Rexel Auto+ 60X Bedienungsanleitung
start here
démarrez ici
starten sie hier
iniziare qui
begin hier
empieza aquí
comece aqui
buradan balayn
start her
aloita tästä
start her
brja här
rozpocznij tutaj
začněte zde
kezdés itt
SHREDDERS
AUTO+60X™
2min
MAX
1
4
3
5
2
GB instruction manual
F manuel dutilisation
D bedienungsanleitung
I manuale distruzioni
NL gebruiksaanwijzing 30
E manual de instrucciones
P manual de instruçes
TR kullanm klavuzu
GR
DK brugsvejledning
FI käyttopas
NO bruksanvisning
S bruksanvisning
PL instrukcja obsugi
CZ návod k obsluze
H használati tmutat
RUS o cy
SHREDDERS
AUTO+60X
™
GB
6register this product online at www.accobrands.com
To guard against injury the following basic safety precautions must be observed in the setup of this
product.
Ensure the machine is plugged into an easily accessible power outlet and ensure the cable is not
likely to trip up a passer by
Any attempt to repair this unit by unqualied personnel will invalidate the warranty Please return to
supplier
Unplug your shredder before moving it or when it is not in use for an extended period of time
Do NOT operate with a damaged power supply cord or plug after it malfunctions or after it has
been damaged in any manner
Do NOT overload electrical outlets beyond capacity as this can result in re or electrical shock
The socketoutlet should be installed near the equipment and shall be easily accessible
Do NOT alter the attachment plug The plug is congured for the appropriate electrical supply
Do NOT use near water
Do NOT use aerosol dusters or cleaners
Do NOT spray anything into the shredder
Do NOT load the autofeed chamber with unopened junk mail magazines bound documents etc
Although this shredder has been designed to comply with UL EN safety standards
including the probe accessibility tests do not operate the shredder near children or pets
autofeed technology
The Auto X has been designed to automatically shred up to sheets from the autofeed
chamber and up to sheets through the manual feed slot The autofeed mechanism has been
designed to handle paper fastened with staples and paper clips and to only pull a few sheets of
paper into the cutting mechanism to minimise the risk of paper jams
GB
AUTO+ 60X™SHREDDERS 7
control panel and indicators
Continuous Jam Boost
Reverse Auto
warning symbols
This means no aerosols
This means keep children away
from shredder
This means you should be careful
because long hair can become
entangled in the cutting head
This means dont reach into the
feed opening of the cutting head
This means be careful of loose
jewellery which could become
entangeld in the cutting head
This means no oil lubrication
use Rexel oil sheets only
This means be careful of ties and
other loose clothing which could
become entangled in the cutting
head.
This means the shredder can
accept small paperclips
This means the shredder can
accept small staples
Safety First
Sheet capacity of manual feed
entry slot
5
Cool Down indicator – This means
the machine is cooling down
GB
8register this product online at www.accobrands.com
Auto+ 60X shredding capability
Auto+ 60X CAN shred the following:
sheets
Stapled paper mm within the corner
and or smaller staples
Small sized paper loaded centrally
sheets
Paper clip paper mm within the corner
Capable of shredding smallmedium paper clips max wire thickness mm
gsm paper through manual feed slot ONLY
A folded in half max sheets
sheets
gsm paper
A mm x mm
A mm x mm
A single sheet folded in half to make A
Auto+ 60X CAN shred (through the manual feed slot):
Thick paper or
card.
Multiple folded
sheets eg A
sheets folded in
half
Unopened mail
eg junk mail
Glossy paper or
a sheet covered
with print on both
sides.
Auto+ 60X CANNOT shred the following:
Large clips
Check the length
of the paperclip
is not longer than
mm
Heavy duty
staples Check
the staple leg
length is not
greater than
6mm.
Bound
documents
Bulldog clips
Magazines or
other documents
bound by multiple
staples or clips
Adhesive labels
Plastic sheets
laminated
documents
plastic folders
GB
AUTO+ 60X™SHREDDERS 9
1. operation
Unpack the product
Connect the shredder to mains supply
3 Ensure the ono switch on the back of the shredder is in the ON position
To commence shredding move the slide switch to the Auto position which sets the
shredder into auto mode You are now ready to shred
To load the shredder simply lift the loading door catch to open the loading door and insert
documents You can open the door further to degrees for easier access if required Load
up to sheets at a time into the feed chamber Do NOT ll above the MAX level this could
damage the shredder.
6 The shredder will start shredding automatically ONLY after closing the loading door
If there is still paper in the Autofeed tray after rst attempt open and reclose paper loading door
a second time.
If you only have up to sheets to shred you can use the manual feed slot provided the auto
feed chamber is empty
2. reverse function
Should you wish to reverse paper out whilst shredding a reverse button has been tted for
your convenience
Reverse the paper out then turn the shredder o using the ONOFF switch at the rear of the
shredder Remove the paper from the manual feed slot if being used or open the loading door
remove the remaining stack of paper then pull the jammed paper free of the cutting mechanism
3 To resume shredding return the slide switch to the auto position and turn on the machine by
using the ONOFF switch at the rear of the shredder
Rexel encourages customers to recycle shredded paper.
Please note that shredded paper cannot be recycled if mixed with credit card shards.
If recycling, please separate shredded paper and credit cards.
3. credit card shredding
The Auto X can shred credit cards Switch the shredder to auto mode and insert the credit card
between the markings in the manual feed slot Only shred one credit card at a time
GB
10 register this product online at www.accobrands.com
lubrication of the shredder
Only use Rexel Oil Sheets to lubricate ACCO Brands accepts no liability for
product performance or safety when other types or brands of lubricants are used on any parts of
this machine Rexel recommend using an oil sheet after the bin has been emptied three times and
for ongoing three bin cycle thereafter Insert the oil sheet into the manual feed slot and NOT in the
autofeed chamber Using an oil sheet in the autofeed chamber will contaminate the feed rollers
preventing the autofeed mechanism shredding Follow the maintenance instructions if the rollers
become contaminated.
5. maintenance
The rollers on the autofeed mechanism may become dirty over time please wipe clean with a dry
cloth to maintain maximum product performance
service
We recommend these machines are serviced every to months by a Rexel service engineer
see back of this booklet for the contact details of your local service centre and for enquiries about
maintenance contracts.
over heating
If the Auto X is used continuously for over minutes the shredder may overheat and the cool
down indicator will ash red Please allow the shredder to cool down When the shredder is
ready to be used the thermometer symbol will no longer illuminate If the shredder needs to cool
down while shredding no action is needed The shredder will automatically restart shredding paper
once it has cooled down after periods of continuous use All you need to do is ensure paper is
loaded into the chamber and the bin is empty when the machine is cooling down
rare occasions of jamming
In the unlikely event of the shredder jamming the Auto X will stop shredding Check that the bin
is not full then try clearing the jam using the reverse and continuous jam boost switch
then return to Auto mode If this is unsuccessful follow the reverse function instructions
4. bin full
Should the shredder stop shredding the bin may be full Check rst by looking through the viewing
window and if full you should empty the bin
Pull open the bin slowly to empty
Push the empty bin back into place and the machine will resume shredding
bin or loading door open safety function
As a safety precaution if the bin or loading door is opened during shredding the shredder will stop
Andere Handbücher für Auto+ 60X
3
Dieses Handbuch passt für folgende Modelle
10
Inhaltsverzeichnis
Sprachen:
Andere Rexel Aktenvernichter Handbücher
Rexel
Rexel Mercury RDS 2050 Bedienungsanleitung
Rexel
Rexel RLWX25 Bedienungsanleitung
Rexel
Rexel Optimum AutoFeed+ 45X Bedienungsanleitung
Rexel
Rexel Promax QS RSS1838 Bedienungsanleitung
Rexel
Rexel ProStyle Bedienungsanleitung
Rexel
Rexel AUTO+ 100M Bedienungsanleitung
Rexel
Rexel Promax QS REX823 Bedienungsanleitung
Rexel
Rexel Mercury REM723 Bedienungsanleitung
Rexel
Rexel 1400 Bedienungsanleitung
Rexel
Rexel RPX612 Bedienungsanleitung
Rexel
Rexel Secure S5 Bedienungsanleitung
Rexel
Rexel Momentum X406 Bedienungsanleitung
Rexel
Rexel V-20 Bedienungsanleitung
Rexel
Rexel RLWS35 Bedienungsanleitung
Rexel
Rexel AUTO+ 100M Bedienungsanleitung
Rexel
Rexel RLS28 Bedienungsanleitung
Rexel
Rexel Momentum M510 Bedienungsanleitung
Rexel
Rexel Mercury RSS1627 Bedienungsanleitung
Rexel
Rexel AUTO+ 90X Bedienungsanleitung
Rexel
Rexel Mercury RES1523 Bedienungsanleitung
Beliebte Aktenvernichter Handbücher anderer Marken
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung
GBC
GBC ShredMaster CC055 Bedienungsanleitung
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Bedienungsanleitung
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Bedienungsanleitung
Martin Yale
Martin Yale 227284S1 Bedienungsanleitung
Bonsaii
Bonsaii DocShred C223-A Bedienungsanleitung
