Rigol DS1204B Betriebsanleitung

RIGOL

Programming Guide

DS1000B Series Digital Oscilloscope

DS1204B/DS1104B/DS1074B

Feb. 2014

RIGOL Technologies, Inc.

RIGOL

Programming Guide for DS1000B Series

Guaranty and Declaration

Trademark Information

RIGOL is registered trademark of RIGOL Technologies, Inc.

Publication Number

PGA04109-1110

Notices

RIGOL products are protected by patent law in and outside of P.R.C..

RIGOL Technologies, Inc. reserves the right to modify or change parts of or all

the specifications and pricing policies at company’s sole decision.

Information in this publication replaces all previously corresponding material.

RIGOL shall not be liable for losses caused by either incidental or consequential

in connection with the furnishing, use or performance of this manual as well as

any information contained. Any part of this document is forbidden to copy or

photocopy or rearrange without prior written approval of RIGOL.

Product Certification

RIGOL guarantees this product conforms to the national and industrial standards in

China as well as the ISO9001:2008 standard and the ISO14001:2004 standard.

Other international standard conformance certification is in progress.

If you have any problem or requirement when using our products or this manual,

please contact RIGOL.

E-mail: service@rigol.com

Website: www.rigol.com

RIGOL

Programming Guide for DS1000B Series

Content

Chapter 1 Programming Introduction..................................................1-1

Communication Interface......................................................................... 1-2

Command Introduction............................................................................ 1-3

Command Syntax ............................................................................. 1-3

Symbol Description........................................................................... 1-4

Command Input ............................................................................... 1-5

Parameter Type................................................................................ 1-6

Chapter 2 Command Systems ..............................................................2-1

General Commands................................................................................. 2-2

SYSTem Commands................................................................................. 2-5

ACQuire Commands ...............................................................................2-12

DISPlay Commands................................................................................2-15

TIMebase Commands.............................................................................2-21

TRIGger Commands...............................................................................2-26

Trigger Control................................................................................2-28

EDGE Trigger ..................................................................................2-34

PULSe Trigger .................................................................................2-35

VIDEO Trigger.................................................................................2-36

PATTern Trigger ...............................................................................2-38

ALTernation Trigger..........................................................................2-39

MATH Commands...................................................................................2-48

CHANnel Commands ..............................................................................2-50

MEASure Commands ..............................................................................2-57

WAVeform Commands............................................................................2-69

KEY Commands .....................................................................................2-79

SAVe/RECall Commands..........................................................................2-97

MASK Commands.................................................................................2-103

CURSor Commands..............................................................................2-109

Other Commands.................................................................................2-116

Chapter 3 Programming Examples.......................................................3-1

Prepare for Programming......................................................................... 3-2

Program in Visual C++ 6.0....................................................................... 3-3

RIGOL

Programming Guide for DS1000B Series

III

Program in Visual Basic 6.0 ......................................................................3-8

Program in LabVIEW 8.6........................................................................ 3-10

Appendix: Command Quick Reference A-Z.................................................1

Programming Introduction RIGOL

Programming Guide for DS1000B Series

1-1

Chapter 1 Programming Introduction

This chapter provides guidance to the remote control programming of the DS1000B

series digital oscilloscopes and introduction of the commands.

This chapter includes:

Communication Interface

Command Introduction

Command Syntax

Symbol Description

Command Input

Parameter Type

RIGOL Programming Introduction

Programming Guide for DS1000B Series

1-2

Communication Interface

Computers can communicate with the oscilloscope by sending and receiving

messages over USB or LAN interface. Commands in the form of ASCII character

strings are embedded in your computer to make control easier.

Operations that you can do with a computer and the oscilloscope include:

Set up the oscilloscope;

Relational measurements;

Acquire data (waveforms or measurement data) from the oscilloscope.

Equipment Connection:

USB: Use an USB data cable and connect the USB Device port on the rear panel

of the oscilloscope to PC.

LAN: Use a network cable and connet the oscilloscope to LAN.

Programming Introduction RIGOL

Programming Guide for DS1000B Series

1-3

Command Introduction

Command Syntax

The commands system of DS1000B series oscilloscope is a multistage tree structure,

and each of sub-system is consists of a “Root” keyword and multilayered keywords.

The commands are always begin with a “:”(except for IEEE commands) and the

keywords are also separated by “:”; optional parameters are permitted to follow the

keywords; “?” appeared following a command line denotes to query this function;

besides, “space” is used to divide command and parameter.

For example:

:TRIGger:EDGE:SLOPe {POSitive|NEGative|ALTernation}

:TRIGger:EDGE:SLOPe?

TRIGger is the root keyword of the command, EDGE and SLOPe is separately its

second and third keyword, all of them are separated by “:”. Connects enclosed in the

“{}” denote the parameters permitted to be set by user; “?” denotes to query; the

command :TRIGger:EDGE:SLOPe is set apart from parameter using “space”. “,” is

used to compart the parameters existed in some commands, for example:

:TRIGger:PATTern:PATTern <value>,<mask>,<ext source>[,<edge

source>,<edge>]

RIGOL Programming Introduction

Programming Guide for DS1000B Series

1-4

Symbol Description

The following symbols are not “real” parts of the commands, but they are usually used

to assist to explain the parameters containd in a command line.

1. Braces { }

The parameters or contents enclosed in “{}” must be selected, and only one

parameter or content could be selected once. All the options are separated by

“|”.

For example:

{{1|ON}|{0|OFF}} indicateds that 1, ON, 0 or OFF can be selected at a time.

2. Square brackets [ ]

Some keywords or contents are enclosed by square bracket “[ ]”, which

indicates that those parameters are optional and will be execute no matter

whether been omitted or not.

For example:

:TIMebase[:MAIN]:OFFSet <offset>

[:MAIN] can be omitted.

3. Triangle Brackets < >

Parameter enclosed in “< >” should be replaced by a effective value.

For example:

:DISPlay:BRIGhtness <ncount>

replaced by an effective value:

:DISPlay:BRIGhtness 80

Andere Handbücher für DS1204B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rigol Prüfgeräte Handbücher

Rigol

Rigol DS1104Z-S Plus Bedienungsanleitung

Rigol

Rigol DHO900 Bedienungsanleitung

Rigol

Rigol DS4024E Bedienungsanleitung

Rigol

Rigol DS2000E Series Bedienungsanleitung

Rigol

Rigol DL3000 Series Bedienungsanleitung

Rigol

Rigol RP7000 Series Bedienungsanleitung

Rigol

Rigol DG900 Pro Series Bedienungsanleitung

Rigol

Rigol DS4000E Series Betriebsanleitung

Rigol

Rigol DS1102/4B Bedienungsanleitung

Rigol

Rigol RP7080S Bedienungsanleitung

Rigol

Rigol RPL2316 Bedienungsanleitung

Rigol

Rigol DS8000-R Series Bedienungsanleitung

Rigol

Rigol DS1000Z Series Bedienungsanleitung

Rigol

Rigol MSO7000 Series Bedienungsanleitung

Rigol

Rigol MSO1000Z series Bedienungsanleitung

Rigol

Rigol HDO4000 Series Bedienungsanleitung

Rigol

Rigol MSO8000A Series Bedienungsanleitung

Rigol

Rigol DG2000 Series Installations- und Betriebshandbuch

Rigol

Rigol DS1102E Bedienungsanleitung

Rigol

Rigol DHO4000 Series Installations- und Betriebshandbuch

Rigol

Rigol DS1000Z Series Bedienungsanleitung

Rigol

Rigol MSO2000A Series Bedienungsanleitung

Rigol

Rigol MSO8000A Series Bedienungsanleitung

Rigol

Rigol MSO1000Z series Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung