Ringdale Minit 5250E Bedienungsanleitung

Ringdale, Inc.

101 Halmar Cove

Georgetown, Texas 78628

Tel: 888-288-9080

www.nlynx.com

www.ringdale.com

Ethernet to the iSeries

400-3100-01

Rev 2.22

September 2006

MinIT 5250E

Users Guide

Technical Support

Technical SupportTechnical Support

Technical Support

Important Notes:

The Power Button on the top of the unit will be lit (white) when

there is power to the unit. The unit will not start until you press

the button. Then it will turn green and the unit will boot.

The correct way to power down the unit is from the Start button or the

MinIT Start Menu. Select Power Down from the menu. It will take a few

moments to shut itself down and the light will turn white again.

If you forget to power the unit down correctly, you may lose any macros that

you have recorded since the last proper shutdown.

There is extensive on-line help within the MinIT 5250E application.

If you are still in need of assistance, the following resources are available:

On the web: www.nlynx.com

Telephone Support USA: 888-288-9080 or 512-288-9080

TABLE OF

TABLE OFTABLE OF

TABLE OF

CONTENTS

CONTENTSCONTENTS

CONTENTS

Packing List 2

Connecting the Unit 3

Getting Around the Desktop 4

The MinIT Start Menu 6

Configuration 7

Unit Information 8

Network Settings 9

Keyboard 10

5250 Sessions 11

Display Sessions 11

Printer Sessions 12

Printer Settings 13

Operation 14

122-key Twinax Style

Keyboard 14

PC Style Keyboard 15

Macro Recording and

Playback 16

Text Terminal Mode 17

Technical Support 20

120

MinIT 5250E packing list

MinIT 5250E packing listMinIT 5250E packing list

MinIT 5250E packing list

Mouse

Power Pack

MinIT 5250E Unit

2 19

In the MinIT Administrator go to 5250 Sessions then go into

each display session and click the check box that sets the

session to Text mode.

2. Go into Unit Information and click the box for Boot into

Terminal mode only.

3. Click Done and reboot the MinIT.

At this point, the unit will boot straight into Session 1 in Text mode.

No Window Manger will be running and there will be no means for

the user to modify settings. The user can toggle between the (up to)

five Display Sessions by using Alt-F1 thru Alt-F5.

There are a few reasons, mostly to do with networking, which may

cause Session 1 to not start or fail to connect. After correcting the

problem, you do not have to reboot the MinIT. If you press Alt-F12

you will see a User Menu of options including 'r1' which restarts

Session 1. This can save you the time and trouble of a reboot.

More about this User Menu -- there are two 'secret' commands we

chose not to expose to users:

 'nr' restarts networking. This may be all that is required if

your Ethernet cable was loose.

 'sq' shows you the contents of the printer Spool Queues.

This menu also allows you to start a window manager session if you

wish to modify your settings. If you had earlier set an Administrative

Password, attempting to start the window manager would prompt you

for that password.

AND, this menu gives you a power down command. If you are

running the Minit 5250E in Text ONLY Mode, we recommend you

use this instead of the power button. This orderly shut down saves

any new macros that you’ve recorded onto the built-in compact flash.

One more troubleshooting hint: Even though in terminal mode your

MinIT does not display the window manager, it is running in the

background, you just can't get to it from this unit without the

password. You can, however, get to it from a PC running the

MinitMan manager. Select the Unit and click Desktop and your

Windows desktop computer will show you the MinIT5250 desktop.

From there, you can use all of the Administrative configuration

functions. See the MinitMan Manager CD for more information.

Connecting the nit

Connecting the nitConnecting the nit

Connecting the nit

MinIT Notes:

1. Use only the power supply provided with the unit. The

use of any other power supply may damage the unit.

The Power Button on the top of the unit will be lit (white)

when there is power to the unit. The unit will not start

until you press the button. Then it will turn green.

3. The correct way to power down the unit is from the

Start button or the MinIT Root Menu. See the

Technical Support section of the manual for more

information.

4. The USB ports on the front of the unit support USB

Keyboard or Mouse.

The headphone jack can be used for powered speakers

or amplified headphones.

Power

Video

Mouse

Keyboard

Parallel

(local printer)

Ethernet

Getting Around the Desktop

Getting Around the DesktopGetting Around the Desktop

Getting Around the Desktop

There are two ways to move around the Desktop – using the keyboard or

using the mouse.

Text Terminal Mode

Text Terminal ModeText Terminal Mode

Text Terminal Mode

One of the choices in the Setup 5250 Sessions Menu is the option to force

the Minit 5250E into what we call the “Text Terminal ONLY Mode”.

The Text Terminal ONLY Mode makes the Minit 5250E operate very much

like a twinax terminal. There can still be multiple sessions configured, but

the user does not see the windows-style desktop. All they would see is a

full screen 5250 terminal session.

If there are multiple sessions configured and running, you can get to each

one by using Alt+F1, Alt+F2, Alt+F3, Alt+F4 and Alt+F5 to jump to each of

the 5 display sessions.

Alt+F12 will take you to a small menu, with extremely limited options. If you

have configured the Minit 5250e to run in Text Terminal ONLY mode, then

this is the path you need to take to get into the Window Manager and the

Administrative Menu, should you need to reconfigure the unit for some

reason. This option is password protected to prevent curious workers from

accidentally reconfiguring the unit. For more on the Administrative

password, see the Unit Information section of the manual.

Note: In Text Terminal Mode there are a few shortcut keys that you may

need to use:

Alt+r = Record Macro (start and stop)

Alt+p = Play Macro

Alt+c = the Cent sign

Alt+e = the Euro symbol

From a “Text Mode Only” session, the proper way to shut down the Minit

5250E is to hit Alt+F12 to take you into the menu, then hit p and Enter. This

does an “orderly” shutdown, and saves any new macros that may have

been recorded since the last time the unit was shut down.

Configuring the Minit 5250E for Text Terminal ONLY Mode

In order to get your MinIT working as a terminal you must first configure your

network settings and your Display and Printer Sessions. All of this is

covered in the Configuration section.

We recommend that you leave your MinIT configured as a Graphical

Terminal until all of your sessions are working the way you want. Then you

can convert it to a Text only terminal with following three steps:

Usin the Mouse

Left Click once on an object (field, button or window) to select the item.

Click on Start Button or Left Click in the desktop area to bring up the

MinIT Root Menu (Help, Configuration, Display Sessions, Printing,

Calculator, Power Down, etc.)

The dark blue title bar will identify the active window across the

top. Inactive windows will have a ray title bar across the top.

Windows can be moved (dra by the Title Bar) or resized ( rab a

corner and dra ).

The buttons on the right side of

the Title Bar control the window

Window

Title Bar

Minimize Maximize Close

Macro Recording and Playback

Macro Recording and PlaybackMacro Recording and Playback

Macro Recording and Playback

You can assign keyboard Macros to function keys F1 – F24.

Note: the Record and Play keys on the lower left of the 122-key twinax

style keyboard are functional in the window mode. If you are in a Text mode

session, however, use Alt+r and Alt+p for Record and Play.

Hit the Record key (or Alt+r), then the selected Function key (F1-F24), and

then start entering the keystrokes that you’d like to record. When finished,

hit the Record key (Alt+r) again to stop recording.

To play a macro, hit the Play key (or Alt+p), then the function key (F1-F24).

On a PC (104 key) keyboard, use the Alt+r and Alt+p short cuts to assign

Macros to the function keys F1-F12.

F(x) refers to the function keys F1-F12

Alt+R+F(x) = Record Macro F(x)

Alt+R = Stop recording

Alt+P+F(x) = Play Macro F(x)

While you are in record mode an R will appear on the bottom of the screen,

along with a counter and the Function key that the Macro is being recorded

to.

R 0000 F01

In this example, we

are recording a

macro to Function

key F1.

Using the Keyboard

Function Keystroke(s)

To get to a particular window Alt + Tab (hold down the Alt key

and hit the tab key until the

window you want is highlighted,

then release).

To move between fields Tab

MinIT Root Menu Alt + Shift +F1

If there is an underlined letter on a button, it is a keyboard shortcut to

that button. For example,

Hit D to go to Done

The MinIT Start Menu

The MinIT Start Menu is the key to most of the functions of the MinIT 5250E.

Click on the desired menu item or use the underlined keyboard shortcut.

Menu Item Function

Getting Started Help overview

MinIT Administration Configuration of the unit

Print Queue Shows status of Printer Sessions and any print

jobs outstanding. Cancel print jobs here.

Display Session Status Shows status of all defined Display Sessions.

Process Monitor For diagnostic use. Displays all active

processes running on the MinIT.

Set Time/Date Sets the Clock (lower right corner of Desktop)

Calculator Brings up a calculator

Exit Restarts the MinIT software (partial restart)

Reboot Full Reboot of the unit

POWER Down Always use this method to turn off the unit.

PC Style Keyboards

There are a number of special 5250 keys that are not present on a standard

104-key PC Style Keyboard. If you are using a PC style keyboard you can

still use these functions by hitting the following shortcut key combinations:

F1 through F12 = F1 through F12

F13 through F24 = Shift + F1 through F12

Enter = Right Control (RCtrl)

Field Exit = Enter

Error Reset = Left Control (LCtrl)

Attn = Esc

Sys Req = Shift+Esc

End = End

Home = Home

Dup = Numpad *

Field - = Numpad –

Field + = Numpad +

Roll Up = Page Down

Roll Down = Page Up

Record = Alt+r

Play = Alt+p

¢ = Alt+c

Euro symbol = Alt+e

Help = Alt+h

Zoom in (bigger font) = Shift+Numpad+

Zoom out (smaller font) = Shift+Numpad-

Again, if you wish to remap the keyboard to better suit your particular needs,

the keyboard mapping utility is to be found under Keyboard within the Minit

Administration Menu.

You can call up the MinIT

Start Menu by Clicking on

the Start Button, by clicking

on the Desktop, or by using

Alt+Shift+F1.

Hint: If a letter in the Start

Menu is underlined, it is

keyboard shortcut to that item.

For instance, hit P to jump to

Print Queue. (Hit P again to

jump to Process Monitor).

Operation

Operation Operation

Operation

Usin the 122-Key Twinax Style Keyboard

The 122-key Twinax Style Keyboard includes many special keys for use in

AS/400 applications, such as Function keys 1-24, Help, Roll up, Attn, Sys

Req, Field Plus, Record and Play, etc. For the most part the 5250 functions

are indicated on the key cap in blue.

Attn = Esc

Sys Req = Shift+Esc

Screen Print = Print Screen key (above the Print key)

Erase Input = Clear

Dup = Shift+Insert

There are also a couple of keyboard shortcuts that might come in handy.

Zoom in (bigger font) = Shift+Numpad+

Zoom out (smaller font) = Shift+Numpad-

Euro Symbol = Alt+e

If you are running a session in Text Terminal Mode (see Setup 5250 Sessions), there are three

more keyboard shortcuts that you may need to use:

Alt+R for Record Macro (start and stop)

Alt+P for Play Macro

Alt+c to get the cent sign (¢).

Should you wish to customize

your keyboard mapping, you can use

the mapping utility that is built in to the Minit 5250E. See Keyboard

Settings for more information.

Configuration

ConfigurationConfiguration

Configuration

The Configuration Menu will come up the first time you power up the unit (If

you don’t want it to continue coming up, Click on the Autostart radio button).

Using the mouse to configure the unit is probably the easiest way, but you

can accomplish all the same things using the keyboard if you prefer (tab

through the fields, use the cursor keys and use the underlined keyboard

shortcuts).

Essentially, you will want to go through these configuration items in order.

Each button takes you to a configuration screen that prompts you for the

information required. Each menu has built-in help that will assist you in

filling in the appropriate information.

Unit Information

 The Unit Number is reported to the MinIT Management Software, to

identify this unit on the network. It needs to be a unique number

for the MinitMan Manager to be able to see and manage the

unit. The default value is the last 6 digits of the Mac address.

 Unit Description should be used to help identify the unit, such as the

name of the user, or a location.

 NLynx Management Server is the IP address of the Server from

which to download software updates to this unit.

 If you wish to secure this unit from accidental reconfiguration, you

can set an Administrative Password here.

 Minit.Man port: this is the IP port that the MinitMan Management

software uses to talk to the unit. The default is 18901. Change this

only if you are changing it on the Minit.Man management station as

well.

 Boot to Terminal Mode ONLY. Select this option if you want this

unit to be forced into a straight text 5250 terminal mode, without

access to the windows looking desktop. The access to the x-

window desktop and the Administration menus will be hidden to the

user. An administrator who knows the password can access any of

the desktop or administrative functions.

 Restart MinitMan. You will want to hit Restart if you have changed

any of the parameters of the unit, so that the new information is

reported to the MinitMan manager.

Click on Done when you have completed this page.

Confi ure Printer

You can have up to 3 printers defined to be used as 5250 host printers. For

instance, LP1 can be set up to use a parallel printer, and LP2 and LP3 can

be network printers that are on your network.

• Choose your default Printer – usually LP1 – Then click on Configure

LP1 in order to set the printer up.

For a printer that is locally attached to this MinIT unit (Parallel Port), select

Parallel Port and give the printer a name (optional, but it may help to have a

name that is more meaningful to you than LP1).

If the printer is a network printer, fill in the IP address and give it a name. 13

Andere Handbücher für Minit 5250E

Inhaltsverzeichnis

Andere Ringdale Server Handbücher

Ringdale

Ringdale Minit 5250E Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung