Ricoh MP C6502SP Kurzanleitung

Model CH-C1

Machine Code:

D135/D136/D137/D138

Field Service Manual

23 May, 2014

Revision History

Version Revision Date Revision History

V1.00 2013.05.13 -

V2.00 2014.03.20 See page 1 "Revision History (V2.00)" .

V3.00 2014.05.23 See page 4 "Revision History (V3.00)" .

Revision History (V2.00)

Chapter Items

2. Installation Main machine (Pro)

Main machine (Office)

Finisher SR4090 (D703) /Booklet Finisher SR4100 (D704)

Finisher SR4110 (D707)

Punch Unit PU5000 (B831)

Copy Tray Type M2 (D744)

Decurl Unit DU5020 (D727)

Buffer Pass Unit Type 5020 (D751)

Multi-Folding Unit FD4000 (D615)

Cover Interposer Tray CI4010 (D711)

LCIT RT4030 (D710)

A3/11"x17" Tray Unit Type M2 (D749)

3. Preventive Maintenance PM Parts Settings

Toner Shield Glass Cleaning

4. Replacement and adjustment PCDU

BCU replacement procedure

NVRAM Replacement Procedure

Chapter Items

5. Troubleshooting Adjustments Required for Improved Glossiness (Pro C5110S/

C5100S Only)

Adjustments Required for Improved Glossiness (MP C8002SP/MP

C6502SP)

Margin adjustment

Image Quality_Definitions of abnormal images

Color spots (189mm/40mm pitch)

White spots

White spots with toner cores

White, fish-shape stains

Vertical streaks caused by contact with the toner adhering to the

guide plate

Roller marks

Banding Caused by the PCDU (Pro C5110S/Pro C5100S)

Vertical band of halftone images

Uneven density in the area 85mm from the trailing edge

Density unevenness and dust when using AC transfer (Pro

C5110S/C5100S Only)

Uneven glossiness when feeding large size paper after small size

paper

Unevenness in indefinite shape on sides of paper

Random Pitch Banding Caused by Lubricant Falling from the Drum

Cleaning Unit

3mm-Pitch Banding on Paper with Paper Thickness 6 (Pro

C5110S/C5100S Only)

Chapter Items

5. Troubleshooting Stains in the area 76mm from the trailing edge

Stains on the side edges of paper

Blocking on the Paper Output Tray

Streaks made by Paper Edges

Grainy image

Uneven image density on textured paper(Pro C5110S/C5100S

Only)

Small granular toner fixation (Pro C5110S/C5100S Only)

Too Much Weight/Abnormal Noise on Pulling Out/Pushing In the

Drawer Unit

Correspondence Table for Adjustment Settings for Operators and

SP Mode (Pro C5110S/C5100S Only)

SC516 after repeated J097

SC570-00 (Pro C5110S/C5100S Only)

SC515-01

SC515-02

Curls

Envelopes Are Wrinkled

Feed Direction Limitations Applied on Certain Types of Envelopes

Twining Jams in the Lower Part of the Fusing Unit Caused by

Insufficient Margins

Fan Noise is Large

Chapter Items

5. Troubleshooting Proof tray detected to be full too soon

Envelopes are not fed

Toner rubbing off along the fold line

SR4090/SR4100: Corner stapling: stapling failure/stack failure/

large misalignment

SR4090/SR4100: 1st sheet of stapled stack misaligned

SR4090/SR4100: Paper jam caused by the shift tray

unexpectedly staying up or down

SR4090/SR4100: Problem with paper stacked on the shift tray

SR4100: How to improve center-folding accuracy

SR4090/SR4100: SP Settings list for adjusting Shift Tray Jogger

How to improve center-folding accuracy

Corner stapling: stapling failure/stack failure/large misalignment

SR4090/SR4100: 1st sheet of stapled stack misaligned

SP Settings for adjusting Shift Tray Jogger/Corner Stapling/

Booklet Stapling for SR4090/SR4100

Problem with paper stacked on the shift tray

Paper jam caused by the shift tray unexpectedly staying up or

down

Creases and Jam in stapler unit

Appendices Preventive Maintenance Tables

Revision History (V3.00)

Chapter Items

2. Installation Main Machine Installation

Cooling Fan Unit Type M2 (D770)

Chapter Items

3. Preventive Maintenance PM Parts Settings

PM Counter Display: All PM Parts list: Main Menu

4. Replacement and adjustment Toner Supply Unit: Sub Hopper Unit replacement / adjustment

procedure

Scanner Unit: Important Notice for Scanner Heater Installation

PCDU: Important notice of the newly replaced drum

Image Transfer Belt Unit: Lubrication after replacement

ITB Cleaning Unit: Brush when applying the lubricant powder or

yellow toner

PCDU: Brush when applying the lubricant powder or yellow toner

Fusing Unit: Paper feed sensor

Tandem Tray: Left tandem tray / Right tandem tray

Paper feed unit for tray1

Duplex Unit: Roller HP sensor 2 / Sensor shift HP switch

Motors and Sensors: Drum motor (KCMY) / Drum encoder sensor

(KCMY)

Chapter Items

5. Troubleshooting Self-Diagnostic Mode

Service Call 101-195: SC187 table

Jam Detection (Sensor locations)

Troubleshooting for 2~3mm pitch banding

Troubleshooting for White spots appear in Winter environment

Troubleshooting for scratch mark

Troubleshooting streaks caused by damaged fusing belt

Troubleshooting fuzzy line in originating in cyan drum

Troubleshooting “Shock-jitter” in B/W mode

Original size misdetection

Improper message when set the tandem tray

Skew in sub-scan direction

Service Call 202-286: SC202-286 tables

Service Call 300-398: SC381,382 tables

Service Call 400-498: SC460 table

Service Call 400-498: SC401 table

Service Call 501-595: SC540 table

Service Call 816-899: SC819 table

SR4090/SR4100: Staple misalignment troubleshooting

Important Safety Notices

Prevention of Physical Injury

1. Before disassembling or assembling parts of the copier and peripherals, make sure that the copier

power cord is unplugged.

2. The wall outlet should be near the copier and easily accessible.

3. If any adjustment or operation check has to be made with exterior covers off or open while the

main switch is turned on, keep hands away from electrified or mechanically driven components.

4. The copier drives some of its components when it completes the warm-up period. Be careful to

keep hands away from the mechanical and electrical components as the copier starts operation.

5. The inside and the metal parts of the fusing unit become extremely hot while the copier is operating.

Be careful to avoid touching those components with your bare hands.

Health Safety Conditions

1. Toner and developer are non-toxic, but if you get either of them in your eyes by accident, it may

cause temporary eye discomfort. Immediately wash eyes with plenty of water. If unsuccessful, get

medical attention.

2. The copier, which use high voltage power source, can generate ozone gas. High ozone density is

harmful to human health. Therefore, the machine must be installed in a well-ventilated room.

Observance of Electrical Safety Standards

The copier and its peripherals must be serviced by a customer service representative who has completed

the training course on those models.

• Keep the machine away from flammable liquids, gases, and aerosols. A fire or an explosion might

occur.

• The Controller board on this machine contains a lithium battery. The danger of explosion exists if a

battery of this type is incorrectly replaced. Replace only with the same or an equivalent type

recommended by the manufacturer. Discard batteries in accordance with the manufacturer's

instructions and local regulations.

• The optional fax and memory expansion units contain lithium batteries, which can explode if

replaced incorrectly. Replace only with the same or an equivalent type recommended by the

manufacturer. Do not recharge or burn the batteries. Used batteries must be handled in

accordance with local regulations.

Safety and Ecological Notes for Disposal

1. Do not incinerate toner bottles or used toner. Toner dust may ignite suddenly when exposed to an

open flame.

2. Dispose of used toner, the maintenance unit which includes developer or the organic

photoconductor in accordance with local regulations. (These are non-toxic supplies.)

3. Dispose of replaced parts in accordance with local regulations.

4. When keeping used lithium batteries in order to dispose of them later, do not put more than 100

batteries per sealed box. Storing larger numbers or not sealing them apart may lead to chemical

reactions and heat build-up.

Laser Safety

The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical units

in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite

equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser

chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis and

laser subsystems to the factory or service depot when replacement of the optical subsystem is required.

•Use of controls, or adjustment, or performance of procedures other than those specified in this

manual may result in hazardous radiation exposure.

• Turn off the main switch before attempting any of the procedures in the Laser Optics Housing Unit

section. Laser beams can seriously damage your eyes.

CAUTION MARKING:

Andere Handbücher für MP C6502SP

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ricoh Drucker Handbücher

Ricoh

Ricoh Aficio SP C430DN Handbuch

Ricoh

Ricoh C811DN - Aficio SP Color Laser Printer Bedienungsanleitung

Ricoh

Ricoh P 501 Bedienungsanleitung

Ricoh

Ricoh Aficio CL4000DN Bedienungsanleitung

Ricoh

Ricoh Neptune-P1 Bedienungsanleitung

Ricoh

Ricoh Aficio AP610 Betriebsanleitung

Ricoh

Ricoh Priport JP5500 Bedienungsanleitung

Ricoh

Ricoh P 310 Bedienungsanleitung

Ricoh

Ricoh Taurus-C1a Series Service-Handbuch

Ricoh

Ricoh AP410 Bedienungsanleitung

Ricoh

Ricoh Pro 1106EX Bedienungsanleitung

Ricoh

Ricoh Aficio MP 1600 Betriebsanleitung

Ricoh

Ricoh G112 Bedienungsanleitung

Ricoh

Ricoh SP C250DN Bedienungsanleitung

Ricoh

Ricoh TH-C1 Service-Handbuch

Ricoh

Ricoh AP600N Bedienungsanleitung

Ricoh

Ricoh AP2610 - Aficio B/W Laser Printer Bedienungsanleitung

Ricoh

Ricoh A850 Bedienungsanleitung

Ricoh

Ricoh Z-P2 Kurzanleitung

Ricoh

Ricoh Aficio SP 3410DN Bedienungsanleitung

Ricoh

Ricoh 9100DN - Aficio SP B/W Laser Printer Bedienungsanleitung

Ricoh

Ricoh SP204SF Bedienungsanleitung

Ricoh

Ricoh SP4100N - Aficio SP B/W Laser Printer Bedienungsanleitung

Ricoh

Ricoh Lef-C1 Installationsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung