Rockwell Automation Allen-Bradley PowerFlex 4-Class HIM Bedienungsanleitung

Quick Reference

Original Instructions

PowerFlex 4-Class HIM (DSI)

Catalog Numbers 22-HIM-A3, 22-HIM-C2S

Introduction

This Quick Reference provides display descriptions, key descriptions, information about the menu navigation tabs, and a parameter list for the

PowerFlex® 4-Class HIM (DSI) Human Interface Modules (HIM).

Topic Page

Introduction 1

Summary of Changes 2

Display Descriptions 2

Key Descriptions 3

Menu Navigation Tabs 3

Parameter List 4

Additional Resources 7

SelEsc

Esc

7 8 9

4 5 6

1 2 3

.0 +/-

Sel

Jog

Alt

Param #

View Lang Remove

DSI

Esc Sel

ALT

LANG

DISP

Jog

DSI

REMOVE

Esc Sel

ALT

LANG DISP

Jog

DSI

22-HIM-A3 — IP20 (NEMA Type 1) 22-HIM-C2S — IP66 (NEMA Type 4X/12)

2Rockwell Automation Publication 22HIM-QR001G-EN-P - August 2021

PowerFlex 4-Class HIM (DSI) Quick Reference

Summary of Changes

This publication contains the following new or updated information. This list includes substantive updates only and is not intended to reflect all

changes.

Display Descriptions

Topic Page

Removed parameter 24; modified parameter 23. 5

Display

1 Status Line: Direction |Operating Status |Drive Status |Auto/Manual Mode |Parameters Locked/Unlocked

Process Display screen:

Output Frequency

User Display Line 1 (HIM Parameter 04)

User Display Line 2 (HIM Parameter 05)

3 Programming screen

4MenuNavigationTabs

5 Large Format User Display screen:

SEL

DIAG DSEL MEM

Changed Params

Linear List

Parameters

Groups

PARAM

F Stopped Auto

F At Reference Auto

Output Freq

Esc

7 8 9

4 5 6

1 2 3

.0+/-

Sel

Jog

Alt

Param #

View Lang Remove

DSI

F Stopped Auto

Rockwell Automation Publication 22HIM-QR001G-EN-P - August 2021 3

PowerFlex 4-Class HIM (DSI) Quick Reference

Key Descriptions

Menu Navigation Tabs

Keys Description

Exit a menu, cancel a change to a parameter value, or acknowledge a fault/alarm.

Select a digit, select a bit, or select a menu tab.

Scroll through options, increase a value, or toggle a bit.

Scroll through options, decrease a value, or toggle a bit.

Enter a menu, enter edit mode in a parameter screen, or save a change to a parameter value.

plus…

Toggle between the Process Display and Large Format Display.

Select an available language for text displayed on HIM screens.

Allow the HIM to be disconnected without causing a fault condition.

Enable direct parameter number entry.

Start the drive.

Stop the drive or clear a fault.

Change direction.

Jog the drive.

Type parameter numbers and values.

Increase or decrease the speed Reference to the drive after these keys are enabled by setting drive parameter 38 [Speed Reference] as follows:

When the HIM is the DSI Master, set parameter 38 to ‘5’ (Comm Port).

When the HIM is the DSI Slave, set parameter 38 to ‘1’ (Internal Freq).

To view the HIM’s active device type status (Master or Slave), see HIM Parameter 10 [M/S Status].

Tabs Description

DIAG The Diagnostics tab is used to display faults, the device (drive or peripheral) status, and device version.

PARAM The Parameters tab is used to edit parameters. Parameters can be displayed in groups, in a linear list, or only those changed from their defaults.

DSEL The Device Select tab is used to select the device (drive or peripheral) that the HIM is to access.

MEM The Memory Storage tab is used for HIM Copycat (uploading/downloading configurations to the HIM EEPROM).

HIM The HIM Setup tab is used to access HIM parameters, view the HIM version, and to edit the Reference text when a user-defined Reference is used.

Esc

Sel

Alt

Sel

View

Lan

Remove

+/-

Param #

Jog

...

+/-

4Rockwell Automation Publication 22HIM-QR001G-EN-P - August 2021

PowerFlex 4-Class HIM (DSI) Quick Reference

Parameter List

Parameter

No. Name and Description Details

01 [Startup Display]

Selects the display screen shown when the HIM is powered up.

Default: 0 = Main Menu

Values: 0 = Main Menu

1 = Process Disp

2 = Large Disp

3 = Startup Param

Type: Read/Write

02 [Startup Param]

Selects a desired drive parameter to be displayed if Parameter 01 [Startup Display] is set to ‘3’ (Startup Param).

Default: 1

Minimum: 1

Maximum: 65535

Type: Read/Write

03 Reserved

04 [User Disp Line 1]

Selects a desired drive parameter to be displayed on User Display Line 1 of the Process Display screen.

For example, setting to ‘3’ selects PowerFlex 4-Class drive Parameter 3 [Output Current] to be displayed.

Default: 3

Minimum: 1

Maximum: 65535

Type: Read/Write

05 [User Disp Line 2]

Selects a desired drive parameter to be displayed on User Display Line 2 of the Process Display screen.

For example, setting to ‘5’ selects PowerFlex 4-Class drive Parameter 5 [DC Bus Voltage] to be displayed.

Default: 5

Minimum: 1

Maximum: 65535

Type: Read/Write

06 [Large Disp Param]

Selects a desired drive parameter to be displayed on the Large Format User Display screen.

For example, setting to ‘1’ selects PowerFlex 4-Class drive Parameter 1 [Output Freq] to be displayed. Setting to ‘0’ enables

the Scaled Reference to be displayed.

Default: 1

Minimum: 0

Maximum: 65535

Type: Read/Write

07 [LCD Contrast]

Sets the HIM LCD contrast level.

Default: 50%

Minimum: 0%

Maximum: 100%

Type: Read/Write

08 [Reset HIM]

1 (Reset):Resets the HIM.

2 (Set Defaults):Resets HIM parameters to factory settings.

This parameter returns to a value of ‘0’ (Ready) after the reset function is complete.

Default: 0 = Ready

Values: 0 = Ready

1 = Reset

2 = Set Defaults

Type: Read/Write

09 [Device Type]

Selects the HIM device type. When set to ‘0’ (Auto), the HIM is automatically configured as either a DSI Master or Slave

depending on the presence of other peripheral devices.

Default: 0 = Auto

Values: 0 = Auto

1 = Slave

2 = Master

Type: Read/Write

10 [M/S Status]

Displays the HIM active device type.

Default: –

Values: 1 = Slave

2 = Master

Type: Read-only

11 [HIM Ref Preset]

0 (Zero Start):HIM Reference is always ‘0.0’ at power on.

1 (Host Output):HIM will assume the Host’s output feedback (bumpless transfer) and preset its Reference when the

Reference is configured to be received on the RS-485 port. This can be verified by viewing Diagnostics/Device Status/

Remote Freq Ref = 1.

2 (Last HIM Ref):HIM will store the HIM Reference in EEPROM each time it is changed. HIM Reference is restored at power on.

Default: 0 = Zero Start

Values: 0 = Zero Start

1 = Host Output

2 = Last HIM Ref

Type: Read/Write

12 [Ref Scaling]

Enables or disables scaling the Reference to a user-defined value. When Parameter 12 [Ref Scaling] is set to ‘1’

(Enabled), use HIM Parameters 13…22 to scale the Reference.

Default: 0 = Disabled

Values: 0 = Disabled

1 = Enabled

Type: Read/Write

13 [Ref Max Value]

Sets the user-defined value to be displayed when the drive is running at 60 Hz.

Default: 600

Minimum: 100

Maximum: 65535

Type: Read/Write

Rockwell Automation Publication 22HIM-QR001G-EN-P - August 2021 5

PowerFlex 4-Class HIM (DSI) Quick Reference

14 [Ref Dec Position]

Sets the number of digits to be displayed to the right of the decimal point for the Reference.

Default: 1

Minimum: 0

Maximum: 3

Type: Read/Write

[Ref Units Char 1]

[Ref Units Char 2]

[Ref Units Char 3]

[Ref Units Char 4]

[Ref Units Char 5]

[Ref Units Char 6]

[Ref Units Char 7]

[Ref Units Char 8]

Selects up to 8 characters (from the ISO 8859-1 character set) to use for the Reference units on the Process Display.

Parameters 15…22 can also be configured using the ‘Edit Ref Text’ selection in the HIM Setup tab.

Default: 72(‘H’)

Default: 122(‘z’)

Default: 32(blank - no character)

Minimum: 32

Maximum: 255

Type: Read/Write

23 [AUTO MAN Switch]

Switch the display of AUTO and MAN.

Default: 0 = Switch

Values: 0 = Switch

1 = Not Switch

Type: Read/Write

New settings to HIM parameters are implemented immediately. Resetting the HIM is not required for new values to take effect.

Parameter

No. Name and Description Details

6Rockwell Automation Publication 22HIM-QR001G-EN-P - August 2021

PowerFlex 4-Class HIM (DSI) Quick Reference

Notes:

Rockwell Automation Publication 22HIM-QR001G-EN-P - August 2021 7

PowerFlex 4-Class HIM (DSI) Quick Reference

Additional Resources

These documents contain additional information concerning related products from Rockwell Automation.

You can view or download publications at rok.auto/literature.

Resource Description

PowerFlex 4M User Manual, publication 22F-UM001 Provides basic information needed to install, start-up, and troubleshoot the PowerFlex 4M

Adjustable Frequency AC Drive.

PowerFlex 4M Adjustable Frequency AC Drives Technical Data, publication 22F-TD001 Provides detailed technical data, specifications, and ratings for the PowerFlex 4M

Adjustable Frequency AC Drive

System Security Design Guidelines Reference Manual, SECURE-RM001

Provides guidance on how to conduct security assessments, implement Rockwell

Automation products in a secure system, harden the control system, manage user access,

and dispose of equipment.

Industrial Components Preventive Maintenance, Enclosures, and Contact Ratings

Specifications, publication IC-TD002

Provides a quick reference tool for Allen-Bradley industrial automation controls and

assemblies.

Safety Guidelines for the Application, Installation, and Maintenance of Solid-state

Control, publication SGI-1.1

Designed to harmonize with NEMA Standards Publication No. ICS 1.1-1987 and provides

general guidelines for the application, installation, and maintenance of solid-state control

in the form of individual devices or packaged assemblies incorporating solid-state

components.

Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system.

Product Certifications website, rok.auto/certifications. Provides declarations of conformity, certificates, and other certification details.

Publication 22HIM-QR001G-EN-P - August 2021

Rockwell Automation Support

Use these resources to access support information.

Documentation Feedback

Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the

form at rok.auto/docfeedback.

Technical Support Center Find help with how-to videos, FAQs, chat, user forums, and product notification updates. rok.auto/support

Knowledgebase Access Knowledgebase articles. rok.auto/knowledgebase

Local Technical Support Phone Numbers Locate the telephone number for your country. rok.auto/phonesupport

Literature Library Find installation instructions, manuals, brochures, and technical data publications. rok.auto/literature

Product Compatibility and Download Center

(PCDC) Download firmware, associated files (such as AOP, EDS, and DTM), and access product release

notes. rok.auto/pcdc

Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.

Allen-Bradley, expanding human possibility, PowerFlex, and Rockwell Automation are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752, İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Aufnahmegeräte Handbücher

Rockwell Automation

Rockwell Automation Trusted T8871 Bedienungsanleitung

Rockwell Automation

Rockwell Automation AB Quality Allen-Bradley MicroLogix... Bedienungsanleitung

Rockwell Automation

Rockwell Automation AllenBradley 432ES-IG3 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Guardmaster 440R-ENETR Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1784-KTX Bedienungsanleitung

Rockwell Automation

Rockwell Automation Guardmaster 440R-ENETR Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch