RetroSound Apache Bedienungsanleitung

MODERN SOUND FOR YOUR CLASSIC

www.retromanufacturing.com

USER’S MANUAL

TABLE OF CONTENTS

WELCOME 3

WHAT’S IN THE BOX 4

PRECAUTIONS 5

INSTALLATION INSTRUCTIONS 8

WIRING DIAGRAM 11

OPERATING YOUR RADIO

BASIC OPERATION 15

TONE CONTROLS 18

SYSTEM SETTINGS 20

USB/APPLE DEVICE INSTRUCTIONS 25

BLUETOOTH®INSTRUCTIONS 27

SIRIUSXM®INSTRUCTIONS 29

TROUBLESHOOTING 33

FREQUENTLY ASKED QUESTIONS 35

SPECIFICATIONS 38

LIMITED WARRANTY 39

REPLACEMENT PARTS 40

INSTALLATION NOTES 41

LICENSING

For clarity in identifying your model of iPod, please see Apple’s document

“Identifying iPod®models” at http://support.apple.com/kb/HT1353.

“Made for iPod®” and “Made for iPhone®” mean that an electronics accessory has been

designed to connect specically to iPod®or iPhone® respectively, and has been certied by the

developer to meet Apple performance standards. Apple is not responsible the operation of this

device or its compliance with safety and regulatory standards. Please note that the use of this

accessory with iPod®or iPhone®may affect wireless performance. Apple is not responsible for the

operation of the device or its compliance with safety and regulatory standards.

iPod®and iPhone®are trademarks of Apple Inc., registered in the U.S. and other countries.

Windows Media®and the windows logo are trademarks, or registered trademarks of Microsoft

Corporation in the United States and/or other countries.

The Bluetooth®word mark and logos are owned by the Bluetooth®SIG, Inc., and any use of such

marks by Retro Manufacturing, LLC are under license. Other trademarks and trade names are

those of their respective owners.

Made for iPod®

(Correct function of earlier versions

cannot be guaranteed.)

• iPod Touch (5th generation): Ver. 9.3.5

• iPod Touch (4th generation): Ver. 6.1.2

• iPod Touch (3rd generation): Ver. 5.1

• iPod Touch (2nd generation): Ver. 4.2.1

• iPod Nano (6th generation): Ver. 1.1

• iPod Nano (5th generation): Ver. 1.0.2

• iPod Nano (4th generation): Ver. 1.0.4

• iPod Nano (3rd generation): Ver. 1.1.3

• iPod Classic (160 GB) (Late 2009): Ver. 2.0.4

• iPod Classic (120 GB): Ver. 2.0.1

• iPod Classic (80 GB, 160 GB): Ver. 1.1.2

Made for iPhone®

(Correct function of earlier versions

cannot be guaranteed.)

• iPhone SE: Ver. 10.1.1

• iPhone 6s Plus: Ver. 10.1.1

• iPhone 6s: Ver. 10.1.1

• iPhone 6 Plus: Ver 10.1.1

• iPhone 6: Ver. 10.1.1

• iPhone 5s: Ver. 10.1.1

• iPhone 5: Ver. 10.1.1

• iPhone 4s: Ver. 9.3.5

• iPhone 4: Ver. 7.1.2

• iPhone 3Gs: Ver. 6.1.6

• iPhone 3G: Ver. 4.2.1

WELCOME

Thank you for purchasing a RetroSound® Apache radio. Apache has

the advanced features you expect from a modern car stereo.

General Features

• The only classic car radio compatible with iPod®and iPhone® (Motor 4, 6)

• Built-in Bluetooth®for hands-free calling and audio streaming

• Plays MP3, WMA, and FLAC les via USB input

• Selectable 32,000 color LCD illumination with user presets

• AM/FM tuner with 30 presets and RDS (RDS available Motor 4, 6, 7)

• DAB/DAB+ Tuner (Motor 6, 7)

• Selectable USA/EU/JAP/AUS/RUS tuner frequencies

• Built-in amplier (25 true watts RMS/45 true watts peak x 4 channels)

• 3 EQ presets plus user-controlled bass, mid-range,

treble, fader, and balance adjustment

• InniMount shaft/bracket system for maximum installation exibility

• Available with period-correct knobs and bezel

• Inputs: 2 (1) rear-mounted standard USB ports and 2 rear auxiliary inputs (Motor 2, 7)

• Outputs: 6-channel (4-Channel) pre-amp outputs (front, rear, subwoofer)(Motor 2, 7)

• Separate power antenna and amplier turn-on lead(s)

• Warranty Pending

The information enclosed in this user’s manual is to be used as a guide to assist

you with installation and operation of your radio. This guide does not cover

every installation possibility, vehicle, or every aspect of the installation process.

Retro Manufacturing, LLC, RetroSound®, or its subsidiaries, assume no

responsibility for any installation. This manual may be updated from time to time.

Visit our website for the latest updates: www.retromanufacturing.com.

The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG,

Inc. and any use of such marks by Retro Manufacturing, LLC is under license.

iPod®and iPhone®, are trademarks of Apple Inc., registered in the U.S. and other countries.

WHAT’S IN THE BOX

The items shown below are packaged with your Motor box.

The items shown below are packaged with your radio face box.

Main Wiring Harness

(plugs into back of radio)

Power and Speaker

Wiring Harnesses

(both plug into

Main Wiring Harness)

Motor 4 Radio Body Bluetooth

Microphone

Radio Face

Shaft Mounting Hardware

Radio Face

Mounting Screws

Shafts

InniMount Brackets

Metal Mounting Back Strap

and Hardware

Plastic Washer Kit Bracket Mounting Hardware

PRECAUTIONS

PLEASE OBSERVE THESE PRECAUTIONS WHEN INSTALLING

AND USING THIS UNIT:

This user’s manual does not cover all possible installation scenarios.

If you feel you can’t install this unit yourself, take it to a local car

audio professional. If you have questions about installing your

radio, contact us at [email protected]

or by calling 888.325.1555.

• Do not disassemble or modify the unit or attempt to

repair the unit yourself. If the unit needs to be repaired,

consult your dealer or Retro Manufacturing, LLC.

• Do not use the unit when it is out of order. If the unit is out of

order or is in an abnormal state (has foreign objects in it, is

exposed to water, smokes or smells), turn it off immediately

and consult your dealer or Retro Manufacturing, LLC.

• Refer fuse replacement to qualied service personnel.

When the fuse fails, eliminate the cause and have it

replaced by a qualied service technician with the fuse

prescribed for this unit. Incorrect replacement of the fuse

may lead to smoke, re and damage to the unit.

• If the unit does not turn on, check the connections rst.

Then check the fuse in your vehicle’s fuse panel and the

fuse at the unit’s wiring harness. Do not expose the unit to

direct sunlight or excessive heat. Excessive heat will raise the

interior temperature of the unit, which may damage it.

• Do not use the unit where it is exposed to moisture or

dust. Exposure of the unit to moisture or dust may lead

to smoke, re or other damage to the unit and will void

your warranty. Make sure the unit does not get wet

in car washes or on rainy days. Exposure to moisture

PRECAUTIONS

• Refer wiring and installation to qualied service personnel.

Installation of this unit requires special skills and experience.

Retro Manufacturing, LLC is not liable for any problems resulting

from improper installation of the unit. Please be sure to follow

the instructions carefully while attempting installation.

• Follow the instructions to wire the unit. Failure to follow the

instructions could cause damage to the unit, re, injury or death.

• Be careful not to damage the leads. Prevent them from

being caught in the vehicle chassis or from being damaged

by screws or moving parts such as seat rails. Do not scratch,

pull, bend or twist the leads. Do not install them near heat

sources or place heavy objects on them. If the wiring must

be routed around sharp metal edges, protect them by

wrapping them with vinyl tape or similar protections.

NOTE: Cutting the main wiring harness, antenna lead,

USB or auxiliary cables will void the warranty of your radio.

• We recommend only using the designated parts and

tools when installing this unit. If mounting the radio face

or body remotely, use extreme caution not to damage

internal parts when choosing brackets and screws.

• Do not interfere with safety-related vehicle components.

Do not wire or afx this unit to the fuel tank, brakes,

suspension, steering wheel, pedals, etc. Check for electric

wiring, piping and other items before installing the unit.

• Never install the unit in a location where it

interferes with your eld of vision.

• Use the supplied metal backstrap to secure the rear

of the unit. Failure to secure the back of the unit will

damage the shafts and void your warranty.

PRECAUTIONS

• Never splice into the power lead to supply

other equipment with power.

• After installation and wiring, always check the normal

operation of other electrical equipment.

• Make sure that no wires interfere with driving

or getting in and out of the vehicle.

• Insulate all exposed wires to prevent short-circuiting or electric shock.

• Do not operate the unit for prolonged periods

with the engine off. Prolonged operation with the

engine turned off will drain the battery.

• Keep the volume of your radio at a level that allows

you to hear outside noises such as emergency sirens

and train crossing warnings. Prolonged exposure to

high volume levels may also result in hearing loss.

• This unit requires 12 volts to both the red and yellow power leads.

The unit will not work without 12 volts to both of these leads.

• Always disconnect the negative (-) battery cable before

beginning installation. Verify the battery ground by checking

that one wire is connected to the vehicle’s starter mounting

bolt or engine block and the other to the vehicle’s chassis using

at least 8 gauge wire. Make sure the alternator or generator

connections are secure and free from corrosion, rust or dirt.

• This unit is designed for operation with a negative ground

12 volt DC battery system. Do not operate this unit with

other battery systems, especially an 18 or 24 volt DC or a

positive ground system. If you have a 6 volt system, you

need to either convert to 12 volt DC or purchase a separate

inverter that would increase the voltage to 12 volts.

NOTE: The inverter needs to be rated at 10 amps or higher

in order for the radio to operate properly.

STEP 1: Install the Radio Face

Plug the ribbon cable included with the Motor radio body into

the radio face. After plugging in the radio face, attach it to the

radio body (if it is not already attached) and tighten with the

four radio face mounting screws provided in the radio face box.

The RetroSound®logo on the Motor radio body should be facing

upwards. Take care to not install the face to the body upside down.

NOTE: Optionally, the radio face can be mounted remotely up to nine feet away

from the Motor radio body using an optional Face to Body Extension Cable (sold

separately). In some installation applications, a bracket (not included) can be used

to mount the radio face to the radio body at an angle.

INSTALLATION INSTRUCTIONS

Figure 1 - Removing the Radio Face

Radio Face

Face Mounting

Screws

INSTALLATION INSTRUCTIONS

STEP 2: Install InfiniMount Brackets

Attach each InniMount bracket to the correct side of the radio

using the supplied screws. Before tightening the screws, you need

to adjust the brackets up, down, forward or backward. You may

also rotate, cut, or bend the brackets to achieve the perfect t

(See Figure 2). Complete the assembly with at least two screws

tightened on each side.

NOTE: In some installations the brackets must be moved far enough forward or

backwards or rotated so that only two screws will align with the threaded screw holes

on the radio. Two screws are sufcient to hold the brackets in place.

NOTE: You may need to cut, trim or bend the brackets to achieve a perfect t. You

can even drill new mounting holes into the bracket if you need to. The InniMount

system is designed to be modied. Modifying your brackets will NOT void your warranty.

Figure 2 - Attach InniMount Brackets

Andere Handbücher für Apache

Inhaltsverzeichnis

Andere RetroSound Autoempfänger Handbücher

RetroSound

RetroSound MOTOR 2B Bedienungsanleitung

RetroSound

RetroSound MOTOR4 Bedienungsanleitung

RetroSound

RetroSound TWO Bedienungsanleitung

RetroSound

RetroSound One B/C Kurzanleitung

RetroSound

RetroSound Retro Classic Bedienungsanleitung

RetroSound

RetroSound Zuma Radio Montageanleitung

RetroSound

RetroSound Zuma Radio Montageanleitung

RetroSound

RetroSound Newport Radio Bedienungsanleitung

RetroSound

RetroSound Zuma Radio Montageanleitung

RetroSound

RetroSound Redondo RT Bedienungsanleitung

RetroSound

RetroSound Apache Montageanleitung

RetroSound

RetroSound Retro Classic RC900C Kurzanleitung

RetroSound

RetroSound TWO Bedienungsanleitung

RetroSound

RetroSound Apache Montageanleitung

RetroSound

RetroSound Motor 6 Bedienungsanleitung

RetroSound

RetroSound TWO Bedienungsanleitung

RetroSound

RetroSound RetroRadio Apache Bedienungsanleitung

RetroSound

RetroSound Model One B Kurzanleitung

RetroSound

RetroSound TWO Bedienungsanleitung

RetroSound

RetroSound Zuma Radio Montageanleitung

RetroSound

RetroSound Newport Radio Montageanleitung

RetroSound

RetroSound Motor 1A Bedienungsanleitung

RetroSound

RetroSound Zuma Radio Montageanleitung

RetroSound

RetroSound Retro Classic Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

JVC

JVC KD-AHD69 Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung