Robin CycFX 4
3
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE POWERING OR INSTALLING YOUR Robin CycFX 4!
S ve it for future reference.
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a
safe operation, it is absolutely necessary for the user to follow the safety instructions and warnin notes written in
this manual.
The manufacturer will not accept liability for any resultin dama es caused by the non-observance of this manual
or any unauthorized modification to the device.
Please consider that dama es caused by manual modifications to the device are not subject to warranty.
1. Safety instructions
DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!
Make sure that the available volta e is not hi her than stated on the rear panel of the fixture.
This fixture should be operated only from the type of power source indicated on the markin label. If you are not
sure of the type of power supplied, consult your authorized distributor or local power company.
Always disconnect the fixture from AC power before cleanin , removin or installin the fuses, or any part.
Do not overload wall outlets and extension cords as this can result in fire or electric shock.
Make sure that the power cord is never crimped or dama ed by sharp ed es. Check the fixture and the power cord
from time to time.
Do not install the unit near naked flames.
Durin the operation the housin becomes hot
Refer servicin to qualified service personnel.
This fixture falls under protection class I. Therefore this fixture has to be connected to a mains socket outlet with
a protective earthing connection.
Do not connect this fixture to a dimmer pack.
LED light emission. Risk of eye injury.
Do not look str ight t the fixture´s LEDs during oper tion. The intense light be m m y d m ge your eyes.
Keep compustible materials at least 20 cm away from the fixture.
If the fixture has been exposed to drastic temperature fluctuation (e. . after transportation), do not switch it on
immediately. The arisin condensation water mi ht dama e your device. Leave the device switched off until it has
reached room temperature.
Avoid brute force when installin or operatin the fixture.
The fixture was desi ned for indoor use only.
