Rockville Power Gig RPG122K Bedienungsanleitung

OWNER’S MANUAL

Thank you for purchasing this Rockville Power Gig RPG122K Bluetooth pro

audio speaker system.

We are very proud to bring you what we consider to be the absolute best value line pro

audio speakers. This project has been a culmination of years of development involving

a team of dreamers, engineers, designers and marketing gurus. Proudly conceived and

developed in the USA, Rockville pro audio speakers are designed and engineered by a

team of music enthusiasts, DJ’s and musicians.

We have spared no expense in manufacturing these speakers to meet the highest quality

standards. With proper care and installation this unit will provide you with the highest

levels of sound quality. We hope that this unit will bring you years of performance and

reliability.

Our goal to you and to your audience is to hear “live performance sound” the way it was

meant to be experienced.

Please read this installation guide carefully for proper use of your Power Gig RPG122K

Bluetooth pro audio speaker. Should you need technical assistance during or after your

installation please call our technical help line at 1-646-758-0144, Monday through Friday,

9am to 5pm EST.

Features

RPG122K

• Mic 1 Input XLR + 1/4”

• Mic 2 Input XLR + 1/4”

• Mic 1 Level

• Mic 2 Level

• RCA Line In

• RCA Line out

• Master Volume

• Master Treble

• Master Bass

• Power LED

• Clip LED

• MP3/Line Input Selector Switch

• USB/SD Input

• FM radio Built-In

• Record Function to USB

• Bluetooth Connectivity

• Wireless remote Control

• LCD Display Screen For MP3 Player Functionality

• Output to Second Passive Unit with included Cable

• Includes one wired microphone

• Includes 1 Pair of speaker stands

• 115/230 Volt Switchable

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

•To reduce risk of electric shock, never open the unit. There are no user serviceable

parts, refer service to an authorized Rockville service center.

• Do not expose this unit to any kind of moisture.

• Please ensure that the unit is situated in a properly ventilated area.

• Make sure the unit is placed on a level and stable surface.

Your Power Gig is set up to produce the full spectrum of sound from its woofer and

tweeter horn combination. The lower frequencies seek out the oor of the room that they

are playing in and travel along the oor and walls. The tweeter horn is more directional.

Hence when setting up your system its more important to make sure that the tweeter

horns are not blocked by any furniture and are located / aimed at ear level to the listening

audience. Woofer aiming is not as critical as explained previously due to the nature of the

woofer sounds able to travel through various paths even when blocked.

It is therefore recommended that when setting up your system you set up your speakers

on provided stands so that the tweeter sounds will radiate above the listening crowd. This

will guarantee optimum sound dispersion and achieve clear vocal sound reproduction.

The placement of your microphone is critical in avoiding feedback through your Power

Gig system. Never set up your microphone in front of the speaker. Always set up your mi-

crophone behind the speaker. When approaching the speaker to make any adjustments,

we recommend approaching the speaker from the rear and not walking directly towards

the front of the speaker.

Your Power Gig speaker comes standard with two brackets which snap in to the cabinet

sides allowing it to be placed on the oor at an angle as a stage monitor. Unlike a PA set-

up which face the crowd, stage monitors are set up to face the performer on stage and to

direct the sound towards them. This presents a particular problem as now feedback may

occur. To avoid stage monitor feedback the following precautions should be taken.

Setting Up Your Power Gig Professional Sound System

How To Avoid Irritating Feedback

Stage Monitor Setup

1. Choose a microphone with high directivity, i.e. cardioid or hyper-cardioid polar

pattern.

2. Never point the microphone directly down in front of the speaker. Holding the micro-

phone in normal position will allow you to be closer to the stage monitor with out

feedback.

3. See illustration below as to position of microphones when mounted in stand.

Cardioid polar patter microphones should always be at a 90 degree angle to the axis of

the stage monitor. Hyper Cardioid polar pattern microphones should be positioned at

an acute angle to the sage monitor.

You may choose to add a feedback eliminating processor to your system for additional

exibility on stage.

There is really only one volume control on the Power Gig unit, that is the knob marked

VOLUME.

The Mic 1/Mic 2 in Level controls is a matching device to match the preamp voltages of

items such as microphones and guitars or other musical instruments with your Power Gig

unit. Never turn these up to maximum unless indicated by the instructions below. With a

properly matched signal your system will produce less distortion, be subject to less feed-

back, and will produce louder, cleaner and clearer sound. Use the Volume control once all

inputs are matched properly. Your Power Gig features a CLIP LED indicator to help you

set and match your components. Please be sure to read all set up instructions so your

Power Gig sounds its best.

Your Power Gig features two ultra-low noise Mic/Line inputs via XLR & 1/4˝ TRS

stereo jacks.

1. Make sure the Power Gig is in OFF position.

2. Plug in your microphone.

A Word About System Volume Controls and Gains.

Cardioid Polar Patter Hyper Cardioid Polar Patter

APPLICATION USES

Microphone Presentations

3. Keep Volume at 0 position.

4. Turn Mic Level to 0 position.

5. Switch on the Power Gig unit.

6. Slowly turn Mic Level clockwise until you achieve appropriate volume setting. This

is determined by the CLIP LED indicator light. Proper function is achieved when the

CLIP indicator lights up at peak levels, it should never be in constant on position.

7. The above adjustment matched the microphone preamp to the input volume of the

Power Gig unit.

8. Now turn up the Volume to necessary loudness by rotating clockwise.

Always stand behind the Power Gig when making your microphone adjustments to avoid

feedback distortion.

You can choose to hook up two microphones to your Power Gig in the following manner.

Set up microphone #1 as instructed above. Using same set up instructions, insert mi-

crophone #2 into second ultra-low noise Mic/Line input which features its own separate

Level control. Use this Level control to increase the microphone level and balance the

inputs between the two microphones before attempting to adjust the Volume.

Multi-Microphone Hook Up

PWR

56 6

CLIP

OFF

POWER

MIC2 LEVEL VOLUME

VOLUME

MIC 1

10 10

0 0

1 1

2 2

3 3

4 4

6 6

5 5

7 7

8 8

MIC1 LEVEL

MIC 2

You can use the Line Input function when you wish to hook up an additional stereo signal

source without the use of a mixer console. CD players, DVD music players, MP3 players

etc can be plugged directly in to the RCA jacks labeled LINE INPUT.

To connect a CD, DVD music player or MP3 player.

1. Turning your Power Gig unit to OFF position.

2. Turn Master Volume to 0 position.

3. Turn Level control to 0 position.

4. Connect the music source unit to the RCA jacks marked Line In.

5. Use the push button (located above to RCA jacks) to select between Line input

or MP3 input.

6. Switch ON your Power Gig unit.

7. Slowly turn the Level Volume control clockwise until the CLIP LED indicator begins

to blink, then turn it down slightly. This indicates the maximum input voltage gain is

matched and set properly.

8. Turn Master Volume up to achieve proper volume.

Line Input Feature

OFF

1POWER 2 3

6 75

POWER 7

VOLUME

100

4 6

VOLUME

100

4 6

LEVEL

100

4 6

LEVEL

100

4 6

LINE IN

LINE OUT

L R

MP3

LINE

PWR

CLIP

While guitarists and bassists have their own ampliers to ensure that the volume pro-

duced by their instrument matches that of the other sound sources on stage, keyboards

and synthesizers are a dierent story. They usually have no built-in speakers which

means they need an external sound source. The Power Gig unit allows for the connec-

tion and mixing of two keyboards. More than two keyboards can be connected using a

sub mixer to mix down the signals and send them to the Power Gig unit via the sub mixer

output connectors.

Be sure to have your Power Gig units installed by a qualied installation professional.

Ensure that the unit is properly grounded during and after installation. Not doing so may

result in electrostatic discharge which may cause damage your equipment.

Keyboard Amplication

Installation

The 1/4˝ TRS output marked Speaker Output is for connecting the active unit to the

passive unit. Passive speaker impedance must always be 8 ohm.

Speaker Output Connection.

SPEAKER OUTPUT

To connect your iPod, iPhone, MP3 player, Android phone or any other Bluetooth capable

device follow the steps listed below.

1. Make sure the Power Gig unit’s power switch is in the ON position.

2. Turn on the Bluetooth feature on your device and ensure that it is in “discoverable”

mode.

3. Push the Mode button on your Power Gig unit until you are in Bluetooth mode.

4. Once in Bluetooth mode, the unit should show up on your device as “MEGA STAR”.

Select it from your list of available devices and you are ready to go.

Bluetooth Pairing

3 4

BLUETOOTH ON

DEVICE

DISCOVERABLE

POWER

USB

MODE EQ

SCAN VOL–VOL+

Andere Handbücher für Power Gig RPG122K

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockville Sprecher Handbücher

Rockville

Rockville BPA12 Bedienungsanleitung

Rockville

Rockville TITAN 15 Bedienungsanleitung

Rockville

Rockville RPG15BT Bedienungsanleitung

Rockville

Rockville RBG15FA Bedienungsanleitung

Rockville

Rockville RPG2X10 Bedienungsanleitung

Rockville

Rockville RAM12BT Bedienungsanleitung

Rockville

Rockville DWB65 Bedienungsanleitung

Rockville

Rockville PBL20 Bedienungsanleitung

Rockville

Rockville PBL30 Bedienungsanleitung

Rockville

Rockville CUBE Bedienungsanleitung

Rockville

Rockville ROCK PARTY 8 Bedienungsanleitung

Rockville

Rockville BPA Series Bedienungsanleitung

Rockville

Rockville BPA10 Bedienungsanleitung

Rockville

Rockville ROCK PARTY 6 Bedienungsanleitung

Rockville

Rockville RPG152K Bedienungsanleitung

Rockville

Rockville APM5 Bedienungsanleitung

Rockville

Rockville ROCKWAVE Bedienungsanleitung

Rockville

Rockville RPB20 Bedienungsanleitung

Rockville

Rockville BPA15 Bedienungsanleitung

Rockville

Rockville ASM5 Active Series Bedienungsanleitung

Rockville

Rockville RPG12BT V2 Bedienungsanleitung

Rockville

Rockville RAM12BT V2 Bedienungsanleitung

Rockville

Rockville RPB24 Bedienungsanleitung

Rockville

Rockville GB1 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung