Rhaon ICL-R Bedienungsanleitung
Digitally Steerable Line Array Loudspeaker Systems
IC Live
ICL-R & IC215S-R
USERS MANUAL
Version 1.6.4
IC Live Users Manual - Models ICL-R & IC215S-R
2
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions
5. Do not use this apparatus near water. The apparatus shall
liquids, such as vases, shall be placed on it.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety.
-
cian for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Make sure the power cord remains readily accessible at all
times.
12. The AC Power Cord is the AC Mains disconnect.
-
turer.
14. Disconnect this apparatus during lightning storms or when
unused for long periods of time.
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
“WARNING - TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE”
“CAUTION: THESE SERVICING INSTRUCTIONS ARE FOR USE
BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE
RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVIC-
ING OTHER THAN THAT CONTAINED IN THE OPERATING
INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO”.
CAUTION
To reiterate the above warnings: servicing instructions are for
use by qualified personnel only. To avoid electric shock, do
not perform any servicing other than that contained in the Ope-
ration Instructions unless you are qualified to do so. Refer all
servicing to qualified personnel.
Eindrigliche Warnung: Wartungsvorschriften dienen nur der
Benutzung durch qualifizieres Personal. Zur Vermeidung eines
elektrischen Schlages keine anderen als die in den Betriebsvor-
schriften beschriebenen Wartungsarbeiten ausführen, es sei denn
Sie sind dafür qualifiziert. Wartungsarbeiten auszuführen.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the use to the presence of uninsulated
"Dangerous Voltage" within the product's en-
closure that may be of sufficient magnitude
to constitute a risk of electric shock to hu-
mans.
The exclamanation point, within an equilateral
presence of important operating and mainte-
nance (servicing) instructions in the literature
accompanying the product.
VORSICHT
RISK OF ELECTRONIC SHOCK:
OPEN ONLY IF QUALIFIED AS
SERVICE PERSONNEL
GEFAHR EINES ELEKTRISCHEN SCHLAGES:
NUR VON QUALIFIZIEREM WARTUNGSPERSONAL
ZU ÖFFNEN
Der Blitz mit nach untenzielendem Pfeil in
einem gleichseitigen Dreieck weist den
Benutzer auf das Vorhandensein einer
unisolierten, "gefährlichen Spannung" im
Gehäuse hin, die stark genug sein kann, einer
Person einen gefährlichen elektrischen Schlag
zu versetzen.
Das Ausrufezeichen in einem gleichseitigen
Dreieck weist den Benutzer auf wichtige
Betriebs- und Wartungsvorschriften in den
beiliegenden Unterlagen des Gerätes hin.
Erklärung der graphischen SymboleExplanation of Graphical Symbols
IMPORTANT
Your Iconyx Steerable Column Loudspeaker contains no user-serviceable
IC Live Users Manual - Models ICL-R & IC215S-R
3
TABLE OF CONTENTS
Page
Section 1: Basic Operating Instructions
Introduction, Technical Support, General Information 4
Setup & Assembly Instructions 5
Assembly 6
Wiring Diagrams 8
With PC Control 9
Array Input / Power Connections 10
Operation (with no PC) 11
Presets 11
Operation (Computer Controlled) 14
Assigning Digital & Analog Inputs 16
Panel Controls 19
` Section 2: Additional User Information
Initial Setup 22
Computer Requirements 22
Virtual Systems 25
Beam Steering 30
All Loudspeakers / Group Controls 39
Copy Settings / Copy Presets / Reset Control 41
Supervise Mode 42
General Preferences 45
Password Protection 46
Keeping Your RHAON Program Up-To-Date 48
Servicing / Trouble Shooting Hints 54
IC L-R Array 62
Index 66
IC Live Users Manual - Models ICL-R & IC215S-R
4
INTRODUCTION
enjoy it.
Your IC Live digitally steerable column loudspeaker was carefully tested and inspected before leaving our factory and should have arrived
found, immediately notify the shipping company. Only you, the consignee, may institute a claim with the carrier for any damage incurred
and packing material even though the loudspeaker arrived in good condition. If you should ever need to ship the loudspeaker, it should be
shipped in its original factory packaging.
TECHNICAL SUPPORT
-
http://www.renkus-heinz.com/support/request-info/tech-info/i
General Information
and sizes, are easy to transport and setup, and deliver superior sound in a broad spectrum of environments.
Thanks to digitally controlled beam steering they deliver narrow vertical beams of sonic energy that can be directed onto the audience
instead of reverberating off the walls and ceilings. Horizontal coverage is a consistent 150o eliminating the need for left and right setups in
This guide was written to assist you in setting up and operating IC Live systems.
IC Live Users Manual - Models ICL-R & IC215S-R
5
Common Setups
were designed to work together, both acoustically and mechani-
cally with the subwoofer supplying both the extra bass impact
needed by most musical productions and a solid mounting base
for the tall slender columns. Together, the two building blocks
The unique interlocking hardware system with Quik-Release pins
joins the line array and the subwoofer together into a rigid as-
sembly, allowing the subwoofers to be used as mounting bases
for the columns. When used as a mounting base, the subwoof-
ICL-R arrays perform best when their acoustic center, the point
of origination for the narrow acoustic beam, is several feet above
the ear level of the audience. If it’s placed lower, too much of
never reaches those in the rear. If it’s placed much higher, the
narrow vertical beam tends to” light up” the center of the audi-
ence and drop off in both the front and rear.
This puts the ideal height for the bottom of an ICL-R array at
-
subwoofer an ideal arrangement for many setups.
work well when space is available for them on the stage. Mount-
ing two stacked arrays on a single subwoofer is not recommend-
ed, as the assembly is unstable.
Dual subwoofer assemblies combined with either a single ICL-R
array or with two stacked ICL-R arrays are two other popular
-
demanding musical events.
ICL-R and a much higher output level. They are especially
desirable in reverberant rooms where tight control of the beam is
needed to deliver clear speech over a considerable distance.
When only speech is involved and the bass support provided by
the subwoofers is not needed, single or stacked ICL-R arrays
are an ideal solution. They can be attached to the truss work with
Chesebrough clamps or by removing the array’s rear pole/handle
and using the pole clamps to secure the array to the truss.
ICL-R arrays are also equipped with AeroQuip Fly-Track, so they
AeroQuip hardware.
IC Live Users Manual - Models ICL-R & IC215S-R
6
Assembly
IC Live is a building block system designed for easy transportation,
modules:
1.-
ing bars and their short Quik-Release pins from the modules.
2.
module should be turned upside down so the horn sections of the two
modules are together.
3. Align the two modules and then remove the Quik-Release pin from
the upper module’s rear cylinder to allow its inner sleeve to drop
down into the lower module’s rear cylinder.
4. Then re-insert the Quik-Release pin into the upper module’s cylin-
der to lock the inner sleeve in place.
IC Live Users Manual - Models ICL-R & IC215S-R
7
5.
into the channels as shown.
6. Lock the joining bars into place
with the short Quik-Release pins to
complete the physical assembly.
Assembly
exception. The woofer sections of the second and third modules should be joined together. If in doubt, refer to page 62 for proper module
orientation.
Do not attempt to mount a stacked ICL-R array onto a subwoofer standing vertically. The resulting assembly is unstable.
Master / Slave Settings
The next step is to electrically link the modules together and verify
connections should be made to the Master module.
Plug one end of the short CAT5 linking cable into the lower intercon-
upper socket on the upper module. Then plug one end of the short
AC power cable into the looping power socket on the lower module
and the other end into the power socket on the upper module. Follow
the same procedure to connect a third module, if one is provided.
The next step is to set the two dip switches that identify each module.
dip switches shows the proper setting for a Master module (both
future use.
switches, you will need to turn it off or disconnect it at the source and
then reconnect it before the dip switch settings will take effect. When
properly set the digital readouts will both read 20 in a dual array and
30 in a three module array.
Master
IC Live Users Manual - Models ICL-R & IC215S-R
8
Wiring Diagrams For Basic Setups
IC Live arrays were developed for a wide range of different size and types of venues, including even large multi-array events. They include
remotely located computer and multi-channel digital audio distribution.
When remote computer supervision and control is not needed, IC Live arrays can be treated just like any other self-powered loudspeaker.
below.
Single
ICL-R Array Setup
Stacked (Dual)
ICL-R Array Setup
Stacked (Dual)
ICL-R Array
&
Dual IC215S-R Subwoofer
Setup
IC Live Users Manual - Models ICL-R & IC215S-R
9
System Wiring With PC Control
An Ethernet switch is needed only when there are two or more devices, such as an array and a subwoofer. A stacked array is treated as a
single device since it performs as one even though it has two modules.
adequate for most applications. Managed switches are not required.
converter’s output would plug into one of the Ethernet switch ports.
Single
ICL-R Array Setup
with Computer Control
Stacked (Dual)
ICL-R Array Setup
With Computer Control
Stacked (Dual) ICL-R Array
&
Dual IC215S-R Subwoofer Setup
with Computer Control
IC Live Users Manual - Models ICL-R & IC215S-R
10
ICL-R
Control Panel
Array Connections
Looping AC Power Connector
90/260 V AC Power Connector
Primary Ethernet Input Connector
Preset Controls
Operating Controls
Primary Input &
Looping Output
Primary Ethernet Input Connector
IC215S-R
Input / Control Panel
Mute Controls
Level Controls
IC215S-R
Power Control Panel
Power On / Off AC Power Connector
-
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Rhaon Lautsprechersystem Handbücher
Beliebte Lautsprechersystem Handbücher anderer Marken
Sondpex
Sondpex Active Speaker System and Digital Music... Bedienungsanleitung
JVC
JVC NX-PN7 Bedienungsanleitung
Marshall Amplification
Marshall Amplification AR-DM61-BT Bedienungsanleitung
Yamaha
Yamaha NX-A01 - Speaker Sys Bedienungsanleitung
SE Audiotechnik
SE Audiotechnik I-LINE Bedienungsanleitung
Gemini
Gemini WRX-843 Series Bedienungsanleitung