Rexel AUTO+ 100M Bedienungsanleitung

start here

démarrez ici

starten sie hier

iniziare qui

begin hier

empieza aquí

comece aqui

buradan başlayın

ξεκινήστε εδώ

start her

aloita tästä

start her

börja här

rozpocznij tutaj

začněte zde

kezdés itt

начинать здесь

SHREDDERS

AUTO+100X&100M™

2min

MAX

GB instruction manual 6

F manuel d’utilisation 12

D bedienungsanleitung 18

I manuale d’istruzioni 24

NL gebruiksaanwijzing 30

E manual de instrucciones 36

P manual de instruções 42

TR kullanım kılavuzu 48

GR οδηγίες 54

DK brugsvejledning 60

FI käyttöopas 66

NO bruksanvisning 72

S bruksanvisning 78

PL instrukcja obsługi 84

CZ návod k obsluze 90

H használati útmutató 96

RUS руководствo по зкcплyатации 102

SHREDDERS

AUTO+100X&100M™

6register this product online at www.accobrands.com

autofeed technology

The Auto+ 100X/100M has been designed to automatically shred up to 100 sheets from the auto-

feed chamber and up to 6 sheets through the manual feed slot. The auto-feed mechanism has

been designed to handle paper fastened with staples and paper clips and to only pull a few sheets

of paper into the cutting mechanism to minimise the risk of paper jams.

To guard against injury, the following basic safety precautions must be observed in the set-up of this

product.

• Ensure the machine is plugged into an easily accessible power outlet, and ensure the cable is not

likely to trip up a passer by.

• Any attempt to repair this unit by unqualied personnel will invalidate the warranty. Please return to

supplier.

• Unplug your shredder before moving it or when it is not in use for an extended period of time.

• Do not operate with a damaged power supply cord or plug, after it malfunctions, or after it has been

damaged in any manner.

• Do not overload electrical outlets beyond capacity as this can result in re or electrical shock.

• The socket-outlet should be installed near the equipment and shall be easily accessible.

• Do not alter the attachment plug. The plug is congured for the appropriate electrical supply.

• Do not use near water.

• Do not use aerosol dusters or cleaners.

• Do NOT spray anything into the shredder.

• Do NOT load the autofeed chamber with junk mail, magazines, bound documents etc.

Although this shredder has been designed to comply with UL 60950-1 EN 60950-1 safety standards

including the “probe accessibility tests”, do not operate the shredder near children or pets.

There is a ‘cross shaped’ integral safety device, located on the left of the internal loading bay, which

is designed to prevent the shredder from operating when the loading door is open. You must NOT

under any circumstances tamper with with this switch, add any object into the cross-shaped interlock

switch other than the interlock actuator, as to do so would activate the cutting blades.

AUTO+ 100X&100M™SHREDDERS 7

control panel and indicators

Continuous Jam BoostReverse Auto

warning symbols

This means no aerosols.

This means keep children away

from shredder.

This means you should be careful

because long hair can become

entangled in the cutting head.

This means don’t reach into the

feed opening of the cutting head.

This means be careful of loose

jewellery which could become

entangeld in the cutting head.

This means no oil lubrication,

use Rexel oil sheets only.

This means be careful of ties and

other loose clothing which could

become entangled in the cutting

head.

This means the shredder can

accept small paperclips.

This means the shredder can

accept small staples.

Safety First

Sheet capacity of manual feed

entry slot.

Paper Loading Door/Bin Door

Open or Bin Full indicator –

This means either:

• Loading door is open

• Bin is open

• Bin is full

Paper jam indicator – This means

there is a paper jam in the auto feed

chamber.

If this symbol is ashing the

shredder is attempting to clear a

paper jam automatically.

If this symbol is permanently

illuminated red please follow the

instructions under ‘Rare Occasion

of Jamming’.

Cool Down indicator – This means

the machine is cooling down.

8register this product online at www.accobrands.com

Auto+ 100X/100M shredding capability

Auto+ 100X/100M CAN shred the following:

• 100 sheets

• Stapled paper, 25mm within the corner

• 26/6 and 24/6 or smaller staples

• Small sized paper loaded centrally

• 100 sheets

• Paper clip paper, 25mm within the corner (100M through manual feed slot ONLY)

• Capable of shredding small/medium paper clips (max. wire thickness = 0.9 mm)

• >80/100gsm paper (through manual feed slot ONLY)

• A3 folded in half max. 2 sheets

• 100 sheets

• 80 gsm paper

- A4 - 210mm x 297mm

- A5 - 148mm x 210mm

- A3 single sheet folded in half to make A4

Auto+ 100X/100M CAN shred (through the manual feed slot):

Thick paper or

card.

Multiple folded

sheets (e.g. A3

sheets folded in

half).

Unopened mail

(e.g. junk mail).

Glossy paper or

a sheet covered

with print on both

sides.

Auto+ 100X/100M CANNOT shred the following:

Large clips.

Check the length

of the paperclip

is not longer than

32mm.

Heavy duty

staples. Check

the staple leg

length is not

greater than

6mm.

Bound

documents

Bulldog clips

Magazines or

other documents

bound by multiple

staples or clips.

Adhesive labels.

Plastic sheets,

laminated

documents,

plastic folders.

AUTO+ 100X&100M™SHREDDERS 9

1. operation

1 After unpacking the product, pull out the shredder bin. Remove and t the recyclable paper bag

(as per instructions printed on the bag).

2 Connect the shredder to mains supply.

3 Ensure the on/o button on the back of the machine is in the on position.

4 To commence shredding, press the central Auto button ( ). This will illuminate the blue

standby symbol on the auto button and sets the shredder into auto mode. You are now ready to

shred.

5 Press the loading door button to open the loading door. Load up to 100 sheets at a time into the

feed chamber. Do not ll above the 100 MAX level, this could damage the shredder.

6 Close the loading door without pressing the loading door button. The shredder will now start

automatically.

7 If there is still paper in the Autofeed tray after rst attempt, open and re-close paper loading

door a second time.

8 If you only have up to 6 sheets to shred, you can use the manual feed entry slot, provided the

auto feed chamber is empty.

9 If the shredder is left in auto mode for more than 2 minutes without being used, it will

automatically turn to sleep mode to save power.

10 The shredder will automatically operate from standby mode when paper is inserted into the

manual feed entry slot. Opening either the loading door, empting the bin or pressing any button

will return the product to auto mode.

2. reverse function

1 Should you wish to reverse paper out whilst shredding, a reverse button ( ) has been tted for

your convenience. The jam indicator will illuminate.

2 To resume shredding, turn the shredder on using the ON/OFF switch at the rear of the shredder.

Return the switch to the auto position ( ).

Rexel encourages customers to recycle shredded paper.

Please note that shredded paper cannot be recycled if mixed with credit card shards.

If recycling, please separate shredded paper and credit cards.

3. credit card shredding

Auto+ 100X can shred credit cards, not CDs or DVDs. Switch the shredder to auto mode and insert

the credit card into the opening on top of the manual feed entry slot. Rexel encourages customers

to recycle shredded paper. Please note that shredded paper can not be recycled if mixed with

credit card shards. If recycling, please separate shredded paper and credit cards.

bin or loading door open safety function

As a safety precaution, if the bin or loading door is opened during shredding, the shredder will stop

and the bin full indicator will illuminate ( ).

10 register this product online at www.accobrands.com

over heating

If the Auto+ 100X/100M is used continuously for over 10 minutes the shredder may overheat and

the cool down indicator will ash red ( ). Please allow the shredder to cool down. When the

shredder is ready to be used the thermometer symbol will no longer illuminate. If the shredder

needs to cool down while shredding, no action is needed. The shredder will automatically restart

shredding paper once it has cooled down after periods of continuous use. All you need to do is

ensure paper is loaded into the chamber and the bin is empty when the machine is cooling down.

lubrication of the shredder

Only use Rexel Oil Sheets (2101948 & 2101949) to lubricate. ACCO Brands accepts no liability for

product performance or safety when other types or brands of lubricants are used on any part(s) of

this machine.

service

We recommend these machines are serviced every 6 to 12 months by a Rexel service engineer –

see back of this booklet for the contact details of your local service centre and for enquiries about

maintenance contracts.

4. self-cleaning cutters

After emptying and replacing a full bin, the shredder will run in forward for 4 seconds, stop for

2 seconds and then reverse for 4 seconds to clear away any remaining paper from the cutter

mechanism. This unique ‘self-cleaning’ mechanism is additional jam prevention technology from Rexel.

rare occasions of jamming

If after this auto jam clearance cycle the shredder still has a paper jam, it will stop and the jam

indicator illuminate ( ). Try clearing the jam using the reverse ( ) and continuous jam boost

( ) buttons. If this is unsuccessful, open the loading door, remove the remaining stack of paper,

then pull the jammed paper free of the cutting mechanism.

automatic jam clearance

In the unlikely event of the shredder jamming, the Auto+ 100X and 100M will automatically reverse

and forward the engine three times to clear a jam. During this operation the Paper Jam indicator will

ash ( ).

5. bin full

The shredder will not function when the bin is full and the bin full symbol ( ) is illuminated.

You should empty the bin.

• Pull open the bin slowly to empty.

• Push the empty bin back into place and press the auto button to resume shredding.

6. maintenance

The rollers on the auto-feed mechanism may become dirty over time, please wipe clean with a dry

cloth to maintain maximum product performance.

The auto-start infra-red sensor, located in the paper feed entry-slot, can occasionally become

covered in paper-dust causing the shredder to run despite no paper being fed into the machine.

Switch the shredder o at the rear of the machine and carefully clean the sensor using a cotton-swab.

Andere Handbücher für AUTO+ 100M

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Rexel Aktenvernichter Handbücher

Rexel

Rexel Mercury REM723 Bedienungsanleitung

Rexel

Rexel Mercury REM723 Bedienungsanleitung

Rexel

Rexel AUTO+ 200X Bedienungsanleitung

Rexel

Rexel Mercury RES1523 Bedienungsanleitung

Rexel

Rexel 250 S2 Einrichtungshandbuch

Rexel

Rexel Home Bedienungsanleitung

Rexel

Rexel V-20 Bedienungsanleitung

Rexel

Rexel PROSTYLE STYLE+ Bedienungsanleitung

Rexel

Rexel Secure S5 Bedienungsanleitung

Rexel

Rexel Shredmaster SC170 Bedienungsanleitung

Rexel

Rexel Mercury RDS 2270 Bedienungsanleitung

Rexel

Rexel V-30 Bedienungsanleitung

Rexel

Rexel AUTO+ 600X Bedienungsanleitung

Rexel

Rexel Momentum X410-SL Bedienungsanleitung

Rexel

Rexel Auto+ 60X Bedienungsanleitung

Rexel

Rexel Auto+ 60X Bedienungsanleitung

Rexel

Rexel Mercury RSS1627 Bedienungsanleitung

Rexel

Rexel Mercury RSS2434 Bedienungsanleitung

Rexel

Rexel Mercury RES1223 Bedienungsanleitung

Rexel

Rexel auto+ 300X Bedienungsanleitung

Rexel

Rexel ProStyle Bedienungsanleitung

Rexel

Rexel auto+ 300X Bedienungsanleitung

Rexel

Rexel AUTO+300X Bedienungsanleitung

Rexel

Rexel V60 Bedienungsanleitung

Beliebte Aktenvernichter Handbücher anderer Marken

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung

GBC

GBC ShredMaster CC055 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Martin Yale

Martin Yale 227284S1 Bedienungsanleitung

Bonsaii

Bonsaii DocShred C223-A Bedienungsanleitung

HSM

HSM Pure 740 max Bedienungsanleitung

TRU RED

TRU RED TR-BMC20A Bedienungsanleitung

Fellowes

Fellowes 50S Bedienungsanleitung

GBC

GBC SHREDMASTER 1236SE Bedienungsanleitung

Gude

Gude GH 2600 P Bedienungsanleitung

Ativa

Ativa DQ80M Bedienungsanleitung

Q-Connect

Q-Connect Q8CC Bedienungsanleitung

Fellowes

Fellowes POWERSHRED C-325CI Bedienungsanleitung

Olivetti

Olivetti Privacy 5000C Kurzanleitung

Dahle

Dahle paperSAFE 22022 Bedienungsanleitung

Formax

Formax OnSite FD 87 Bedienungsanleitung

GEHA

GEHA Home & Office S7 CD Bedienungsanleitung

Fellowes

Fellowes Powershred M-3C Bedienungsanleitung