Roberts R Line Bedienungsanleitung

Multi-room Smart Speaker with

Music Player and Spotify Connect

and remote control from iPhone and Android

using UNDOK

Please read this manual before use

ROBERTS

Contents

Introduction.........................................................................................1-5

Before you can use this product.......................................................... 1

About this instruction manual............................................................... 2

Controls and connections................................................................. 3-5

Setup....................................................................................................6-9

Step 1 - Download the UNDOK app.................................................... 6

Step 2 - Plug in your speaker and switch on for ﬁrst use .................... 7

Step 3 - Setup new audio system - Apple iOS device ......................... 8

Step 3 - Setup new audio system - Android device............................. 9

Internet Radio mode.......................................................................10-13

Internet Radio - the basics................................................................. 10

Selecting internet radio / Presetting internet radio stations ................11

Customising your speaker................................................................. 12

Conﬁguring my favourite stations ...................................................... 13

Conﬁguring my added stations.......................................................... 13

Music Player mode.........................................................................14-21

Use with Windows, Apple Mac, Linux, USB memory ........................ 14

Accessing your audio ﬁles via UPnP using Windows 7, 8, & 10... 15-16

Locating and playing media ﬁles using UPnP .............................. 17-18

Using USB memory devices......................................................... 19-20

Windows 'Play To' / 'Cast to Device' function (UPnP renderer) ......... 21

Spotify Connect..............................................................................22-24

Spotify Connect - the basics.............................................................. 22

Set up a Spotify Connect account ..................................................... 22

Playing music using Spotify Connect ................................................ 23

Controlling Spotify on your speaker................................................... 24

Bluetooth mode..............................................................................25-28

Bluetooth mode ................................................................................. 25

Connecting Bluetooth devices........................................................... 25

Playing audio ﬁles in Bluetooth mode................................................ 26

Connecting and reconnecting a Bluetooth device ............................. 27

Bluetooth information......................................................................... 28

Multi-room mode ............................................................................29-33

Multi-room the basics ........................................................................ 29

Creating and editing a multi-room group with UNDOK...................... 30

Playing audio to a group.................................................................... 31

Volume control using UNDOK ........................................................... 31

Mode indicator and controls in a multi-room conﬁguration................ 32

Stereo mode switch........................................................................... 33

UNDOK settings................................................................................... 34

UNDOK settings / Equaliser / Sleep timer / Friendly name ............... 34

Audio connections.........................................................................35-36

Headphone socket............................................................................. 35

Auxiliary input socket......................................................................... 35

Inactive Standby feature.................................................................... 36

Information......................................................................................37-48

Factory reset...................................................................................... 37

Software version display / Audio FAQ ............................................... 38

Using an Ethernet connection ........................................................... 39

Network indicator status / Software update....................................... 40

Troubleshooting ............................................................................ 41-42

Audio codecs ..................................................................................... 43

Cautions ............................................................................................ 44

Speciﬁcations / Circuit features ......................................................... 45

Software License Information............................................................ 46

Guarantee.......................................................................................... 48

R1 Smart Speaker features

The Roberts R1 provides the following features in an attractive compact unit:-

●Listen to local, regional, national and international broadcasts using

Internet radio.

●Listen to over 1000 radio stations from around the country, and over

10,000 from around the world without using your PC.

●Listen to podcasts from a wide range of broadcasters.

●40 internet radio station presets.

●Use the Music Player to play your music collection from devices on

your network. Connection to Apple and Linux based computers is

also possible.

●Playback of audio ﬁles from USB memory devices.

●MP3, WMA, AAC, FLAC, ALAC (Apple Lossless) and WAV formats

are supported.

●The R1 connects to your home computer network, either using WiFi

or via a wired Ethernet connection.

●Dual band WiFi allows compatibility with a wide range of networks.

●Works with Windows 'Play to' / 'Cast to Device' function (as a Digital

Media Renderer).

●Compatible with Spotify Connect, allowing your Spotify selections

to be played through the speaker, remotely controlled from your

iPhone, iPad, Android device or any Desktop.

●Supports remote control from Apple iPhone, iPad and Android using

the UNDOK app.

●Your speaker may be connected as part of a wireless Multi-room

system to allow whatever source is selected to be heard through

other connected products.

●Bluetooth streaming to play your music or video soundtracks from

your smartphone, tablet or similar device.

●All radio station presets, network conﬁguration details and user

settings are retained in the event of a power failure.

●Adjustable sleep timer, can be set to turn the speaker off after a delay

of up to 60 minutes.

●Power saving Inactive Standby.

●Auxiliary input for playing audio from MP3 players, iPods or other

audio equipment.

●Stereo headphone socket for private listening.

●Mains or battery powered operation using supplied mains adaptor, or

optional battery pack (not included).

Before you can use this product

Before you can use your smart speaker, you must have the following:

●A broadband Internet connection (not required for Music Player functions).

●A router (or equivalent wireless access point) providing a WiFi signal or Ethernet connection, connected to your

broadband Internet Service Provider. The broadband modem, router and wireless access point will often be a

single combined unit supplied by your Internet Service Provider or bought from a computer store.

●A Smart phone or tablet which uses either the Android operating system (version 4.0.3 or later) or Apple iOS

(version 8 or later).

●If your wireless network requires a security password to allow connection, then you either need to know the

WEP, WPA or WPA2 key used for encryption so that you can get the speaker to communicate with the network.

●If you choose to connect the speaker to your network using a wired Ethernet connection, then an Ethernet cable

of appropriate length will be needed.

The speaker's WiFi system is compatible with 802.11b, g, n or a networks and can use 2.4 GHz or 5 GHz WiFi

frequency bands.

If connecting using WiFi, the speaker will typically work within a 10-20 metre radius from your wireless router or

access point. The actual range achieved will depend upon the building type, other nearby wireless networks, and

possible interference sources.

IMPORTANT: Before you continue, make sure that your router (or access point) is powered up and working with

your broadband Internet service (use your computer, smart-phone or tablet to verify this). To get this part of the

system working you must refer to the instructions supplied with those items.

Introduction

About this instruction manual

This instruction manual is split into sections for each of the operating modes of your Roberts

R1 speaker. Each section is clearly identiﬁed by the shaded heading in the top right hand

corner of each pair of pages.

Before using the Internet Radio and Music Player functions, you will need to connect your

speaker to your computer network using either the WiFi or Ethernet connection. This is

covered in the section titled Setup.

The InternetRadiosection describes how to ﬁnd radio stations to listen to. These can be radio

stations that you already know and listen to conventionally, or new stations you may search for.

You may set up stations that you like as Favourites so that they are more readily accessible.

The section for the Music Player describes how you may play music ﬁles that you may have

stored on a computer or other devices connected to your network. The use of Shared Media

(using UPnP) and USB playback is explained.

The Spotify Connect section explains the use of the speaker in conjunction with the Spotify

internet based music streaming service.

The Bluetooth section describes how to use your R1 to play audio ﬁles or video soundtracks

directly from your smartphone, tablet or similar devices.

The Multi-room section explains how your speaker may be connected as part of a wireless

music system.

The UNDOK Settings section explains how to modify settings for your speaker including

equaliser and sleep timer.

The Audioconnectionsection shows how to connect your speaker to other audio equipment.

The Information section includes troubleshooting, speciﬁcations and warranty information.

(page 6)

(page 10)

(page 22)

(page 14)

(page 25)

(page 35)

(page 37)

Internet Radio

Setup

Audio Connections

Information

(page 29)

Multi-room

Music Player

(page 34)

UNDOK Settings

Spotify Connect

Bluetooth

Standby Network Mode

R1 wireless stereo speaker

Controls and connections

Top view

1. Mode / Bluetooth Pair button

2. Next button

3. Previous button

4. Play / Pause / Reset button

5. Volume Up button

34567

6. Volume Down button

7. On / Standby button

8. Standby indicator

9. Network Status indicator

10. Mode / Bluetooth Pairing indicator

9 10

Introduction

Controls and connections - cont.

Rear view

11. Headphone socket

12. Auxiliary Input socket

13. Stereo mode switch

14. USB playback socket

15. Ethernet socket (RJ45)

16. DC input socket

11 12 13 14 15

Side view

17. Tweeter / Mid-range speaker x 2

18. Bass speaker

19. Bass port

Controls and connections cont.

The best way to control your speaker is by using the UNDOK app. However

you can also use the buttons on your R1 for the following functions.

1. Pressing the On/Standby button brings your speaker out of Standby

mode.

Pressing the On/Standbybutton while the speaker is in use will cause

it to return to the Standby mode. The Standby indicator will light.

2. Press and release the Mode button to select the desired operating

mode, Internet Radio, Spotify, Music Player, Bluetooth orAuxiliary Input.

The Mode indicator will change colour according to the music source

selected (see page 32).

Instructions for each operating mode are given in the later sections

of this book.

3. You can control music playback using the Play/Pause,NextorPrevious

buttons on the speaker.

4. You can control the volume using the Up and Down Volume buttons

on your speaker.

Note: You will need to use the UNDOK app to select your choice

of content for most operating modes.

Setup

• iOS - Download from Apple App Store

• AndroidTM - Download from Google Play Store

• If you already have the UNDOK app installed on your device ensure that you have the latest version.

• It is possible that this app may have been changed slightly since these instructions were written.

• Please refer to the Roberts Radio website for guidance on how to use the latest version.

Note: At the time of writing Android version 4.0.3 and later or iOS version 8 or later are required to use UNDOK.

Step 1 - Download the UNDOK app

Download and install the UNDOK app on to your Android or iOS device.

Step 2 - Plug in your speaker and switch on for ﬁrst use

1. Place your speaker on a ﬂat surface and plug the cable from the mains

adaptor into the DC input socket located underneath the speaker (marked

'DC In') ensuring that the plug is pushed fully into the socket.

2. If you wish to use a wired network connection, plug the Ethernet cable into

the RJ-45 socket at the back of the speaker.

3. Ensure that the Stereo mode switch is in the centre 'Auto' position.

4. Plug the mains adaptor into a wall socket and switch on the socket.

IMPORTANT: The mains adaptor is used as the means of connecting the

speaker to the mains supply. The mains socket used for the speaker must

remain accessible during normal use. In order to disconnect the speaker

from the mains, the mains adaptor should be removed from the mains

socket outlet completely.

5. When you apply the power the Standby, Network Status and Mode

indicators will all light brieﬂy.

6. If this is the ﬁrst time that you use your speaker or after a factory reset, after

several seconds the Network Status indicator will ﬂash slowly indicating

that your speaker is now ready to connect to your home network.

• After each use the speaker will remember the mode used and then switch

on in that mode the next time it is used.

Note: If your speaker has not previously been connected to a network,

the Network Status indicator will ﬂash slowly. If this is not the case please

reset the speaker see page 37.

7. Use the UNDOK app to connect your speaker to your network. If adding

more than one product this must be done for the ﬁrst time each product is

used.

Standby Network Mode

Speaker ready to connect

Inhaltsverzeichnis

Andere Roberts MP3-Player Handbücher

Roberts

Roberts R100 Bedienungsanleitung

Roberts

Roberts Stream 104 Bedienungsanleitung

Roberts

Roberts Sports DAB 5 Bedienungsanleitung

Roberts

Roberts CD9989 Bedienungsanleitung

Beliebte MP3-Player Handbücher anderer Marken

Blaupunkt

Blaupunkt Compact Drive MP3 Bedienungsanleitung

Memorex

Memorex MMP9008 - 8GB USB 2.0 Bedienungsanleitung

Meizu Electronic Technology

Meizu Electronic Technology E5 Bedienungsanleitung

Naxa

Naxa NMV-173NX Bedienungsanleitung

Philips

Philips PSA250 Bedienungsanleitung

Zipy

Zipy go! Waving Bedienungsanleitung

Sylvania

Sylvania SMPK4068 Bedienungsanleitung

Sony

Sony NW-MS7 - Memory Stick Walkman Bedienungsanleitung

Irradio

Irradio RF-42UC Bedienungsanleitung

NABAIJI

NABAIJI SWIM MUSIC 100 Bedienungsanleitung

Laser

Laser MP3-A9-4GB Bedienungsanleitung

Samsung

Samsung YP-T7F Bedienungsanleitung

Savant

Savant SMS-1001-00 Kurzanleitung

Trevi

Trevi XP 71 BT Bedienungsanleitung

MobiBlu

MobiBlu DAH-1500i Bedienungsanleitung

Denver

Denver MPS-201 Bedienungsanleitung

Steren

Steren MP3-002 Bedienungsanleitung

Kenwood

Kenwood M1GD50 Bedienungsanleitung