Do not place the product near a magnet or areas with strong
magnetic fields.
It may damage the product or cause malfunctions.
Check the condition of the product and recording quality on
regular basis.
Make sure that the Micro SD card inserted in the product is
working properly. If any problems are found, stop using the
product and contact Customer Support.
This product supports Micro SDHC cards (4 to 32 GB, class
6 or higher).
To install a product to a constant power source of your
vehicle, always seek help of a trained professional.
Always backup the important data to an external storage
medium.
Always backup the important data to an external storage
medium.
Your vehicle’s battery may be fully discharged if your car is
parked for an extended period of time.
Please use only genuine Micro SD card provided by the
manufacturer.
Use of third-party Micro SD cards may cause data loss or
damage the product.
Always check the correct side of the Micro SD card when
inserting, and insert it all the way.
If the Micro SD card is not inserted correctly, it may cause the
product to malfunction.
When removing the Micro SD card from the product, turn off
the power and make sure that Power LED is turned off.
Removing the Micro SD card while power is on may cause
data loss, data corruption or product malfunction.
Do not disassemble or modify Micro SD card.
Such actions may cause data loss or damage the product.
Your Micro SD card is a consumable product with a limited
lifespan. After a certain period of time, the memory card may
be too damaged to recording videos properly.
Frequently check the recordings and format the Micro
SD card at least once a week (File System: FAT32). If the
memory card cannot function properly, please replace it with
new one.
You should always backup important data to another storage
medium.
If the data must be preserved for a long period of time,
always backup the data to an additional storage medium.
When purchasing or using a new Micro SD cards, make sure
that the Micro SD card size is supported by the product.
This product supports Micro SD cards up to 32 GB and Class
6 or higher.
Static in the Micro SD card slot may temporarily suspend
the product’s operation. In such case, the product will
automatically resume operation in 2 to 3 minutes.
The product can also be reset manually by pressing Reset
button.
Micro SD card is an essential part. Please read the following instructions carefully. The manufacturer will not take any liability
concerning loss of data or damage to Micro SD card.
Cautions
Manufacturer is not responsible for product damage and loss of data due to potential product malfunction brought on by
an accident or any other event.
Note
