Ricoh THETA Bedienungsanleitung

Configure Ricoh Theta Cameras For ScanPlan

Overview

The ScanPlanTM is compatible with Ricoh Theta panoramic cameras, allowing you to take panoramic images on the fly.

Follow these instructions to prepare your Ricoh Theta camera for use.

Details

To prepare your camera for use, charge your camera. Download the Ricoh Theta app and update the firmware.

Connecting and Charging the Camera

1. Connect the supplied cable to the camera's mini USB connector port.

2. Connect the other end to a USB Port on your computer.

3. When the device is charging, the green LED will be illuminated (not flashing). When the camera is fully charged,

the LED will go off.

Note: Only allow one smart phone to be connected to the camera at a time. If another smartphone has been used

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

with the Theta camera, make sure that phone is NOT set to automatically connect to the camera. It could cause

capture errors.

Downloading the Theta PC program

1. Download the RICOH THETA Setup.exe from https://support.theta360.com/en/download/.

2. Install the program to the default/recommended directory.

3. Run the RICOH THETA app by clicking the start button and scrolling down to RICOH and selecting the RICOH

app, or start typing Ricoh in the search window and then select RICOH THETA.

Updating the Theta Firmware

It is recommended to use a computer to update the firmware as the files are large.

1. With the Theta camera connected, press the power button (top button). The blue LED on the front of the camera

will turn on, and the camera icon will be illuminated.

Note: The green LED may or may not be illuminated during this step, depending on the level of charge in the

Theta.

2. With the RICOH THETA app open, click File.

3. Click Firmware Update.

4. Click OK.

5. The current version and newest version will be shown, update the firmware if necessary.

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

Connecting to the Theta Wi-fi

1. Remove the USB connector from the Theta camera (the Wi-Fi can’t be enabled while it’s connected).

2. Turn on the Theta camera by briefly pressing the power button on the side.

3. LED’s will illuminate and the Wi-Fi icon above the camera icon will be flashing.

4. If the Wi-Fi icon is not flashing, press the 2nd button.

5. The Theta serial number is the default Wi-Fi password. (just the numbers NOT the “YL”).

Note: It is not advised to change the password as there is no password recovery feature.

6. The Theta camera will be visible in the list of available Wi-Fi sources as THETAYLXXXXXXXX.OSC. The X’s will

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

be replaced by the serial number of your specific device.

Theta SmartPhone App Settings

1. Download and Install the Theta Smartphone App through your phone's app store.

2. Open the app and press the gear symbol.

3. The default settings do not need to be changed, but this page can also be used to check the camera battery level.

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

4. Press the Left Arrow at the bottom to return to the previous screen.

5. Press the camera icon.

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

6. Press the lower gear icon to open additional settings.

7. Press Camera Settings.

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

8. Set Sleep Mode to a minimum of 10 minutes, and consider an Auto power off setting of one hour to conserve

battery life.

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

Andere Handbücher für THETA

Inhaltsverzeichnis

Andere Ricoh Digitalkamera Handbücher

Ricoh

Ricoh Caplio R1V Bedienungsanleitung

Ricoh

Ricoh WG-4 GPS Bedienungsanleitung

Ricoh

Ricoh Caplio RR530 Bedienungsanleitung

Ricoh

Ricoh CX3 Bedienungsanleitung

Ricoh

Ricoh WG-M1 Bedienungsanleitung

Ricoh

Ricoh G700SE Bedienungsanleitung

Ricoh

Ricoh R8 Gebrauchs- und Pflegehandbuch

Ricoh

Ricoh GR III Installationsanleitung

Ricoh

Ricoh Caplio R1 Bedienungsanleitung

Ricoh

Ricoh RDC-5000 Bedienungsanleitung

Ricoh

Ricoh CX4 Bedienungsanleitung

Ricoh

Ricoh Pentax K-3 III Installationsanleitung

Ricoh

Ricoh WG-30W Bedienungsanleitung

Ricoh

Ricoh Caplio 500SE Bedienungsanleitung

Ricoh

Ricoh Caplio 400G wide F Bedienungsanleitung

Ricoh

Ricoh R8 Montageanleitung

Ricoh

Ricoh Caplio R6 Bedienungsanleitung

Ricoh

Ricoh RDC-4200 Montageanleitung

Ricoh

Ricoh PENTAX XG-1 Bedienungsanleitung

Ricoh

Ricoh Caplio 500SE Bedienungsanleitung

Ricoh

Ricoh Caplio R7 Bedienungsanleitung

Ricoh

Ricoh Caplio 300G Bedienungsanleitung

Ricoh

Ricoh SLX 500 Bedienungsanleitung

Ricoh

Ricoh HZ15 Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung