16 during

normal scan.

DScan Resume Timer

¾»¹·Ä»ÉËÃ»¿Ã»È¹·Ä¸»ÊËÈÄ»ºÅŮƺÅ¼ƻƭÅÄƺÅÄƻƔ

• (of): The scan will pause until the signal disappears.

• (on): The scan will pause for 5 seconds and then resume.

DAutomatic Scan

The Automatic Scan will be activated when no signal is re-

ceived and no operation is performed for 30 seconds.

DDual/Tri Watch

Select dual (d-)/tri (t-) watch.

DMonitor Key Function

Press Monitor Key, the squelch inhibit function will be turned

ÅŮÊÅÃÅÄ¿ÊÅÈÊ¾»ÅÆ»È·Ê¿Ä½¹¾·ÄÄ»ÂƔ¾»È»·È»ÊÍÅÅÆÊ¿ÅÄÉ¼ÅÈ

opening key.

• Pu (PUSH): Press and hold [MONI], the sound emits from

loudspeaker. Keep holding [MONI], the loudspeaker con-

tinuing opened. Release [MONI], the loudspeaker closed.

• Ho (HOLD): Press and hold [MONI] for 1 second, the

sound emits from loudspeaker. The mode remains when re-

lease [MONI]ƔÈ»ÉÉÅÊ¾»ÈÁ»ÏÊÅÊËÈÄÅŮÊ¾»ÂÅËºÉÆ»·Á»ÈƔ

DAutomatic Backlight

The Automatic Backlight Function is convenient for night op-

eration. Press any key except [PTT] to turn on LCD and key-

pad backlight.

• The backlight is automatically turned off after 5 seconds

without operation.

DLCD Contrast

The LCD Contrast can be selected according to using envi-

ronment. It can be set as “Hi” or “Lo”.

DPower Save

The Power Save Function can reduce the current drain and

extend the battery using time.

When the power save function is opened, the radio will enter

power save mode automatically if no signal is received or no

operation is performed within 5 seconds.

DFloat Alarm

¾»ÄÊ¾»È·º¿ÅºÈÅÆÉ¿ÄÊÅÊ¾»Í·Ê»ÈƑ¿ÊÍ¿ÂÂŲÅ·Ê·ËÊÅÃ·Ê¿¹·ÂÂÏƑ

Ã·Á»¿ÄÊ»ÈÃ¿ÊÊ»ÄÊ·Â·ÈÃÉÅËÄº·ÄºŲ·É¾·Â·ÈÃÍ¾¿¹¾¹·Ä¸»

easily found in water.

¾»È·º¿ÅÍ¿ÂÂÃ·Á»¿ÄÊ»ÈÃ¿ÊÊ»ÄÊ·Â·ÈÃÉÅËÄºÍ¾»ÄŲÅ·ÊÉÅÄ

water. This function stops automatically when press any key

ÅÈŰÉ¾ÅËÊÊ¾»È·º¿Å·¼Ê»ÈʸʷÉ»¹ÅÄºÉƔ

DVibration Water Draining

The Vibration Water Draining Function will be automatically

·¹Ê¿Ì·Ê»ºÍ¾»ÄÊ¾»È·º¿ÅŰÉ¾»ºÅËÊ¼ÈÅÃÍ·Ê»ÈƔ

¾¿É¼ËÄ¹Ê¿ÅÄ·¹Ê¿Ì·Ê»É·ËÊÅÃ·Ê¿¹·ÂÂÏ·¼Ê»ÈŲÅ·Ê·Â·ÈÃÉÅËÄº

stops. The loudspeaker emits 5 or 10 seconds deep vibrate

sound to drain the water.

NOTE: ¾¿É¼ËÄ¹Ê¿ÅÄ¿É¿ÄÌ·Â¿ºÍ¾»ÄËÉ¿Ä½»ÎÊ»ÈÄ·ÂÂÅËº-

speaker microphone.

Inhaltsverzeichnis

Andere Retevis Seefunkgerät Handbücher

Retevis

Retevis RM20 Bedienungsanleitung

Beliebte Seefunkgerät Handbücher anderer Marken

Garmin

Garmin GTX 45R Bedienungsanleitung

Garmin

Garmin GTX 33 Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane TT-6222A VHF DSC Bedienungsanleitung

Garmin

Garmin VHF 315 Series Bedienungsanleitung

Vesper

Vesper Cortex HV1 Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane Sailor RT5022 VHF DSC Bedienungsanleitung

Saab

Saab R5 SUPREME AIS Bedienungsanleitung

AMEC

AMEC CAMINO-701 Bedienungsanleitung

GME

GME GX800 Bedienungsanleitung

West Marine

West Marine VHF580 Bedienungsanleitung

Uniden

Uniden UM425 VHF DSC Bedienungsanleitung

ACR Electronics

ACR Electronics AISLink CB2 Bedienungsanleitung

Barco

Barco MDSC-2226 Bedienungsanleitung

Blue Mark

Blue Mark DroneBeacon 120 Series Bedienungsanleitung

Simrad

Simrad DSC1400 Bedienungsanleitung

Raveon

Raveon RV-M8G Bedienungsanleitung

Trig Avionics

Trig Avionics TT31 Bedienungsanleitung

Uniden

Uniden UM380 Bedienungsanleitung