Robustel GoRugged M1000 Bedienungsanleitung

Robustel GoRugged M1000 USB Quick Guide

RT_QG_M1000 USB _v.1.0.0 25.01.2014 1 /7

Robustel GoRugged M1000 USB Quick Guide

Chapter 1. Interface Introduction

1.1 Overview

1.2 LED Indicators

After inserting the SIM card into the modem and power on, the LED indicator’s status should be as follow when work

normally:

Name

Function

NET

Registered to the network: 75 ms on / 3 s off

Note

：

Please refer to Robustel GoRugged M1000 USB User Guide to get more details about the LED indicators.

1.3 USB Interface

USB Cable connector (Type A Male to Type A Male)

USB 2.0 Connector

Description)

VCC

Data (D-)

Data (D+)

GND

Robustel GoRugged M1000 USB Quick Guide

RT_QG_M1000 USB _v.1.0.0 25.01.2014 2 /7

1.4 Grounding the Modem

Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Run the ground

connection from the ground screw to the grounding surface prior to connecting devices.

Note: This product is intended to be mounted to a well-grounded mounting surface, such as a metal panel.

1.5 Power Supply

The power supply range is 9 to 36VDC.

Note: Please take care about the polarity, and do not make reverse connection.

Chapter 2. Hardware Installation

2.1 Insert/Remove SIM Card

SIM card is used for connecting to cellular network, you need buy SIM card from local operators.

Note:

1. Don’t pull out the SIM holder without pushing the eject button.

2. Don’t touch the metal surface of the SIM card in case information in the card is lost or destroyed.

3. Don’t bend or scratch your SIM card. Keep the card away from electricity and magnetism.

4. A SIM card set with PIN code cannot be used normally in the gateway without the correct PIN code.

5. Make sure to disconnect the power source from your modem before inserting and removing your SIM card.

Positive Polarity

Negative Polarity

Grounding Screw

Robustel GoRugged M1000 USB Quick Guide

RT_QG_M1000 USB _v.1.0.0 25.01.2014 3 /7

2.2 Connect the External Antenna (SMA Type)

Connect this to external antennas with SMA male connector. Make sure the antenna is for the correct frequency as

your GSM operator with impedance of 50ohm, and also connector is secured tightly.

2.3 Power On and Connect with PC

User can use the USB cable to connect the modem’s USB Connector to external slave devices / controller / computer.

Note: User needs to install relevant USB driver to PC, which you can find out in the CD.

Chapter 3. Operate the Modem

3.1 Install USB driver

1. In the Control Panel, when you install USB cable to PC, it will popup tab Other devices and show M1000 USB’s

Robustel GoRugged M1000 USB Quick Guide

RT_QG_M1000 USB _v.1.0.0 25.01.2014 4 /7

module version.

2. Right-click to enter Properties and then click Update Driver.

3. Click Browse my computer for driver software.

Robustel GoRugged M1000 USB Quick Guide

RT_QG_M1000 USB _v.1.0.0 25.01.2014 5 /7

4. Click Browse to locate the position of the USB driver which can be found out in the CD, then click Next.

5. After succeeding to install the USB driver, it will popup the following window.

6. A simulated virtual COM port which binds to the USB interface of M1000 USB will open after USB driver has been

installed. Please check “Device Manager”-> “Modems”.

Robustel GoRugged M1000 USB Quick Guide

RT_QG_M1000 USB _v.1.0.0 25.01.2014 6 /7

7. Select the USB modem and right-click to enter “Properties”. In tab “Modem”, you will find that there is simulated

COM port which serial software such as secureCRT needs to connect to.

3.2 Start SecureCRT

We can enter AT commands to configure M1000 USB from serial software such as secureCRT, you can download this

software via link: https://app.box.com/s/arkn6xk1asgs1myvuuie.

1. Double click SecureCRT Potable.exe .

2. File->Connect->New Session

Robustel GoRugged M1000 USB Quick Guide

RT_QG_M1000 USB _v.1.0.0 25.01.2014 7 /7

3. Select Protocol as “Serial”.

4. Select the simulated COM port and match the parameters as below, click the “Next” button to finish this session.

Note: You need to disable “RTS/CTS.

5. Configuring the modem with AT command.

Note: Please refer to Robustel GoRugged M1000 USB User Guide to get more details about M1000’configuration.

Andere Handbücher für GoRugged M1000

Inhaltsverzeichnis

Andere Robustel Modem Handbücher

Robustel

Robustel GoRugged M1000 MP Bedienungsanleitung

Robustel

Robustel M1000 Pro V2 Bedienungsanleitung

Robustel

Robustel GoRugged M1000 MP Bedienungsanleitung

Robustel

Robustel GoRugged M1000 Bedienungsanleitung

Robustel

Robustel GoRugged M1000 Bedienungsanleitung

Robustel

Robustel GoRugged M1000 USBV2 Bedienungsanleitung

Robustel

Robustel GoRugged M1000 USB Bedienungsanleitung

Robustel

Robustel GoRugged M1000 Bedienungsanleitung

Robustel

Robustel GoRugged M1000 MP Bedienungsanleitung

Robustel

Robustel GoRugged M1000 MP Bedienungsanleitung

Robustel

Robustel GoRugged M1000 XP Bedienungsanleitung

Robustel

Robustel GoRugged M1000 MP Bedienungsanleitung

Robustel

Robustel GoRugged M1000 UP Bedienungsanleitung

Robustel

Robustel GoRugged M1000 Bedienungsanleitung

Robustel

Robustel GoRugged M1000 Pro Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung