Robe PATT 2013 Bedienungsanleitung

User instructions

PATT 2013

The PATT 2013 is a 750W tungsten softlight housed in a sleek spun aluminium body which maximises its

curves to look as good on stage as the performers it illuminates.

Safety and operating instructions

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this

manual or any unauthorized modication to the device.

Please consider that damages caused by manual modications to the device are not subject to warranty.

During the operation the housing becomes very hot (up to 160°C). Allow the device to cool

approximately 40 minutes prior to manipulate with it.

Min. distance from ammable materials to all exterior surfaces of the luminaire is 0.5m

Make sure that the available voltage is not higher than stated on the device.

Make sure that the power cord is never crimped or damaged by sharp edges. Check the device and the power-

cord from time to time.

Always disconnect from the mains, when the device is not in use or before cleaning it.

This device falls under protection class I and therefore must be earthed.

The electric connection, repairs and servicing must be carried out by a qualied employee.

During the initial start-up some smoke or smell may arise. This is a normal process and does not necessarily

mean that the device is defective.

Do not touch the device’s housing bare hands during its operation (housing becomes hot)!

For replacement use lamp of the same type and rating only.

Disconnect the device from mains before re-lamping or any maintenance/cleaning operations. Allow to cool

cca 40 minutes.

CAUTION ! EYE DAMAGES !

Avoid looking directly into the light source

This device was designed for indoor use only.

This device is for professional use only. It is not for household use.

When choosing the installation spot, please make sure that the device is not exposed to extreme heat, moisture

or dust !

The device never must be covered with cloth or other materials during its operation.

The minimum distance between light output of the and the illuminated surface must be more than 3 meters.

Only operate the xture after having checked that the housing is rmly closed and all screws are tightly fas-

tened.

The maximum ambient temperature 45°C must never be exceeded.

Technical specications

Mains input: 115 V for HPL 750/115 V LAMP

120 V for HPL 750/120 V LAMP

230 V for HPL 750/230 V LAMP

240 V for HPL 750/240 V LAMP

Frequency: 50-60Hz

Max. power consumption: 750W

Lamp base: G 9,5 Special (with heat sink)

Cooling: convection

Max. Surface temperature: 160°C

Min. distance from ammable materials: 0.5 m

Min. distance to alight object: 3 m

Max. ambient operating temperature: 45°C

Weight: 7.2kg

Beam angle: 17°(@1/2 beam), 75° (@1/10 beam)

Dimensions:

Preliminary version

August 12, 2015

Specications are subject to change without notice.

Beam distribution:

Inhaltsverzeichnis

Andere Robe Scheinwerfer Handbücher

Robe

Robe Robin BFML Bedienungsanleitung

Robe

Robe Spot 575 XT Bedienungsanleitung

Robe

Robe Color Spot 1200 AT Bedienungsanleitung

Robe

Robe CitySkape Xtreme Bedienungsanleitung

Robe

Robe Color Wash 575E AT Bedienungsanleitung

Robe

Robe Digital Spot 5000 DT Bedienungsanleitung

Robe

Robe ColorSpot 1200E AT Bedienungsanleitung

Robe

Robe Image Spot 250 AT Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

Guangzhou Yinhe Lighting&Sound Equipment Factory

Guangzhou Yinhe Lighting&Sound Equipment Factory NE-204 Bedienungsanleitung

LIVARNO home

LIVARNO home 375304 2101 Originalbetriebsanleitung

Cameo

Cameo CLQS40WW Bedienungsanleitung

Leviton

Leviton Ellipsoid 5/50 Bedienungsanleitung

Monacor

Monacor img Stage Line PARL-56PDX/CR Bedienungsanleitung

Vector

Vector SL3AKV Bedienungsanleitung

Quantum

Quantum Q262 Betriebshandbuch

Philips

Philips Vari-lite VL3015LT Bedienungsanleitung

EUROSPOT

EUROSPOT C51 Bedienungsanleitung

DTS

DTS MINI BRICK ARC Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation VISIBEAM II Handbuch

ACME

ACME LED-MS350B Bedienungsanleitung

EuroLite

EuroLite Akku flat light 1 Bedienungsanleitung

Commercial Electric

Commercial Electric SPTM-1401 Bedienungsanleitung

Vision & Control

Vision & Control SLB-500-W5K7-P-SL Bedienungsanleitung

Teknik

Teknik FLEXI Bedienungsanleitung

Craftsman

Craftsman CMXLSB10 Bedienungsanleitung

EuroLite

EuroLite LED SLS-144 UV Floor Spot Bedienungsanleitung