Ricoh PJ WX3131 Bedienungsanleitung

PreparationsOperationsMaintenanceOthers Before Using

PJ X3131

PJ WX3131

PJ X3241

DATA PROJECTOR

OWNER’S MANUAL

For safe and correct use, be sure to read “Before Using” before using the machine.

In the spaces provided below, record the Model and Serial No. located at the bottom of

your projector.

Model No. Serial No.

Retain this information for future reference.

SAFETY PRECAUTIONS

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of sufﬁcient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES

ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.

REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

USA only

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST

BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE

OR FEDERAL LAWS.

MODEL NAME: PJ X3131 / PJ WX3131 / PJ X3241 USA only

TRADE NAME: DATA PROJECTOR

MODEL NAME: PJ X3131 / PJ WX3131 / PJ X3241

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

Before Using

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the sales representative or an experienced radio/TV technician for help.

RESPONSIBLE PARTY: Ricoh Americas Corporation

5 Dedrick Place, West Caldwell, NJ 07006

Phone: 973-882-2000

CAUTION:

USA only

Changes or modiﬁcations made to this equipment, not expressly approved by

Ricoh, or parties authorized by Ricoh, could void the user’s authority to operate

the equipment.

Notice:

CANADA only

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe B est conforme à la norme NMB-003 du Canada.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND

INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE

MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE

REFERENCE.

This unit is fully transistorized and does not contain any parts that can be repaired by the

user.

WARNING: DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE

EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL ONLY.

1. Read Owner’s Manual

After unpacking this product, read

the owner’s manual carefully, and

follow all the operating and other

instructions.

2. Power Sources

This product should be operated

only from the type of power source

which does not exceed the voltage

range speciﬁed on the rating label

and the power cord.

If you are not sure of the type

of power supply to your home,

consult your sales representative

or local power company.

3. Source of Light

Do not look into the lens while the

lamp is on. The strong light from

the lamp may cause damage to

your eyesight.

4. Ventilation

Openings in the cabinet are

provided for ventilation and to

ensure reliable operation of the

product and to protect it from

overheating. These openings must

not be blocked or covered. Never

block an opening by placing the

product on a bed, sofa, rug or

other similar surface. Do not place

it in a built-in installation such as

a bookcase or rack, unless proper

ventilation is provided.

Before Using

5. Heat

The product should be situated

away from heat sources such as

radiators, heat registers, stoves,

or other products (including

ampliﬁers) that produce heat.

6. Water and Moisture

Do not use this product near water.

- for example, near a bath tub,

wash bowl, kitchen sink, or laundry

tub; in a wet basement; or near a

swimming pool and the like.

7. Cleaning

Unplug this product from the wall

outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners.

Always use a soft cloth for

cleaning.

8. Be sure that you ﬁrmly

insert the plug into the wall

outlet.

Incorrect or faulty connections

may result in ﬁre or electric shock.

Avoid using an unsound or loose

outlet.

9. Power Cord Protection

Power cords should be routed

so that they are not likely to be

walked on or pinched by items

placed upon or against them,

paying particular attention to cords

at plugs, convenience receptacles,

and the point where they exit from

the product.

10. Overloading

Do not overload wall outlets. To

reduce the risk of electric shock,

do not use the polarized plug with

an extension cord , receptacle, or

other outlet unless the blades can

be inserted completely with three-

wire grounding type to prevent

blade exposure. Failure to follow

these instructions may result in ﬁre

or electric shock.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

11. Lightning storms

For added protection for this

product during a storm, or when it

is left unattended and unused for

long periods of time, unplug it from

the wall outlet. This will prevent

damage to the product due to

lightning and power-line surges.

Never operate this unit on AC

power during a thunderstorm. If

you see lightning or hear thunder,

never touch the unit, cables and/or

peripherals. An electric surge

caused by the storm, may result in

an electrical shock or damage to

the unit.

12. Object and Liquid Entry

Never push objects of any kind into

this product through openings as

they may touch dangerous voltage

points or short-out parts that could

result in a ﬁre or electric shock.

Never spill liquid of any kind on the

product.

13. Do not place or keep the

projector within the reach

of the children.

It may fall or tip over, possibly

causing serious injury.

14. Do not place the product

vertically

Do not use the product in the

upright position or any other

vertical positions to project the

pictures. It may fall which could

result in serious injury and/or

damage to the product.

15. Stack Inhibited

Do not stack other equipment on

this product and do not place this

product on other equipment. The

top and bottom surface of this

product increase in temperature

during normal use and may

damage the other unit.

Before Using

16. Attachments

Do not use attachments not

recommended by the product

manufacturer.

Use of an incompatible

attachments could cause hazards

or damage to the product.

17. Accessories

Do not place this product on

an unstable cart, stand, tripod,

bracket, or table. The product may

fall, causing serious injury to a

child or adult, and serious damage

to the product. A product and cart

combination should be moved with

care. Quick stops, excessive force,

and uneven surfaces may cause

the product and cart combination

to overturn.

S3125A

18. Damage Requiring Service

Unplug this product from the wall

outlet and take the product to

qualiﬁed service personnel if you

encounter any of the following

conditions:

a) The power supply cord or plug is

damaged.

b) Liquid has been spilled, or objects

have fallen into the product.

c) The product has been exposed to

rain or water.

d) The product does not operate

normally when following the

operating instructions. Adjust only

those controls that are covered by

the operating instructions since

an improper adjustment of other

controls may result in damage and

will often require extensive work by

a qualiﬁed technician to restore the

product to its normal operation.

e) The product has been dropped or

damaged in any way (If the cabinet

should break, please handle with

care to avoid injury) .

f) The product exhibits a distinct

change in performance, which

indicates a need for service.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

19. If glass components,

including lens and lamp,

should break, contact your

sales representative for

repair service.

This product incorporates glass

components, including a lens and

a lamp.

If these should break, please

handle with care to avoid injury and

contact your sales representative

for repair service. Avoid any broken

pieces of glass since they may

cause injury. In the unlikely event

that the lamp ruptures, thoroughly

clean the area around the projector

and discard any edible items

placed in that area since they may

be contaminated.

20. Servicing

Do not attempt to service this

product yourself as opening or

removing covers may expose you

to dangerous voltage or other

hazards. Refer all servicing to

qualiﬁed service personnel.

21. Do not place anything in

front of the lens while the

projector is operating

Things placed in front of the lens

may overheat and burn or start a

ﬁre.

If you want to temporarily stop the

projected image, use the mute on

the remote control.

22. Replacement Parts

When replacement parts are

required, be sure the service

technician has used replacement

parts speciﬁed by the manufacturer

or have the same characteristics

as the original part.

Unauthorized substitutions may

result in ﬁre, electric shock, or

other hazards.

(Only the replacement of the lamp

should be made by users.)

23. Safety Check

Upon completion of any service

or repairs to this product, ask the

service technician to perform safety

checks to verify that the product is

in proper operating condition.

24. Do not leave thermal-

paper documents or easily

deformed items on top

of the unit or near the air

exhaust for long periods of

time.

The heat from the unit could erase

the information on the thermal

paper, or cause deformation or

warping.

25. Do not use the product in a

closed installation location.

Do not place the product in a box

or in any other closed installation

location. Otherwise it may overheat,

which could result in a risk of ﬁre.

Before Using

POWER SUPPLY INFORMATION

If your line voltage is 220 to 240 V, use one of the following types of cable/plug.

Plug

configuration Plug type

Australian

240 V

10 A

North American

240 V

15 A

Switzerland

240 V

6 A

Line voltage

EURO

220 – 240 V

200 – 240 V

Plug

configuration Plug type Line voltage

Use a 5 A fuse which is approved by

ASTA or BSI to BSI362.

Always replace the fuse cover after

changing the fuse.

IMPORTANT PRECAUTIONS

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location.

When the unit is exposed to such a change in temperature, moisture may condense on the

lens and the crucial internal parts. Do not use the unit for at least 2 hours when there is an

extreme or sudden change in temperature to prevent the unit from possible damage.

Place and Manner of Installation

Do not place in hot locations, such as near heating equipment. Doing so could cause

malfunction, and shorten the life of the projector.

Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts, shortening

their lives, and darkening the screen.

Do not use this product in the upright position or tilt it up or down by more than 20° from

level. Doing so may cause a failure or shorten the life of the product.

Using this instrument near a TV or radio may cause interference to the images or audio

sound. If this happens, move it away from the TV or radio.

Moving the projector from a low-temperature room to a high-temperature room may cause

condensation on the lens or internal parts. If you continue to use it in that situation, it may

malfunction. Wait until the condensation naturally disappears.

In a high altitude location where air is thin, cooling efﬁciency is reduced so use the

projector with [Fan mode] set to [High].

p.41

Only plug the power cord into outlets rated for use with the power cord’s speciﬁed voltage range.

Do not overload extension cords or power strips as this can result in ﬁre or electric shock.

Route the power cable or the connecting cable away from where people could trip over it.

The projector may fall down, which could result in severe injury.

Be sure the power cord is easily reached for unplugging in case of emergency. Do not

place any obstacles near a wall outlet in which the cord is plugged.

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or

plastic products touching the unit for a long time as they will leave marks on the ﬁnish.

Do not use a chemically saturated cloth.

•

IMPORTANT PRECAUTIONS (Continued)

LCD Panel

If the air ﬁlter is stained and is clogged up, the main unit inner temperature rises. As a

result, the life of the LCD is shortened and a malfunction may also occur.

Clean the air ﬁlter from time to time and replace it regularly. It is recommended that this

replacement be done at the time of replacing a lamp. (Ask your sales representative

where the unit was purchased or your nearby service station about an air ﬁlter for

replacement.)

EXEMPTION CLAUSES

Ricoh Corporation bears no responsibility in the case of damages arising from natural

disaster such as earthquakes, lightning, etc., ﬁre not liable to Ricoh Corporation, acts by

third parties, other accidents, or use under abnormal conditions including erroneous or

improper operation and other problems.

Ricoh Corporation bears no responsibility for incidental damages (lost proﬁt, work

interruption, corruption or loss of the memory contents, etc.) arising from the use of or the

inability to use this unit.

Ricoh Corporation accepts no liability whatsoever for any damages arising from not

having followed the descriptions in this Owner’s Manual.

Ricoh Corporation accepts no liability whatsoever for any damages arising from

malfunctions arising from combination with equipment or software that is not related to

Ricoh Corporation.

OTHER INFORMATION

Copyrights

Showing or transmitting commercial imaging software or broadcast or cable-broad casting

programs with the purpose of other than the personal and private viewing, including

modifying images using the freeze or resize functions, or displaying with the varying

aspect ratio of the images, could violate the direct or indirect copyrights of the imaging

software or broadcast program, etc., if done without ﬁrst consulting with the copyright

holder. For this reason, please take appropriate measures before performing one of the

actions listed above, including obtaining a license from the copyright holder.

Disposal

This product contains substances which are harmful to humans and the environment.

The lamp contains mercury.

Please dispose of this product or used lamps in accordance with local regulations.

Following information is only for EU-member states:

The use of the symbol indicates that this product may not be treated as

household waste. By ensuring this product is disposed of correctly, you will

help prevent potential negative consequences for the environment and human

health, which could otherwise be caused by inappropriate waste handling of

this product. For more detailed information about recycling of this product,

please contact your local city ofﬁce, your household waste disposal service or

the shop where you purchased the product.

•

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ricoh Projektor Handbücher

Ricoh

Ricoh Soleil-PJ2.5 Series Installationsanleitung

Ricoh

Ricoh PJ WX4152NI Bedienungsanleitung

Ricoh

Ricoh PJ WX3340 Bedienungsanleitung

Ricoh

Ricoh PJ HDC5420 Bedienungsanleitung

Ricoh

Ricoh Mizar-PJ2 cw Series Handbuch

Ricoh

Ricoh PJ WX4130 Bedienungsanleitung

Ricoh

Ricoh PJ X6180N Bedienungsanleitung

Ricoh

Ricoh PJ WXL5860 Bedienungsanleitung

Ricoh

Ricoh Y017 Handbuch

Ricoh

Ricoh Sirius-PJ1 Kurzanleitung

Ricoh

Ricoh PJ RU7700L Series Bedienungsanleitung

Ricoh

Ricoh Leo-C2/P2 Service-Handbuch

Ricoh

Ricoh Image Pointer GP01 Bedienungsanleitung

Ricoh

Ricoh PJ WX5140 Bedienungsanleitung

Ricoh

Ricoh IPSiO PJ X3130 Bedienungsanleitung

Ricoh

Ricoh PJ WXL5670 Bedienungsanleitung

Ricoh

Ricoh Antares-PJ1 Series Kurzanleitung

Ricoh

Ricoh Y024 Handbuch

Ricoh

Ricoh PJ WUL6281 Bedienungsanleitung

Ricoh

Ricoh PJ X5360N Kurzanleitung

Ricoh

Ricoh PJ WUL6670 Bedienungsanleitung

Ricoh

Ricoh WXC1110 Y0AB Kurzanleitung

Ricoh

Ricoh IPSiO PJ X3240N Bedienungsanleitung

Ricoh

Ricoh PJ X5360N Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung