Ricoh DDP 184 Bedienungsanleitung

User’s Guide

5 Dedrick Place

West Caldwell, NJ 07006

January 2007

N905342H

No part of this document may be reproduced without the expressed permission of Ricoh

Corporation.

The material in this document is for informational purposes and is subject to change

without notice. Ricoh Corporation assumes no responsibility for errors or omissions in

this document. No liability is assumed for any damages resulting from the use of the

information it contains.

TRADEMARK

Adobe and Postscript are registered trademarks of Adobe Systems Incorporated. PCL

is the trademark of Hewlett Packard. Ethernet is a trademark of Xerox Corporation.

Windows XP is a trademark of Microsoft Corporation. Digital Document Publisher and

DDP and its associated logo mark are the trademarks of Ricoh Corporation. Ricoh and

All other terms and product names may be trademarks or registered trademarks of their

respective owners and are hereby acknowledged.

NOTICE TO USER

In an effort to meet the demands of a rapidly changing technology, the manufacturer is

continually developing new features and functions to meet changing printing or printer

needs. Please be sure to consult all manual updates or addenda when using this

product’s documentation.

This document contains TrueType fonts from Monotype Imaging Inc. Reproduction of

these fonts is prohibited.

The software embedded in this product is based in part on the work of Independent

JPEG Group.

Permission to use, copy, modify, distribute and sell this software and its documentation

for any purpose and without fee is hereby granted, provided that the avove copyright

notice appears in all copies and that both the copyright notice and permission notice

appear in supporting documentation, and the name of CMU not be used in advertising

or publicity pertaining to distribution of the software without specific written prior

permission.

The software embedded in this product uses the software by Sam Leffler and Silicon

Graphics.

Permission to use, copy, modify, distribute and sell this software and its documentation

for any purpose and without fee is hereby granted, provided that the above copyright

notice appear in all copies of the software and related documentation, and (ii) the names

of Sam Leffler and Silicon Graphics may not be used in advertising orpublicity pertaining

to distribution of the software without specific, written prior permission of Sam Leffler and

Silicon Graphics.

Revision Table

Manual Rev. Machine Rev. Page No. Date

00 - First Edition May.2005

01 - 2-10(01), 2-18(01), 2-20(01), 4-5(01), 4-16(01),

4-25(01), 4-26(01), 4-27(01), 4-28(01), 4-29(01),

5-15(01), 6-47(01), Glossary-3(01) Oct.2005

02 -

2-3(01): Added “Note1” for “Sample Tray Output”.

Nov.2005

2-14(00),2-17(01): Added “PCL” into Chapter2

“Operator Control Panel”.

2-16(01)-2-18(01),2-19(02),2-20(01),2-21(02),2-

22(01)-2-25(01): Changed page number for add-

ing of “PCL” into Chapter2 ”Operator Control

Panel”.

5-21(01): Corrected the spelling of “Preserving”.

D-1(01): Added ”a” - “d” beside the figure.

Revised the figure.

D-2(01): Revised the figure.

D-3(01): Clarified the words in the figures.

Revised the figure.

D-5(01): Revised the figure.

D-6(01): Clarified the words in the figures.

D-7(01): Revised the figure.

Deleted “Index”.

03 -

introduction ix(01): Delete "Appendix D" and

"Index".

Apr.2006

1-2(01): Changed the contents of "HCF" and

"Inserter". Delete the contents of "Booklet Fin-

isher". Changed the contents of "MOP".

1-3(01): Added "HCF" in the contents of "High-vol-

ume printing".

1-4(01): Changed the figures.(Changed:"High

Capacity Feeder" , Delete:"Inserter", "Booklet

Tary" , Added:"Finisher Front Cover", "Top Cover")

1-5(01): Changed the Table. (Changed:"High

Capacity Feeder" , Delete:"Inserter", "Booklet

Tary" , Added:"Finisher Front Cover", "Top Cover")

Changed Note. Delete "1.When Booklet •••" in

Note. Added "1.Option" in Note.

1-6(01): Changed the figure. (Added "Fuser

Latch", "Fuser Unit", "Drum Center Lock", "TH

Handle" in the front engine. Added "Top Cover

Latch", "Tonner Hopper Unit", "Developer Duct" in

the rear engine.)

(03) -

1-7(01): Changed the upper figure (Booklet Fin-

isher -> Standard Finisher). Delete "Inserter",

"Booklet Holder", "Folding Unit". Changed the

Table (Delete the row of "Booklet Finisher".

Delete the colum of "Inserter", "Booklet Holder",

"Folding Unit". Changed the description of "Staple

F")

(Apr.2006)

1-8(01): Changed the figure.

1-9(01):Changed the figure. (Delete the "Inserter",

"Booklet Holder".). *Added "Warning".

1-10(01):-Added the figure of "Preserving Param-

eters" with (Note1).

1-11(01): Added the (Note2) on the figure of

"Ready". Added Note.

1-12(01): Changed the figure of "Paper Out

Tray1".

1-13(01):Changed the title (Added IM#XX.)

2-2(01): Changed the figure (Delete "Inserter",

"Booklet Holder".).

2-3(02): Changed the Table (Changed the colum

of "Ten key". Deleted the colum of "Brightness".

Added the colum of "Buzzer volume".).

2-6(01):Changed the explanation for "Using the +

/ - Change Button Menu". Changed the figure of

OCP menu.

2-7(01): Changed the figure of Options menu.

2-8(01): Changed the contents of "Finisher Menu".

2-9(01):Changed the contents of "Consumables".

2-10(02):Changed the Table (Reviewed applica-

tion of "Note x" (x=1,•••••,8). Deleted "Tray Group-

ing" in "Information"-"Printer"-"Front/Rear"-"MBT".

Deleted "Fuser Unit" in "Information"-"Consum-

ables"-"Front/Rear". Changed "Usage" in "Infor-

mation". Deleted "Booklet" in "Information"-

"Finisher". Changed the explanation of "Note 1" -

"Note 8".).

2-11(01): Changed the figure of Printer menu.

2-12(01) : Changed the Table2-2. Deleted "Note".

2-13(01) : Deleted the contents of "Exit Jam

Recovery" in Options. Changed the contents of

"Wait Timeout", "Duplex Always" in Options.

Deleted the contents of "PostScript".

2-15 (02):Changed the Table (Added "HCF" in

"Printer"-"Paper Source"-"Paper Size". Added

"Note 4" - "Note 5".). Added the explanation of

"Note 4"- "Note 5".

Manual Rev. Machine Rev. Page No. Date

(03) -

2-16(02): Changed the Table (Added the row of

"Level 8". Reviewed application of "Note 3".

Changed "Tray Adjust", "Color Control", "Paper

Pattern" in "Printer"-"Paper Source". Deleted "Exit

Jam Recovery" in "Printer"-"Options". Changed

"Wait Timeout", "Detach Voltage", "Laser Power

Adjust", "H Positioning" in "Printer"-"Options".).

Changed the explanation of "Note 3".

(Apr.2006)

2-17(02): Changed the Table (Reviewed applica-

tion of "Note x" (x=1, 2, 3). Changed "Test Print" in

"Printer".)

Changed the explanation of "Note 1" - "Note 3".

2-18(02): Changed the explanation of "OCP".

Changed the explanation of "Network" in "Sys-

tem".

2-19(03): Changed the explanation of "Public R/

W". Added the contents of "Auto Backup Time",

"Output Cascade".

2-20(02): Added (Note1) to "Charger", "Corotron".

*Changed the explanation in "Note".

2-21(03):Changed the Table(Deleted"Brightness"

in "Setup"-"OCP". Added "buzzer volume" in

"Setup"-"OCP". Added "Auto Backup Time", "Out-

put Cascade" in "Setup"-"System"-"Input Pass-

word".). Changed the explanation of "Note 5".

Added "Note 6".

2-22(02): Changed the explanation of "Reports

Menu". Changed the Table ( Deleted "(See Note)".

Deleted the explanation of "Note".

Deleted the contents of "Finisher Menu for the

Booklet Finisher".

2-23(02): Change the Title of section (Finisher

Menu for the conatainer Stacker -> Finisher

Menu). Changed the figures. Changed Tables.

(Added Level 4.)

2-24(01): Added the contents of "Jobs" menu.

3-1(01): Add "Paper".

3-2(01): Deleted "Bond Paper:••••• Inserter" in

"Paper Weights".

3-5(01): Deleted the row of "Inserter" in the Table.

3-7(01):Changed reference pages in "Loading

Paper".

3-9(01):Changed the selections from OCP in 8, 9.

3-14(01):Changed the reference page of "Note" in

4. Changed the reference page in 6.

Deleted the contents of "Loading Paper into the

Inserter".

Manual Rev. Machine Rev. Page No. Date

(03) -

Deleted "Table 3-3. Inserter".

(Apr.2006)

3-18(01):*Deleted the row of "Inserter" in the

Table.

3-19(01):Changed the reference page of "Note"

in 1. Changed the reference page in 3.

3-21(01):Add "Note".

3-22(01): Add "CAUSION".

3-23(01), 3-24(01): Changed the Table.

3-25(01): Changed the explanation of "Paper Size

and Weight Limits". Delete the rows of "Booklet",

"Center Folding" in the Table.

3-26(01):Deleted the contents of "Finisher Adjust-

ment".

3-29(01): Changed the explanation of "Paper Pat-

tern". Changed the reference page in "Paper Pat-

tern". Deleted "Paper Pattern (with Detach

Voltage Support)".

3-30(01):Changed the reference pages in "Note"

in 4.

3-31(01): Changed the explanation and figures of

"Clearing Preset Values".

4-5(02): Changed the explanation of "Consum-

ables" “Reports” in the table.

4-8(01): Changed the figure.

4-10(01): Changed the explanation of "Status-

Consumables". Changed the figures. Changed

the Table (Deleted the column of "Fuser Unit".

Added the column of "Charger", "Corotron".

Added "***" and the explanation.)

4-12(01): Changed the explanation in "*1", "*2".

4-14(01): Changed the figure.

4-16(02): Changed the table.

4-18(01): Changed the reference pages in "Paper

Source". Delete "Note".

4-20(01): Changed the figure of "Options".

4-21(01): Changed the figure of "Stapler".

Deleted the contents of "Inserter", "Stapler",

"Folder".

4-22(01): Added the contents of "Short Stacking".

4-25(02): Changed the explanation of "Misc".

*Changed the figure of "Misc".

4-27(02): Changed the figure of "TCP/IP".

4-30(01): Changed the figure of "Jobs".

Manual Rev. Machine Rev. Page No. Date

(03) -

4-35(01): Deleted "Network I/F" in "Channel

Source" in the Table. Changed the descriptions of

"VPT", "PDL Source".

(Apr.2006)

5-3(01): Changed "Basic Troubleshooting Tips".

(Deleted information of MicroPress.)

5-4(01):Changed the reference pages.

5-5(01):Changed the reference pages.

5-6(01): Changed the reference pages.

5-8(01): Delete the contents of "Booklet Finisher

Error Codes (Option)".

5-10(0): Delete Booklet Finisher Error Codes

(Option)““.

5-11(01) - 5-13(01), 5-14(02), 5-20(01):

Deleted "Booklet Stacker "Booklet Stacker Full

Remove Booklets", "Booklet Stacker Full Remove

Paper", "Inserter Load xxx", "Invalid Combination

#1 Cancel Job", "Invalid Combination #2 Cancel

Job", "Invalid Folder #xx Clear Paper Path",

"Invalid Folder #xx Cancel Job", "Paper in Fin

Holding Path Remove Paper", "Paper in Fin

Sheet Path Remove Paper", "Paper in Sheet

Inserter 1 Remove Paper", "Paper in Sheet

Inserter 2 Remove Paper", "Paper Jam Connect-

ing Unit Remove Paper", "Paper Jam Connecting

Unit Remove Paper", "Paper Jam Fin Bypass

Remove Paper", "Paper Jam Fin Exit Remove

Paper", "Paper Jam Fin Folder Remove Paper",

"Paper Jam Fin Sheet Path Remove Paper",

"Paper Jam Sheet Inserter 1 Remove Paper",

"Paper Jam Sheet Inserter 2 Remove Paper",

"Paper Out Sheet Inserter 1 Load xxx", "Paper

Out Sheet Inserter 1 Load xxx", "Paper Out Sheet

Inserter 2 Load xxx", "Sheet Inserter 1 Open

Close Tray", "Sheet Inserter 2 Open Close Tray",

"Trimming Trash Box Full Empty Box",

"Trimming Trash Box Not Set Check Box",

"Trimming Unit Not Set Check Unit".

Added "IM#XX" into "Call for Service Exxx or

other text", (Note x) into "Paper Unmatch Check

Paper Information", "PM Counter Exceeded",

"Note 1" - "Note2". (PM Exceeded -> Note 2 PM

Counter Exceeded.)

6-2(01) - 6-3(01) :

*Delete the column of "Fuser" in Table.

6-4(01) - 6-5(01): Added the explanation of 2.

Manual Rev. Machine Rev. Page No. Date

(03) -

6-9(01) - 6-11(01): Changed the explanation for

"Replacing the Developer Mix". Added the figures

of OCP. Changed the selections from OCP in 5.

(Apr.2006)

6-13(01): Revised the selections from OCP.

6-12(01) - 6-14(01):Added the explanationand fig-

ure of 1. Changed the selections from OCP in 6.

6-17(01) - 6-18(01): Changed the selections from

OCP in 5. *Added the figures of OCP.

6-21(01): Changed the selections from OCP in 4.

Add the figures of OCP.

6-22(01):Changed the Title (Deleted Standard or

Booklet Maker Finisher). Changed the explanation

for "Replacing Staples"

6-26(01): Deleted "E069", "E06A", "E06B",

"E06C" in the upper figure. Changed the lower fig-

ure.

6-27(01): Changed the figure of "Finisher Jam".

*Deleted "E1C9", "E1C7", "Booklet Jam" in "Fin-

isher Jam".

6-29(01): Changed the right figure in 2.

6-31(01): Changed the figures in 8, 10.

6-32(01): Changed the figure in 12.

6-38(01): Changed the Title ("Multi-bypass Tray" -

> "MBT (Multi-bypass Tray)", "High Capacity

Feeder" -> "HCF (High Capacity Feeder)")

6-40(01):Changed the Title. (Deleted Standard or

Booklet Maker Finisher)

6-44(01) - 6-45(01): Add the figures in 7,8.

6-51(01): Added the contents of "Cleaning the the

Trays and Finsher Area".

6-57(01): Changed the figure in 10.

6-59(01): Changed the figure in 1.

6-61(01): Changed the figures of OCP.

6-64(01): Changed the figures of OCP.

6-66(01) - 6-67(01): Changed the "Detach Voltage

Adjustment". (Delete tha case of "Individual Tray

Adjust Not Supported".)

A-2(01): Changed the upper figure.

A-4(01): Changed the Declaration and the Table.

Manual Rev. Machine Rev. Page No. Date

(03) -

B-2(01): Changed the Table of "Base Printer" (

Deleted first "Controller". Changed second "Con-

troller".). *Deleted the row of "Booklet Finisher" in

the Table of "Finisher".

(Apr.2006)

B-5(01):Deleted the row of "Fuser Unit" in the

Table.

Delete the section of "Appendix D Finisher Adjust-

ment".

Made change of all page number due to above

changes.

04 -

TRADEMARK, NOTICE TO USER

Dec..2006

1-13(02):Added the Note.

2-14(01):Fixed the spelling (behavior).

2-18(03):Changed the explanation for "OCP"

2-24(03):Changed the value for buzzer volume

5-21(00)-5-22(00): Added the Note3 on the figure.

6-25(01):Added the Note 2.

Manual Rev. Machine Rev. Page No. Date

Table of Contents i

OG L 0 0

Table of Contents

Introduction

About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i-ix

Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i-ix

Manual Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i-x

For More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i-x

Chapter 1. Printer Overview

What This Chapter Provides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Printer Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Operator Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

External View of the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Internal View of the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Internal View of the Finisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Space Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Powering On the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Powering Off the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

Canceling a Print Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11

Clearing Other Error Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

Chapter 2. Operator Control Panel

What This Chapter Provides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

OCP Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

OCP Menu Icons and Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Using the OCP Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Using the Option Button Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Using the Ten Key Pad Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Using the + / - Change Button Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Using the Enable/Disable Change Button Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Printer Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Reports Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Jobs Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Finisher Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Information Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Finisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

OG L0 1

Andere Handbücher für DDP 184

Inhaltsverzeichnis

Andere Ricoh Drucker Handbücher

Ricoh

Ricoh SP 210 Bedienungsanleitung

Ricoh

Ricoh C7528 Betriebsanleitung

Ricoh

Ricoh Aficio SP 1200SF Bedienungsanleitung

Ricoh

Ricoh IM 7000 Bedienungsanleitung

Ricoh

Ricoh Pro L5130 Bedienungsanleitung

Ricoh

Ricoh C2408 Bedienungsanleitung

Ricoh

Ricoh SP 200 Bedienungsanleitung

Ricoh

Ricoh SP 6430DN Bedienungsanleitung

Ricoh

Ricoh J012 Bedienungsanleitung

Ricoh

Ricoh Aficio SP C730DN Bedienungsanleitung

Ricoh

Ricoh SP C250DN Bedienungsanleitung

Ricoh

Ricoh BookletMaker SR85 Bedienungsanleitung

Ricoh

Ricoh Pro 8100S Bedienungsanleitung

Ricoh

Ricoh D074 Series Installationsanleitung

Ricoh

Ricoh Aficio MP W3600 Bedienungsanleitung

Ricoh

Ricoh SP 210 Bedienungsanleitung

Ricoh

Ricoh FT5535 Bedienungsanleitung

Ricoh

Ricoh Pro C5200s Betriebsanleitung

Ricoh

Ricoh AficioSP C410DN Bedienungsanleitung

Ricoh

Ricoh D009 Bedienungsanleitung

Ricoh

Ricoh CL7000 - Aficio D Color Laser Printer Bedienungsanleitung

Ricoh

Ricoh OP-P1 Handbuch

Ricoh

Ricoh PRO C7200S Betriebsanleitung

Ricoh

Ricoh IJM C180F Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung