Rimage Professional 5100N Bedienungsanleitung

1 2000447_E

Rimage Professional 5100N and 5300N

Maintain the Professional

Use the information in this section to keep your Professional in optimal operating

condition.

,Warning! Always power off the autoloader and unplug the power cord before

you access the embedded PC.

Overview

Regular preventative maintenance of your Professional can help to ensure

error-free recordings and clean printed labels. Maintenance involves cleaning the

system and aligning the Everest printer on top of the autoloader.

Note: The Everest printer has its own maintenance requirements. Refer to

your Rimage Everest User Guide for information.

Cautionary Information

nCaution: To avoid damaging the Professional during maintenance:

• Never use oils, silicone, or other lubricants on any part of the

Professional.

• Use only non-abrasive cleaners to wipe down the surfaces of your

Professional.

• Never use cleaners to clean the embedded PC.

• Avoid pouring cleaners directly onto the Professional. Instead, apply the

cleaner to the cloth rst.

• Observe precautions for electrostatic-sensitive devices whenever you

access the embedded PC.

English

2000447_E 2

Maintain the Professional

Preventative Maintenance Schedule

Use the following table as a guideline for how often to perform preventative

maintenance tasks.

Note: Your system may require more frequent maintenance if used in a

dusty area, such as a store or warehouse.

Before you begin:

1. Power off the Professional.

2. Disconnect the power cord.

-Important! Failure to follow the maintenance schedule outlined below may

void your warranty.

Tool Task Frequency

Lint-free cloth

Non-abrasive, all-

purpose cleaner

Wipe down all surfaces of the

autoloader, including:

• Sides and top

• Input bins

• Output trays

• Output bin

• Base (remove the input bin rst)

• Top surface on the lift arm

Weekly

Can of

compressed air

Remove dust and debris from the

fans at the back of the autoloader.

Monthly

Vacuum Remove dust and debris from

the openings at the back of the

autoloader.

Monthly

Can of

compressed air

Remove the side panels and remove

all dust from the embedded PC.

Monthly

Torx T25 driver Align the Everest printer. Refer to

the Align the Printer section in

the Rimage Professional User Guide.

On installation

and as needed

English

Andere Handbücher für Professional 5100N

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rimage Computerhardware Handbücher

Rimage

Rimage Producer III series Bedienungsanleitung

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 Bedienungsanleitung

Rimage

Rimage Producer III 6100N Bedienungsanleitung

Rimage

Rimage AutoPrinter Bedienungsanleitung

Rimage

Rimage Producer III 6100 Bedienungsanleitung

Rimage

Rimage Producer III Bedienungsanleitung

Rimage

Rimage CDPR3 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung