Risco LightSYS Bedienungsanleitung
1
2
Note: The buttons on the wireless key fob are sensitive. Kindly handle the fobs with care to avoid false
alarms.
1 Activate
2 Deactivate
Emergency
button if
programmed
3 Partly Activate
4 Starts to flash
when the system
triggers an
alarm/fault
3
How can I activate the alarm?
(All the sensors in the house)
Option 1 (From the panel/keypad)
Press once and you can leave the house from the main door. The system will activate
in the time frame agreed with technician during the installation, so make sure you leave the
house by then.
Option 2 (From the Remote)
Press the button on the Wireless Remote (as indicated in number 1 in the above diagram)
and you can leave the house from the main door. The system will activate in the time frame
agreed with technician during the installation, so make sure you leave the house by then.
How can I partly activate the alarm? (Some of the sensors in the house only)
Option 1 (From the Panel)
Press once. If you are asked for the code, press your pin number and the system will
activate after the time frame agreed with technician during the installation, so make sure you
leave the activated area by then.
Option 2 (From the Remote)
Press the blank button (number 3 on the above diagram) on the Wireless Remote and the
system will then activate after the time frame agreed with technician during the installation, so
make sure you leave the activated area by then.
4
How can I deactivate the alarm? (All the sensors in the house)
Option 1 (From the Panel)
Input the code and Press
Option 2 (Using the Tag)
Place the token in front of button number 5.
Option 3 (From the Remote)
Press the button on the Wireless Key fob (As indicated in number 2 of the above diagram)
How do I Add, change or delete a passcode or tag from the system?
Add/Change the Pin Code:
Press once then press your pin code and
Press button x3
Confirm that the menu is on Codes/Tags
Press once
Confirm that the menu is on Define and press
Using the indicative arrows, scroll to the correct user (from 00 to 29 as set up during
installation) and press
5
Confirm that the menu is on Edit Code and press
Enter new code and press
Press x4 times to return to standby
To Delete a Code:
Press once then press your pin code and
Press button x3
Confirm that the menu is on Codes/Tags
Press once
Confirm that the menu is on Define and press
Using the indicative arrows, scroll to the correct user (from 00 to 29 as set up during
installation) and press
Confirm that the menu is on Edit Code and press –You will see 4 ****
To delete the code press 0000 and press
The screen will display - Accepted
Press x4 times to return to standby
6
Managing your alarm using the Smartphone application
If you would like to activate or deactivate the alarm from your smartphone, slide the tab to:
Partial (Yellow) to partly activate the alarm when you are at home
Armed (Red) to activate the alarm before you leave home
Disarmed (Green) to deactivate the alarm when you are at home.
For further instructions on how to use other features of the application, call our customer care
and we will guide you accordingly.
7
How do I know what is the fault in my system when the panel signals a fault notification?
In the event of a System Fault, the fault Led will flash on the main panel as indicated on
number 4 (on the above diagram) and the and the symbols flash on the screen.
To view the fault press left bottom button, enter code and press
Press down arrow button x2 and x2 and the system will indicate the issue.
Press left bottom arrow x3 to return to standby.
In case of assistance, call our Aftersales team and we will guide you accordingly.
If I am in a panic situation and I need to call for help, what can I do?
Press both for 3 seconds together and the system calls the police or alerts our
Central Monitoring System if applicable.
If the alarm rings, how can I know which sensor triggered it?
Enter pin code
Press and down arrow to know which sensor has triggered the alarm.
What do I have to press if there is a power cut to make sure that my alarm is set properly
when the electricity is back on?
The system acknowledges the fault and restores back to normal automatically.
8
How long does my battery backup last in the event of a power fail?
Usually for approximately 8 hours. It also depends if a maintenance service has been done in
the last 2 years.
I am thinking about changing my telephone provider, will it affect my alarm system?
It is very important to speak to Alberta technical representative to guide you way forward.
Can I add additional devices to my existing alarm systems and how do I go about doing so?
Yes, but it is ideal to speak to one of our representatives to know which is ideal for you.
Can I order a single alarm remote?
Yes this alarm system can take up to 16 Remotes.
Keep in Mind! Service your alarm at least once every two years to
make sure that the system is functioning properly.
9
Andere Handbücher für LightSYS
13
Andere Risco Sicherheitssystem Handbücher
Risco
Risco LSC AGILITY 4 Bedienungsanleitung
Risco
Risco lightsys 2 Bedienungsanleitung
Risco
Risco ProSYS Plus Bedienerhandbuch
Risco
Risco LightSYS 2 Series Montageanleitung
Risco
Risco ProSYS Plus Gebrauchsanweisung
Risco
Risco Agility 4 Bedienungsanleitung
Risco
Risco Agility 4 Bedienungsanleitung
Risco
Risco LightSYS Betriebsanleitung
Risco
Risco ProSYS 16 Bedienungsanleitung
Risco
Risco LIGHT SYS 2 Gebrauchsanweisung
Risco
Risco Agility 3 Benutzerhandbuch
Risco
Risco ProSYS Betriebsanleitung
Risco
Risco Agility 3 Bedienungsanleitung
Risco
Risco LightSYS Montageanleitung
Risco
Risco ProSYS Plus Montageanleitung
Risco
Risco LightSYS Benutzerhandbuch
Risco
Risco lightsys 2 Gebrauchsanweisung
Risco
Risco Agility 3 Bedienungsanleitung
Risco
Risco Agility 3 Bedienungsanleitung
Risco
Risco ProSYS series Betriebsanleitung
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung