REVCAMUK MON16 Bedienungsanleitung
1
Instructions for our MON16/MON17
monitors as used in our premium
PM60 and PM70 series Kits
Our MON16 and MON17 are made by the same factory and share the
same menu system. We have wrien this guide to help navigate
some of the opons inside the menu system.
Please be aware that some of the menu systems are subject to
change (if you noce anything that diers then please let us know so
we can keep these instrucons up to date).
Please keep this guide handy incase you ever nd someone has been
playing with your monitor and changed all the sengs.
2
Technical Specicaons
7” Colour LCD screen
Audio Output: 0.5W (requires camera with microphone)
Loudspeaker: one 15x40mm round loudspeaker
Power supply: 12V/24V
Power Consumpon: Approx. 4W (with no cameras aached to 6W with two cameras)
Digital Screen Resoluon: 800 x3(RGB)x480
Contrast: 500:1
Brightness: 400cd/m2
Viewing Angle: U: 50 degrees/ D: 60 degrees, R/L: 70 degrees
Operang Temperature: -10C to +65C
Storage Temperature: -30C to +80C RH90%
2 Inputs
PAL/NTSC/AUTO
Rotaon/Mirror on both channels
Full funcon Remote Control
Fixed Sunshade MON16, Removable Sunshade MON17
Wiring Harness Layout
3
Connecng the monitor to wiring harness
Please be careful when inserng
the connecon from the
monitor to the wiring harness.
We get about 2 or 3 people a
year phone us up for a
replacement wiring harness as
they bent the pins aer not
nocing the arrows that need to be lined up before pushing together.
Buon Layout
Both monitors have touch sensive buons as opposed to physical push in buons. We nd
these really responsive and easy to use. We have included a quick guide below to what each
of the buons do.
MON16 Buons:
MON17 Buons:
- or ⯆ = Down
+ or ⯆ = Up
Men/Menu = Menu/Enter
Cam = Change Channel
Mod/Mode = Mode (various picture sengs)
Pow/ = Power On/O
4
How to use the Menu System
The menu system is easy to
navigate through with the rst
three buons on the monitor.
To enter the menu system press
the Men/Menu buon. You will
now see the opons in the
photo to the right.
Press the - or ⯆ buon to move
down unl your selecon is over
the required funcon you wish
to modify. To enter the sub
menu/funcon press Men/
Menu buon (this works as an
enter buon as well as menu
buon). Pressing + or ⯆ will
move the selecon up at any
me.
Picture Sub Menu
Scoll to required opon and press menu buon to enter /modify required opon.
Brightness : Adjust the brightness of the picture
Contrast : Adjust the contrast of the picture
Colour : Adjust the colour of the picture
Reset : Resets values to default
Return : Returns to main menu
Exit : Exits menu completely
Volume Funcon
If your camera has a microphone (most of ours don’t) then using this funcon can increase or
decrease the volume of the speaker.
Language Sub Menu
Select from the following opons, these are in order should someone have changed for you
already.
English, French, German, Spanish, Portugese, Italian, Dutch, Return, Exit.
5
Mirroring Sub Menu
This funcon will only be used by a few people in rare circumstances, 99% of our customers
can ignore it.
If for example you have a camera you wish to cancel mirror image on to use as a camera
looking to the side as an emerging from juncon camera you can use this menu to do so.
1. Exit the menu system and select the camera you wish to modify using CAM buon.
2. Enter the main menu, arrow down to mirroring and press menu to enter.
3. Select the channel number of the camera you wish to modify.
4. As default the opon is set to o, change this to the opon you require. The
opons are : OFF, V = Vercal ip will turn the picture upside down, HV = Horizontal
and Vercal ip will turn the picture upside down and mirror that image with the
horizontal rotaon, H = Horizontal ip this will mirror the image.
5. In our example we would have changed our camera to H, as this will mirror the
picture (almost all of our cameras are mirror imaged as standard so mirroring this
mirror image will turn it back in to a normal view image.
Video Sub Menu
As standard we recommend that you use Auto, which will auto detect the video type of the
camera. The opons are PAL/NTSC/AUTO. Selecng the wrong type would mean you get a
black and white picture or no picture.
Opon Sub Menu
Allows you to select picture mode and aspect rao (16:9/4:3), this is usually le alone and
picture mode can be changed when not in menu by pressing the mode buon.
Imperial Funcon
Pressing this will allow you to use either M for metres or F for feet. This only really applies
if you are using guidelines on the monitor.
Park Setup (Guidelines)
The monitor can add guidelines to the picture when the trigger wire has power (ie when
reverse is selected). If we wish to have guidelines then before connuing ensure your
camera is plugged in to Channel 2 (Black input) and the green trigger wire is connected to
the reverse light feed. The monitor should now trigger on and o everyme you go in to
and out of reverse.
Enter this menu and set LINE 2 to ON.
Now enter Line 2 Setup.
6
The rst adjustment will allow you to move the batch of guidelines along the vercal axis,
the image below shows the max adjustment up and down of the guidelines.
Tip: We nd holding the up or down buon will move it quicker than pressing individually
lots of mes.
When you are happy with the adjustment press Men(u) to take you to adjust the width of
the guideline box ie the Horizontal adjustment. See the picture below for min max
horizontal adjustment.
To adjust the values on the lines, go back to the main park setup menu and enter the line
number menu. To modify values use the up and down keys to change the number to the
required value and the Menu buon to go to the next number to adjust.
Interval Cong Sub Menu
This monitor can be setup to switch between two cameras automacally on a pre-assigned
number of seconds per camera. This menu system will allow you to do so. Enter the menu
and you will have CAM1 and CAM2 listed. You can change either channel from 1 to 30
seconds. So if you wanted CAM1 on for 30 seconds then just a quick view of CAM2 for 3
seconds you would set CAM1 to 30 and CAM2 to 3.
To see the interval change in acon, exit the menu system.
Now press the Menu buon for a few seconds unl you see the word “Interval” pop up in
green on the top of the screen, this should now change channels to the mings set in the
interval cong sub menu.
7
Cam Delay Sub Menu
Changing the me for channel 2 will mean the monitor stays on this channel for however
many seconds you set (1-20) aer the trigger wire no longer has power. This is useful for
people who don’t want the monitor to switch on/o when making small back and forth
parking manoeuvres or where channel 2 is a side camera and the trigger wire is aached to
the indicator light and would require a me delay to ensure the picture doesn’t ash on and
o with the indicator light.
Mode Buon
This buon can be pressed whenever you wish to quickly change the picture sengs for the
monitor. There are 4 modes:
Standard : Recommended for most of the me
So : Recommended for night me driving
Vivid : Bright with high contrast
Light : Brightest picture for very bright condions
CAM buon
This buon will change channel between the two available inputs. If you have no camera in
one of the inputs you will get a blue screen come up with the words “no signal” wrien on it.
MON16 Standard Buery Mount
When using the standard mount, there is only one
posion you can secure the monitor. See the photo to
the right to see the indentaon made to allow for the
length of the bolt to secure to the square washer.
If you posion the bolt in to the wrong part of the
channel then the monitor won’t ghten suciently and
could damage the plasc back of the monitor.
See the back page for details of other brackets available
from our site.
Our other brackets allow more adjustment and don’t
require lining up to this indentaon.
8
Oponal Brackets for both monitors
Both monitors have rear channels to allow for alternave brackets.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere REVCAMUK Monitor Handbücher
