Rockford Fosgate IPod Interface Module Leitfaden

Serial Number: Date of Purchase:

Installation & Operation

Interface Module

for radio Auxiliary Input

Contents

Introduction and Precautions................................... 2

Supported iPod Models ............................................. 3

Installation...............................................................3-4

Operation ................................................................... 5

Troubleshooting ......................................................... 6

Warranty .................................................................... 7

Introduction and Precautions

Thank you for purchasing the Rockford Fosgate Interface Module for iPod.The Interface

Module was designed and manufactured to seamlessly integrate with your vehicle’s factory

system.To get the best performance from this device, read this manual before doing any

type of installation.

Practice Safe Sound™

Continuous exposure to sound pressure levels over 100dB may cause permanent

hearing loss. High powered auto sound systems may produce sound pressure levels

well over 130dB. Use common sense and practice safe sound.

This symbol with “CAUTION” is intended to alert the user to the

presence of important instructions. Failure to heed the instructions can

result in injury, damage to the vehicle or unit damage.

CAUTION:To prevent injury and damage to the unit, please read and

follow the instructions in this manual.We want you to enjoy

this system, not get a headache.

CAUTION:If you feel unsure about installing this system yourself, have it

installed by a qualiﬁed Rockford Fosgate technician.

CAUTION:For your safety, ensure the iPod interface module is mounted

in a location that will not interfere with the proper and safe

operation of the vehicle.

CAUTION:Before installation, disconnect the vehicle battery, both

positive (+) and negative (-) terminals, to prevent damage to

the unit, ﬁre and/or possible injury.

Rockford Fosgate and the Rockford Fosgate logo, are either registered trademarks

or trademarks of Rockford Corporation.

iPod is a trademark of Apple, Inc.

Supported iPod Models

iPod Firmware

For proper operation of the interface module, ensure your iPod is updated with the

latest ﬁrmware. Free updates can be downloaded from http:/www.apple.com/ipod/

download/.The directions on the site will guide you through the update process.

Installation

It is recommended that this installation only be performed by a qualiﬁed professional.

Beware of sharp edges to avoid injury and exercise caution when removing trims as they

may break. Ensure the mounting location does not interfere with the safe operation of the

vehicle (i.e.. near steering, foot pedal controls, parking brake or shifter).

NOTE: Some radios will not have RCA inputs and will require custom installation.

IMPORTANT: Ensure the radio code is available before starting this installation.

1. Be sure to carefully read and understand the instructions before attempting to install

the unit.

2. Disconnect both battery terminals.These cables must be disconnected during

installation to ensure proper initialization of the interface module when it is connected.

3. Carefully remove surrounding trim to access the radio mounting screws. Most trims

can be removed by carefully pulling on the piece or using trim removal tools.Trim is

usually held in place by snap-in clips.

4. Remove the bolts that hold the radio in place. Carefully pull the radio away from

the console.Take care not to damage the wire connections at the back of the radio.

Consult your dealership if additional information is needed on removing the radio.

Installation

NOTE: When routing harnesses or cables, ensure they are secured away from sharp

edges and moving parts by the use of cable ties.

5. Access the AUX port on the back of the radio. Connect the red and white colored

AUX audio connectors into the red and white colored receptacle on the radio. If the

factory AUX port already has something connected, it must be disconnected.

6. Connect the +12V, GND and REM wire leads to their proper sources.

7. Connect the harness to the Power connector on the interface module.

8. Connect the iPod cable to the interface module and carefully route it to the location

where the iPod will be mounted (such as the glove box or center console). If an

additional audio device will also be used (mp3, DVD player, etc.) connect its audio

cable to the 1/8” mini-jack.

9. Verify that all connections have been properly made.

Interface Module iPod Dock Cable Auxiliary

Audio/Power Harness

Red wire - REM - connect to switched power

Black wire - GND - connect to ground

Yellow wire - +12V - connect to +12 volts

Connect to Power

connector on

Interface Module

RCA connectors

RED – Right channel

WHITE – Left channel

(Actual radio appearance may differ from that shown)

REM GND +12V

NOTE: Some radios will not have

RCA inputs and will require

custom installation.

Power

connector

iPod

connector

1/8” Mini Jack

connector

Interface Module

10. Reinstall the radio and reconnect the vehicle battery.Turn the ignition on, connect

the iPod and test the unit. Follow the proceedure in step 11 ‘Gain Adjustment’ before

reinstalling the panels/trim.

NOTE: If an additional audio device is connected through the 1/8”mini-jack, it will become

active when the iPod is disconnected.

11. Gain Adjustment – The potentiometers located on the interface unit are used to

adjust the gain settings for the iPod and AUX jack to properly match the radio’s input

level.We recommend setting the Interface Module output level to match the factory

CD or AM/FM station’s sound level.

NOTE: Use a small phillips head screw driver or a plastic pot adjuster tool to adjust the

potentiometers.

Interface Module

Potentiometer

Adjustment

iPod

gain setting

Mini Jack

gain setting

Decrease

Increase

Operation

Connecting Your iPod

The interface automatically charges the battery of the iPod when

connected and the key is in the ACC/ON position.The charging icon will

appear on the upper right corner of the iPod screen to indicate charging.

NOTE: We recommend disconnecting your iPod when not in use or when the vehicle is

turned off.

CAUTION:Some vehicles supply constant power even when the ignition

is off.To prevent the vehicle battery being drained or possibly

damaged, the iPod MUST be disconnected in these vehicles.

Using the AUX integration

Connect the iPod to the dock cable and select the auxiliary source on the radio.The

charging indicator should appear on the iPod and a selected song will start to play. If an

additional audio device is connected through the 1/8”mini-jack, it will become active when

the iPod is disconnected.

NOTE: Some vehicles require the ignition to be in the on position to provide ACC power.

In this case the interface unit will not function until ignition is turned on.

Charging Icon

Battery Icon

(Actual radio appearance may differ from that shown)

AUX source selector

Problem

Cannot select the interface using the radio.

No audio from iPod source.

iPod does not charge.

Music is distorted or sound level is too low.

No audio from auxiliary device (1/8”mini jack).

Solution

Check all connections.With the ignition OFF

disconnect vehicle harness from module for

a few seconds and reconnect.Turn ignition to

ACC/ON.Verify that the correct button is

used to access the AUX input.

Reset the iPod.Verify proper connection to

iPod/interface.

Check all connections. Reset iPod and make

sure iPod charges while connected to com-

puter or wall charger.

The output gain for iPod and AUX should be

adjusted using the potentiometers

(refer to

Gain Adjustment in ‘Installation’)

Refer to the documentation of the device for

the correct audio output settings.Verify proper

connection to device/interface.

Troubleshooting

Warranty

The Rockford Fosgate iPod Interface Module has a warranty of 1 Year.This warranty

covers only the original purchaser of Rockford product purchased from an Authorized

Rockford Fosgate Dealer in the United States. In order to receive service, the purchaser

must provide Rockford with a copy of the receipt stating the customer name, dealer name,

product purchased and date of purchase.

Products found to be defective during the warranty period will be repaired or replaced (with

a product deemed to be equivalent) at Rockford’s discretion.

What is Not Covered

1. Damage caused by accident, abuse, tampering, improper operations, water, direct sunlight,

excessive heat, theft, shipping.

2. Any cost or expense related to the removal or reinstallation of product.

3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate

Service Center.

4. Any product which has had the serial number defaced, altered, or removed.

5. Subsequent damage to other components.

Limit on Implied Warranties

Any implied warranties including warranties of ﬁtness for use and merchantability are limited

in duration to the period of the express warranty set forth above. Some states do not allow

limitations on the length of an implied warranty, so this limitation may not apply. No person

is authorized to assume for Rockford Fosgate any other liability in connection with the sale

of the product.

How to Obtain Service

Contact the Authorized Rockford Fosgate Dealer you purchased this product from.

If you need further assistance, call 1-800-669-9899 for Rockford Customer Service.

12/08 B.M.

1230-55529-01 Printed in U.S.A

Rockford Fosgate

Rockford Corporation

600 South Rockford Drive

Tempe, Arizona 85281 U.S.A.

In U.S.A., 480-967-3565

Customer Service 1-800-669-9899

Andere Handbücher für iPod Interface Module

Inhaltsverzeichnis

Andere Rockford Fosgate Steuereinheit Handbücher

Rockford Fosgate

Rockford Fosgate iPod Interface Module Leitfaden

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung