Revolabs Fusion Bedienungsanleitung

Rev 1.12

Revolabs Fusion™ Wireless

Microphone System

Set-Up Guide

8-Microphone System

01-8FUSION(EU)-NM (No microphones)

01-8FUSION(EU)-62 (6 omni tabletops/2 wearable)

4- Microphone System

01-4FUSION(EU)-NM (No microphones)

Part Numbers Covered in This Document:

Contents of Box 4

Details About the Fusion 5

Fusion Front Panel 5

Fusion Back Panel 6

Fusion Set-Up 7

Audio-Conferencing 8

Video-conferencing Configuration 8

Pairing Microphones to Fusion Base Station 9

Polycom Installation 12

Tandberg Installation 14

Lifesize Installation 15

Sony Installation 16

Programming Port DIP Switches 18

Multiple Fusion Systems 19

Tabletop Master Mute 20

Auto Phone Answer 21

Remote IR Sensor 22

Hearing Assistance 23

Indicator Lights 24

Safety and Regulatory Information 26

Specifications 30

Warranty 31

Configuring Fusion with Video-conferencing Stations 11

Page 2

Table of Contents

Revolabs Fusion™

Page 3

Great audio, wireless mobility, and simple to install!

Simply plug the cable into the AV system or phone system and it

works. No software configuration is necessary. Even the Fusion

box is designed to be easy to use– vertically or horizontally. No

equipment rack needed. Just set the Fusion system on the

credenza.

Video Conferencing

Revolabs Fusion Wireless Microphone Solution is compatible with

all of the major video-conferencing solutions, including Lifesize,

Polycom, Sony, and Tandberg. It includes a remote control to

control the sound volume. Decide on where you want to put the

Fusion system, whether you want to place it vertically or

horizontally, plug in the cables and you are ready to have great

wireless audio in any conference room.

Audio Conferencing

Plug the Fusion Wireless Microphone Solution into an analog

telephone jack and you are on your way to great wireless

teleconference calls. There is a remote control dialer to dial the

conference phone number. You may connect to powered speakers,

connect to existing speaker system or connect to a new room

speaker system to hear the call. Decide on where you want to put

the Fusion system, whether you want it vertical or horizontal, plug

in the cables and you are ready to have great wireless audio in any

conference room.

Flexible

The Fusion System supports any combination of Solo Wireless

Microphones- Wearable, Tabletop, or XLR adapter for a handheld

microphone. Choose the right microphone for your meeting

dynamics.

Rechargeable

Revolabs Wireless Microphones have a rechargeable battery that

provides up to eight hours of talk time after each full charge.

Revolabs Wireless Microphones recharge to 85% capacity in

approximately 45 minutes.

Secure

All of Revolabs Wireless Microphones use 128-bit authentication,

so that no one can listen in.

Contents of box:

Fusion Base Station and four or eight wireless microphones (any type)

Optional boxes:

Four or eight wireless microphones, Remote IR Sensor, speakers

Cable A

Speakers

Cable B

Phone Cable

Cable C

RCA

Cable D

XLR

Set-Up Guide

Page 4

AC power adapter for Base Station

Charger Base and

AC wall adapter for Charger Base

Remote Control

Fusion Base Station vertical stand

Details about the Fusion

Fusion Front Panel

The Revolabs Fusion Base Station, shown below in front and rear panel

views, manages wireless audio signal processing, and pairing between the Solo

microphones and the Fusion Base Station.

1. IR Remote receiver (if not in sight range of remote, page 22)

2. LED indicators: Displays microphone mute and pairing states

3. Pairing Push Buttons: For pairing microphones to Base

Station (page 9)

4. Power On LED/Volume indicator

Page 5

Revolabs Fusion™

Page 6

Fusion Back Panel

1. Power

2. 6 RCA Plugs

 AUX IN (for auxiliary input devices)

 AUX OUT

 RECORD OUT (for audio recording devices)

 ROOM OUT

 CONFERENCE IN

 CONFERENCE OUT

3. Conference Out XLR (Microphone level)

4. Network RJ 45 (Revolabs use only)

5. Telephone Line-in RJ11

6. Telephone Set-in RJ11

7. Audio Control RJ45 (Revolabs use only)

8. Programming Port: LEFT DIP Switches 1-8 (refer to page 18)

9. Programming Port: RIGHT DIP Switches 1-8 (Revolabs Use Only)

10. DB9 (Revolabs use only)

11. IR Remote DB9

Set-Up Guide

Revolabs Fusion™

Page 7

STEP 1: Fusion Set-Up

Hardware

Decide if want to place Fusion Base Station horizontally or vertically on a flat

surface. To set-up vertically, place the Fusion Base Station vertical stand on the

bottom of the Fusion unit. Tighten bolt into Fusion Base Station.

Fusion Base Station Placement

WARNING: Do not put Fusion Base Station behind metal doors.

If you are putting the Fusion Base Station into a cabinet with non-metal doors,

you need to use the Remote IR Sensor (part number 07-IRREMO-01) for

remote to work. (Refer to page 22)

Power

Plug AC power adapter power cord into the back of the Fusion Base Station and

into wall outlet.

Plug AC wall adapter into the power outlet and the other end into the

microphone Charger Base.

Place wireless microphones in the Charger Base, let charge overnight or at least

eight hours.

Indicator lights on the Base Station Charger Base and microphones should be lit,

verifying all units are operating.

NOTE: Wait (approximately 30 seconds) until the Fusion Base Station has

powered up and the status lights have stopped flashing, before continuing on

with next steps,

Set-Up Guide

STEP 2: Audio Conferencing

Plug Cable A (single RCA to double RCA) single RCA connector into Fusion

Base Station <Room Out> RCA port, and then plug the double RCA

connectors into the powered speakers or a powered amplifier. Plug speakers

into wall outlet.

Plug one end of Cable B, the phone line cable, into the Fusion Base Station

<Line In>, plug other end into phone jack. You may also plug a phone into the

RJ11 <Set In>, You may then dial with the remote control or the phone.

If you ordered 01-8FUSION(EU)-62 6 omni tabletops/2 wearable

microphones or 01-4FUSION(EU)-31 3 omni tabletops/1 wearable

microphone. You are all set to go! Take out the Wireless Microphones,

unmute them by pressing the mute button on the microphone and the system

is ready for a conference!

If you selected your microphones separately with the 01-8FUSION(EU)-NM

or 01-4FUSION(EU)-NM Fusion part numbers, you must first establish a

connection between your microphones to the Fusion Base Station. This is

called “pairing”. Refer to page 9.

STEP 2: Video Conferencing

You must have the audio output going from the Fusion Base station directly to

the speakers used by the video-conferencing station. Plug Cable A (single RCA

to double RCA) single RCA connector into Fusion Base Station <Room Out>

RCA port and then plug the double RCA connectors into the speakers or

monitor.

Once you have configured your video-conferencing station as shown on pages

11-17, then:

If you ordered 01-8FUSION-62 6 omni tabletops/2 wearable microphones or

01-4FUSION-31 3 omni tabletops/1 wearable microphone. You are all set to

go! Take out the Wireless Microphones, unmute them by pressing the mute

button on the microphone and the system is ready for a conference!

If you selected your microphones separately with the 01-8FUSION-NM or 01

-4FUSION-NM Fusion part numbers, you must first establish a connection

between your microphones to the Fusion Base Station. This is called “pairing”.

Refer to page 9.

Page 8

STEP 3: Pairing Microphones to Fusion

Base Station if Necessary

If you selected your microphones separately with the 01-8FUSION(EU)-NM or

01-4FUSION(EU)-NM Fusion part numbers, you must first establish a

connection between your microphones to the Fusion Base Station. This is

called “pairing”.

Pairing creates a link with a unique electronic serial number between the Solo

wireless microphone and the Fusion Base Station. When the microphone and

Base Station have been previously paired, the microphone will automatically try

to connect to the Base Station whenever it is lifted from the Charger Base.

Note: Microphones in new systems must be paired to the Base Station

with each microphone assigned to a unique channel on the base unit.

Remember, microphones are always muted (flashing RED LED light) when they

are removed from the Charger Base and the MUTE button needs to be pressed

to make it “live” (flashing GREEN LED).

A microphone that is not paired will be indicated by either cycling RED-GREEN,

or RED-YELLOW-GREEN LED patterns. A Base Station LED that is not paired

to a microphone will not show any activity on the LED (make sure unit is first

powered on by observing GREEN power LED on the front panel).

When the microphone and Fusion Base Station are paired, both microphone

and channel LEDs will flash RED as microphones are removed from the Charger

Base and flash GREEN when un-muted.

To pair the microphone to the Fusion Base Station:

Turn the microphone OFF (no LED activity). If the microphone is ON, press

and hold the MUTE button for 10 seconds until the LED turns solid RED (do

not release when you hear two beeps). Release the button to turn the unit off.

(Continued on next page.)

Page 9

Revolabs Fusion™

Page 10

STEP 3 Continued: Pairing Microphones to

Fusion Base Station if Necessary

Place the microphone unit into pairing mode by holding the MUTE button down

for seven seconds. The LED will turn solid RED. Release the MUTE button. The

microphone is now in pairing mode.

Within one minute, push and hold the button for the desired channel on the

Base Station (refer to page 5) for seven seconds to enter into pairing mode then

release. The LED for that channel will be solid red until pairing starts, as

indicated by a quick GREEN flash, then switching to flashing RED on both the

microphone and the Base Station (muted audio). Pairing is now complete.

The Fusion Base Station has four or eight indicator LED lights (one for each

microphone) and pairing push buttons on the front panel. When the LED is

flashing GREEN or RED, that channel is active and connected to a wireless

microphone (GREEN is for live audio, RED is for muted). When the LED is OFF,

the channel is inactive (the microphone is out of range or turned off).

Set-Up Guide

Andere Handbücher für Fusion

Inhaltsverzeichnis

Andere Revolabs Mikrofonsystem Handbücher

Revolabs

Revolabs Executive Elite 2 Betriebsanleitung

Revolabs

Revolabs xTag Gebrauchsanweisung

Revolabs

Revolabs VSX7000s Bedienungsanleitung

Revolabs

Revolabs xTag 02-DSKSYS-D Betriebsanleitung

Revolabs

Revolabs Fusion Bedienungsanleitung

Revolabs

Revolabs SOLO EXECUTIVE 01-EXESYS Bedienungsanleitung

Revolabs

Revolabs 02-HDSGL Bedienungsanleitung

Revolabs

Revolabs 01-HDVENU Bedienungsanleitung

Revolabs

Revolabs 01-4FUSIONEU-NM Bedienungsanleitung

Revolabs

Revolabs 03-HDEXEC4EU Betriebsanleitung

Revolabs

Revolabs 01-HDEXEC-NM Betriebsanleitung

Revolabs

Revolabs 02-HDSGL Bedienungsanleitung

Revolabs

Revolabs Executive Elite 01-ELITEEXEC8 Betriebsanleitung

Revolabs

Revolabs REVOLABS SOLO 02-DSKSYS Bedienungsanleitung

Revolabs

Revolabs Executive Elite 03-ELITEEXEC8-AU Betriebsanleitung

Revolabs

Revolabs xTag 02-DSKSYS-D Betriebsanleitung

Revolabs

Revolabs Fusion Bedienungsanleitung

Revolabs

Revolabs 01-HDEXEC4-NM Betriebsanleitung

Revolabs

Revolabs Fusion Bedienungsanleitung

Revolabs

Revolabs Single Channel System Bedienungsanleitung

Revolabs

Revolabs Fusion Montage- und Bedienungsanleitung

Beliebte Mikrofonsystem Handbücher anderer Marken

Paso

Paso R824 Bedienungsanleitung

Naxa

Naxa NAM-982 Bedienungsanleitung

Motorola

Motorola PMNN4461 Bedienungsanleitung

Xvive

Xvive U3 Bedienungsanleitung

Tekon

Tekon DUOS Bedienungsanleitung

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Bedienungsanleitung

Devine

Devine WMD-IE Bedienungsanleitung

LG LF-D7150 Bedienungsanleitung

GE S768DAV Bedienungsanleitung

LD U305 HBH 2 Bedienungsanleitung

Chainway

Chainway URA8 Bedienungsanleitung

ORATOR

ORATOR D860TD Bedienungsanleitung

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Bedienungsanleitung

Alpha Technologies

Alpha Technologies RBMS Bedienungsanleitung

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Bedienungsanleitung

Shure

Shure UA844 Bedienungsanleitung

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Bedienungsanleitung

Pyle

Pyle PDWM5000 Bedienungsanleitung