RINSEKIT PRO PAK Bedienungsanleitung
IMPORTANT CARE INSTRUCTIONS
The PRO PAK comes with Super-O zipper lubricant oil to help maintain the
integrity and ease of use for the unit's zipper. Apply as needed.
After every 1-3 uses we recommend drying out your PRO PAK. To do this,
make sure the unit is completely empty, allow the pump to run dry for 30
seconds to get any remaining water out of the hose. Zip open the top of the
PRO PAK. Next, remove the water tank cap to allow any remaining water to
evaporate. There is no need to remove any of the PRO PAK's internal
components. Allow about 4-6 hours for the unit to dry thoroughly.
To clean the internal parts of the PRO PAK, you can run a solution of equal
parts vinegar and water through the unit. A mixture of mild soap and water
can also be used. Be sure to flush the unit with fresh water to ensure all soap
particles are removed from the internal hose.
After several uses, check the water tank cap's O-ring to ensure it is lying flat.
With continuous use, it may fold or slip out of place.
Carrying instructions for the pro pak xl
We recommend carrying the PRO PAK from its backpack straps. The unit
will be about 60lbs when it is completely full of water, but you can
customize the capacity to whatever weight is comfortable for you to
carry.
Use the unit's side handles for easy maneuvering however, DO NOT LIFT
the PRO PAK from a singular side handle when filled with water.
Inhaltsverzeichnis
