ROBAND HE900 Bedienungsanleitung
27/06/2016
Manufactured By
ROBAND AUSTRALIA PTY LTD
OPERATING INSTRUCTIONS
INFRA-RED HEATING ASSEMBLIES
Models
HE900, HE1200, HE1500, HE1800
Version 1
Includes
International models:
…-Gxx and …-Fxx
Fabricator models:
HUE…
Special Features:
Variable Heat Control
Stylised Design
Long-Life Metallic Elements
These instructions cover the models of ROBAND®Heat Lamps only. Although there are slight
variances between models, the installation, operation, care and maintenance procedure is the
same for all.
®
®
®
CONTENTS
INTRODUCTION.....................................................................................................1
GENERAL PRECAUTIONS.....................................................................................1
PACKAGING ...........................................................................................................2
.........................................................................................................2
HUE SERIES FABRICATOR MODELS...................................................................3
INSTALLATION.......................................................................................................4
MOUNTING PROCEDURE –STANDARD MOUNTS..............................................4
ELECTRICAL CONNECTION..................................................................................6
OPERATION............................................................................................................7
GENERAL SAFETY.................................................................................................8
CLEANING, CARE & MAINTENANCE ....................................................................9
ELEMENT REPLACEMENT..................................................................................10
TROUBLESHOOTING...........................................................................................10
SPECIFICATIONS.................................................................................................11
HE SERIES CIRCUIT DIAGRAM...........................................................................12
HUE SERIES CIRCUIT DIAGRAM........................................................................13
NOTES:.................................................................................................................14
EC DECLARATION OF CONFORMITY.................................................................15
WARRANTY..........................................................................................................16
Page: 1
INTRODUCTION
Congratulations on your purchase of this quality ROBAND®product. With proper
care and management your new purchase will give you years of trouble free
service.
By reading these instructions carefully you can ensure that this machine is used
and maintained properly, helping your new investment to perform well for you now,
and to continue performing in the many years to come.
GENERAL PRECAUTIONS
This machine must only be operated by qualified person(s) who are fully versed in the
operating and safety instructions described in this manual. Operators should be
instructed to familiarise themselves with any and all safety instructions described in
this manual prior to commencement of any maintenance or service.
In the case of new personnel, training is to be provided in advance. These
machines should not be operated by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience or knowledge,
unless they are being supervised or being instructed concerning the safe use of the
appliance by a person responsible for their safety.
These machines are heating units, and as with any commercial heating unit the
surfaces on these Heating Assemblies will get very hot. Always be careful
when near an operating Heating Assembly, and ensure that any risk to unwary
customers or staff is minimised with additional signage if necessary. Due to the
obvious heat hazard Roband recommends that these units be kept out of reach of
children.
The performance of this unit cannot be guaranteed for operational use outside its
design parameters. These Heating Assemblies are designed mainly for the heating
and warming of food. They are not designed for the cooking of food.
The machine should be disconnected from all power and allowed to cool before
cleaning.
ROBAND WILL ACCEPT NO LIABILITY IF;
Non-authorised personnel have tampered with the machine.
The instructions in this manual have not been followed correctly.
Non-original spare parts are used.
The machine is not cleaned correctly, with the right product.
There is any damage to the unit.
Page: 2
PACKAGING
Roband ensures that every unit is functional and undamaged at the time of
packaging, and all care is taken.
The Package of this Heating Assembly should include:
1) One Heating Assembly (appropriate model)
2) This Manual
3) Packaging Materials
Any damage to the machine as a result of freight must be reported to the Freight
Company and to the agent responsible for the dispatch of said unit within 24 hours of
receipt. No claims will be accepted or entertained after this period.
RCM:
Roband®products have been designed and manufactured to comply with any and
all specifications set out by the Australian Communications and Media Authority
(ACMA) in regards to Electromagnetic Compatibility. As testament to such
compliance these units bear the RCM symbol.
For further information contact the Australian Communications Authority, PO Box
13112, Law Courts, Melbourne VIC 8010.
CE:
Roband®products bearing the CE compliance mark have been designed and
manufactured to comply with European Standards and Directives. A copy of the
CE Declaration of Conformity is located at the back of these instructions.
Page: 3
HUE SERIES FABRICATOR MODELS
If your unit is a standard HE model, please ignore the details in this section and
proceed to the next section.
HUE units are provided without switches, energy regulators or control boxes. They
are designed for fixed installation and should be hard wired by a trained technician or
electrician in accordance with applicable standards. Installations must include
accessible dual pole disconnection of mains supply, and desired temperature
regulating device if required. Product is supplied with 1500mm long Active, Neutral
and Earth wiring which extends outside the Heating Assembly and does not include a
power plug or cord.
Operation of the appliance is to be determined in conjunction with the selected
installation method and is the responsibility of the installer.
Please note that the energy regulator & knob are available for sale separately if
required.
All HUE units are suited to 220-240V AC 50-60Hz Power supply.
These units will get very hot during operation. For this reason it is recommended
that all care be taken to avoid damage or injury during operation. All surfaces on
these units will be hot when in use.
As these Heating Assemblies are intended for use by OEM manufacturers and their
application and installation are beyond Roband control, they are covered by a
limited warranty against faulty workmanship and materials for a period of 12 months
from date of purchase. All goods that are claimed under this warranty must be
returned to the factory, freight prepaid, for inspection. Any part deemed to be
defective will be replaced, however, no claims will be entertained for parts damaged
in transport, misused or modified in any way without our approval.
For HUE series Heating Assemblies please continue to read this manual in
full, ignoring any reference to the control box, energy regulator, cord and
plug that is present on other models.
Page: 4
INSTALLATION
Remove all the packaging materials and tape, as well as any protective plastic from
the machine. Clean off any glue residue left over from the protective plastic or tape
using methylated spirit.
These Heating Assemblies are designed for mounting above food serving and
preparation areas to provide HEAT without illumination.
We recommend mounting heights between 320mm and 450mm above the products
to be heated. Note; The lower the mounting height the smaller the heated area will
be and the higher the temperature. The higher the mounting height, the larger the
heated area but the lower the temperature.
Warning
These units must not be installed near flammable materials or near surfaces
that could be adversely affected by high temperatures. The area immediately
above the Heating Assembly will become very hot when in operation.
MOUNTING PROCEDURE –STANDARD MOUNTS
Page: 5
Page: 6
ELECTRICAL CONNECTION
Make certain that any excess cord length is kept away from the Heating
Assembly body and out of the heated area.
AUSTRALIAN MODELS (HE…)
All Models come with a 1.8m power cord and will plug into a single phase, 10 Amp
power point.
EXPORT MODELS (HE…-UK AND -F)
Both models come with 1.8m cord. -UK Models will plug into a standard 13 Amp
United Kingdom (Type G) power point. –F Models will plug into a standard 16 Amp
European (Type E or F) power point.
FABRICATOR MODELS (HUE...)
For HUE Series a suitably qualified technician/electrician must connect the lamps to
the electrical supply in accordance with relevant installation standards. Please see
Page 3 for further details.
Page: 7
OPERATION
After the heat lamps have been installed, the unit is operable and temperature
controlled through the use of the energy regulator which is mounted on the outside
of the switch box (HE series only).
The Energy regulator is used to control the temperature output of the heating
assembly from approximately 10% of the total power on low setting to 100% of the
power on maximum setting.
These units will get very hot during operation. All care should be taken to
avoid operation where in areas where contact is likely to occur. All surfaces
on these units will be hot when in use.
As these Heating Assemblies are intended for use by equipment manufacturers
and their application and installation are beyond our control, they are only covered
by a limited warranty against faulty workmanship and materials for a period of 12
months from date of purchase. All goods that are claimed under this warranty must
be returned to the factory, freight prepaid, for inspection. Any part deemed to be
defective will be replaced, however, no claims will be entertained for parts damaged
in transport, misused or modified in any way without our approval.
Dieses Handbuch passt für folgende Modelle
7
Inhaltsverzeichnis
Beliebte Heizung Handbücher anderer Marken
Empire Heating Systems
Empire Heating Systems WCC65 Bedienungsanleitung
Wetekom
Wetekom 92 86 43 Bedienungsanleitung
Desa
Desa SPC170-F Bedienungsanleitung
Watlow
Watlow Watrod Electric Tubular Heaters Bedienungsanleitung
Haverland
Haverland ECO-DRY GPS Series Stücklistenhandbuch
Stelpro
Stelpro ASILVC2060 Series Bedienungsanleitung