Retigo Vision Leitfaden

Vision VENT

Technical documentation

RETIGO 2011

CONTENT

INTRODUCTION

INTRODUCTION..........................................................................................................................2

1. Contact......................................................................................................................................2

2. Use and description of the hood function .....................................................................................2

3. Improper use of this appliance ....................................................................................................2

4. Important notices.......................................................................................................................2

5. How to use this Manual ..............................................................................................................3

6. Binding regulations ....................................................................................................................3

7. Limited.......................................................................................................................................3

SAFETY INSTRUCTION................ ..............................................................................................5

1. General safety data.....................................................................................................................5

2. Operating personnel designation..................................................................................................5

3. Perfect condition ........................................................................................................................5

4. Safety rules for work with the RETIGO Company products.............................................................5

TECHNICAL DATA.......................................................................................................................6

TRANSPORT AND INSTALLATION..............................................................................................7

1. Appliance transportation ............................................................................................................. 7

2. Waste disposal ...........................................................................................................................7

3. The Appliance installation ........................................................................................................... 7

4. Eletrical connections of the air condensation hood ........................................................................8

5. The hood set-up and control .....................................................................................................10

MAINTANCE AND CLEANING.................................................................................................. 12

INTRODUCTION

The RETIGO Company is very grateful to you for your

decision to use our equipment. Your newly acquired

appliance represents rare fusion of long-term experien-

ce of our best chefs, latest scientic developments and

advantages of modern technology. To make sure you

will be happy with the performance of our appliance from

the very beginning, we would like to offer additional in-

formation and some advice for problem – free operation.

The RETIGO Company guarantees perfect func-

tioning and high quality service. Therefore we are

offering:

• The Warranty guarantees 12 months of trouble-

free operation of the appliance. If you meet the sales

conditions, Warranty extends to 24 months; please

see the current price list.

• Spare parts delivered quickly on demand

• Technical and consulting service tied to service and

maintenance

• Professional consulting service by our professional

chefs

We wish you a lot of satisfaction working with the

RETIGO appliances and a lot of happy customers.

1. Contact

Should you have any questions, we are available

at the following phone numbers and addresses:

Address:

Retigo, s.r.o.

Láň 2310, PB 43

CZ 756 64 Rožnov pod Radhoštěm

Tel./Fax: +420 571 652 434

Our professional salespeople are ready to help

you at this telephone Hot-line:

+420 603 571 360, +420 604 568 562

Our professional cooks are ready to help you at

this telephone Hot-line:

+420 603 854 372, +420 603 308 461

Our professional service technicians are ready

to help you at this telephone Hot-line:

+420 605 769 916, +420 603 895 191

E-mail: [email protected]

www.retigo.cz

2. Use and description of the hood

The RETIGO hoods are designed for extraction and

condensation of vapors emanating from the Vision mo-

dels of the RETIGO combi steamers. They are control-

led by the combi steamer’s electronics.

After the combi steamer door is shut and prepa-

ration of food is triggered, the temperature inside the

cooking chamber is carefully monitored. If this tempe-

rature exceeds the temperature necessary for the hood

activation, extracting will be triggered at the lowest

level. If – during or after food preparation – the combi

steamer’s door opens, the appliance will automatically

switch to a higher level of vapor extraction in order to

achieve higher vapor suction. After the door is shut

again, the output of the hood will decrease back to

its original level. The hood will be completely turned

off once the cooking chamber temperature drops back

below the activation level.

This hood holds relevant EU Certicate of Confor-

mity.

3. Improper use of this appliance

Other than the above specied use of the appliance

shall be considered irregular and harmful.

The RETIGO Company bears no responsibility for any

damages, which may result from such action. In such

a case, all the risk is carried solely by the user!

4. Important notices

• This appliance is not designed for use by people,

whose physical, sensory or mental abilities or lack of

experience or training prevents them from safe use

of this device, unless they are properly supervised

and unless they were properly instructed by a person

responsible for their safety. At no time are children

allowed to operate or touch this machine.

• By carefully studying the User’s Manual you will gain

important knowledge regarding the design, control and

safe operation of this appliance.

• After unpacking, please make sure all the parts have

been delivered. The delivery contains: hood, 3 pieces

INTRODUCTION

of grease lters, UTP cable 0.5 m, two-way adaptor

RJ 45, sheet metal cover batten (for installation of the

hood on a combi steamers with left door opening),

and technical documentation.

• Make sure the appliance type meets its required

conditions.

• Installation may be performed only by a professional,

who carries a valid license for such operation.

• All connections must meet current regulations,

norms and the User’s manual.

• Adjustments and the initial operation start-up must

be done by a service technician certied by the manu-

facturer. The list of such license carrying companies is

available at our website www.retigo.cz.

• Improper or faulty connections may cause damages,

which are outside the manufacturer’s responsibility.

• It is absolutely necessary to obey all rules and regu-

lations during maintenance and cleaning.

• In case of a break-down, please contact your sale-

sperson or service partner or one of the companies

listed at our internet pages: www.retigo.cz.

Unprofessional repair attempts may damage

the appliance!

• In order to assure proper function, safety and a long-

term problem–free operation we recommend to have

your appliance checked at least once a year by one

of our partner service rms. This way you also secure

your investment.

• When you nish working with the appliance, please

turn off the electric supply.

• Only original parts may be used for repairing the

appliance.

• Malfunctions caused by unprofessional installation,

failure to adhere to norms, regulations or the User’s

manual during installation or during operation are not

responsibility of the manufacturer and all such actions

will void the warranty.

• This appliance is designed for professional use only

and must be operated solely by qualied and trained

personnel.

5. How to use this Manual

Please, read carefully the User’s operating and

service manual. Please follow these instructions during

operation, cleaning and maintenance. If any steps of

the process are unclear to you, seek additional infor-

mation from your deal-er or the manufacturer.

5.1 Used symbols

The symbols we use are designed to signal activi-

ties, which may affect your safety or health. They also

attempt to help you with preventive checks. The good

advice symbol’s role is to make your work easier.

Damage Prevention

This symbol informs you, how to handle the

appliance and its accessories. Improper han-

dling may cause damage to the appliance.

Friendly advice

This symbol signals no danger. You should,

however, pay attention to it, because it can

make your work easier and also help you to

avoid mistakes.

6. Binding Regulations

Generally valid and applicable legal regulations and

other binding rules for accident prevention and environ-

mental protection are not listed here individually, but

must be adhered to strictly. Some of those are listed

here:

• IEC 60335-1:2001 + A1:2004 + A2:2006,

IEC 60335-2-42:2002, EN 60335-1:2002 + A11:2004

+ A1:2004 + A12:2006 + A2:2006,

ČSN/EN 60335-2-99

ČSN EN 60335-2-42 ed. 3:2003, ČSN EN 61000-6-2nd

ed. 3:2006, EN 61000-6-2:2005, ČSN EN 61000-6-4

edition 2:2007, EN 61000-6-4:2007

• Law 22/1997 Sb., government regulation NV 17/2003

Sb., and 616/2006 Coll.

• European Council Directive: 2006/95/EC and

2004/108/EC.

This hood holds relevant EU Certicate of Conformity.

7. Limited warranty

All technical information, data, operation and service

instructions in this User’s Manual reect the latest state

of knowledge at the shipping time and were created

with our utmost care to help you the best we can accor-

ding to our experience. However, because of an ongo-

ing research and development, we reserve the right to

make technical alterations and changes concerning this

appliance. Therefore we bear no responsibility for da-

mages and break-downs caused by improper operation,

failure to follow this User’s manual, use of aggressive

chemical cleaning agents and improperly performed re-

pairs. We do especially emphasize that this covers spare

parts both delivered by our Company or spare parts not

tested or approved by our Company.

INTRODUCTION

Any reconstructions or alterations of the device

done by you are for safety reasons not allowed and

will remove all responsibility for consequent damages

from the RETIGO Company. Accidental mistakes or

omissions are covered within the contractual warranty

obligations, negotiated in the contract when elimina-

ting all further claims.

Any claims for damages, no matter the legal rea-

son applied, are not possible.

SAFETY INSTRUCTIONS

SAFETY INSTRUCTION

1. General safety data

This documentation contains required information

for adequate use of the above described appliance.

Knowledge and application of all safety instructions and

warnings provided by this Manual represent the basis

for safe activation of the appliance as well as for safe

operation and service of the appliance.

This documentations, however, does not contain, for

clarity reasons, all possible details for every version of

the product and cannot include every imaginable situa-

tion to be considered and anticipated during operation

and service. Should you require any further informati-

on or should you experience problems not sufciently

described in our Manual, please obtain such information

from your dealer or manufacturer by mail or by phone.

2. Operating personnel designation

Designate a specic person, who will operate the

appliance and train him or her. This device is designed

for professional use only and must be operated solely

by qualied and properly trained personnel.

3. Perfect Condition

Operate this appliance only while it is in a perfect

condition. Do not remove any safety features such as

covers etc. Do not make any alterations.

4. Safety rules for work with the RETIGO

Company products

To assure safe work with this appliance, please ad-

here to the following safety precautions. This way you

will prevent damage to your health.

Do not use aggressive and highly alkaline cleaning

agents.

Damage caused by improper cleaning is not covered

by the warranty. Please read the cleaning agents safety

instruction labels carefully. Do not use pressure clea-

ning or water sprays to clean the inside or outside of

your appliance.

TECHNICAL DATA

Basic technical parameters

Weight: 60 kg

Dimensions (d x w x h): 1130 x 930 x 412 mm

Noise - min./max.: 63 dB/ 68 dB

Airow max: 1000 m3/ h

Input max: 400 W

Required voltage: 1NN/ 200V-230V/ 50-60 Hz

2N/ 200V-230V/ 50-60 Hz

TRANSPORT AND INSTALLATION

1. Appliance Transportation

1.1 Appliance Transportation Instructions

When transporting this appliance, utmost care

must be exercised. Make sure that the product is not

damaged in any way.

When Receiving the Appliance:

a) Immediately after delivery, check the number of

parts according to the accompanying documents (bill

of lading, the invoice, transportation documents).

b) Check the state of packaging and the appliance.

In case of damage, please follow these steps:

- Immediately request a Damage Report, which will

describe the extent of damages.

- Make detailed photos of the damage.

- If the damage seems to be more than 10 000 CZK,

we recommend you consult a liquidator.

- Have the Damage Report certied by the driver, by

the transportation company or by an airport employee.

Packaging does not protect the appliance

from impact or from contact with sharp or

blunt objects.

After unpacking, please make sure it

contains all parts listed in the invoice.

2. Waste Disposal

The Retigo Corporation is entitled to use the Green

point trademark in accordance with Law 477/2001

Coll., (94/62/ES), which means the cost associated

with liquidation of the packaging materials are inclu-

ded in the product price. According to Law 185/2001

Coll., article 10 regarding waste, you should follow

these steps:

2.1 Liquidation of packaging

Sell the cartons to a waste disposal center. Put the

protective foil and the polystyrene skeleton into waste

containers marked for plastics.

2.2 Liquidation after useful life expiration

Please deposit the sheet metal parts to a waste

disposal centre for proper liquidation.

3. The Appliance Installation

3.1 Preparation for the Appliance Installation

• Before you start the hood installation, please discon-

nect the combi steamer from the electric sup-ply.

• Installation of the hood must be performed in accor-

dance with all relevant rules and norms valid in your

particular country.

• The hood will work properly only when installed on a

combi steamer with the following software versions or

higher:

- Blue Vision - 17.1.1

- Orange Vision - 7.12

• Unpack the hood from the delivery cartons and re-

move the protective foil.

• The hood is manufactured for a combi steamer with

the door, which opens to the right. In case you mount

the hood on a combi steamer that opens to the left,

you must replace the front hood cover. This cover is

included in your delivery package.

3.2 Placement of the Appliance on the Combi

Steamer

• Remove the side covers from the combi steamer

which will receive the hood. Unscrew the safety screws

with a screw driver and a wrench

Nr. 8 and replace the pins (see picture I).

• Place the hood on the combi steamer. Make sure

you correctly match the hood inlet (a pipe in the rear

part of the hood) to the combi steamer little chimney -

see picture II. Since the air condensation hood is quite

heavy (60 kg), make sure you have enough people

present for this task.

• Place the grease lters to the inlet opening in the

front part of the hood, these lters were delivered as

part of your package. Start with the two side lters -

picture III, as depicted in picture 1 (they are marked

with edging) and then place the middle lter between

them.

TRANSPORT AND INSTALLATION

Picture I – Use this pins instead of screws

• Place the hood on the combi steamer. Make sure you

correctly match the hood inlet (a pipe in the rear part

of the hood) to the combi steamer little chimney – see

picture II. Since the hood is quite heavy (60 kg), make

sure you have enough workers present for this task.

Picture II – Placing the hood on the combi steamer

• Place the grease lters into the intake opening in the

front part of the hood; these lters were delivered as

part of your package. Start with the two side lters,

as shown in picture III. (they are marked with edging)

and then place the middle lter between them.

Picture III - Grease lters installation

3.3 Check the installation location

Make sure that the electrical power supply meets

the parameters listed on the manufacturer’s label.

This will prevent possible installation complicati-

ons.

4. Electrical connections of the hood

• At the back side of the hood - picture IV you will nd

the M6 screw (for protective coupling) - position 1 and a

distributor pos. 2, which contains the electronic controls.

One supply cable (3 x 1.5 mm2) – position 3 and one

control cable (UTP) – pos. 4 exit the distributor.

Picture IV – View of the back side of the hood

Andere Handbücher für vision

Inhaltsverzeichnis

Andere Retigo Dunstabzugshaube Handbücher

Retigo

Retigo VISION vent 2 Leitfaden

Beliebte Dunstabzugshaube Handbücher anderer Marken

emmeti

emmeti RECUPA MED A-140 Leitfaden

Nibe

Nibe F135 Bedienungsanleitung

Kuppersberg

Kuppersberg INTRO 60 Montage- und Wartungsanleitung

Zephyr

Zephyr Spruce AK9834BS Installationsanleitung

Hisense

Hisense MH6INBG Bedienungsanleitung

Miele

Miele DA 1255 Bedienungsanleitung

Broan

Broan 46000 Bedienungsanleitung

GE Profile PV977 Originalbetriebsanleitung

FALMEC

FALMEC FFRIA24W5FS Bedienungsanleitung

Whirlpool

Whirlpool RH2600XL-1 SERIES Bedienungsanleitung

Küppersbusch

Küppersbusch DX ISLA Bedienungsanleitung

ETNA

ETNA AV360RVS Bedienungsanleitung

JUNO

JUNO JDF603E6 Bedienungsanleitung

Miele

Miele DA 6708 D Bedienungsanleitung

Tricity Bendix

Tricity Bendix LE 150 Handbuch

AEG

AEG X68163BV1 Bedienungsanleitung

AEG

AEG 125 D Bedienungsanleitung

Smeg

Smeg KSEV97X Bedienungsanleitung

Retigo vision Leitfaden

Beliebte Dunstabzugshaube Handbücher anderer Marken