ROHS ARES-5300 Bedienungsanleitung

ARES-5300

Programmable Embedded Controller with

Intel®Celeron®J1900

User’s Manual

Version 1.0

2014.03

P/N: 4012530000100P

- 2 -

This page is intentionally left blank.

- i -

Revision History

Version Date Description

1.0 March 2014 Initial release

- ii -

Contents

Revision History ............................................................................. i

Preface............................................................................................ v

Declaration of Conformity ......................................................................... v

CE...................................................................................................... v

FCC Class A....................................................................................... v

RoHS .................................................................................................vi

SVHC / REACH .................................................................................vi

Important Safety Instructions...................................................................vii

Warning ..................................................................................................viii

Replacing Lithium Battery.......................................................................viii

Technical Support ...................................................................................viii

Warranty ...................................................................................................ix

Chapter 1 - Introduction................................................................ 1

1.1. Product Highlights ............................................................................. 2

1.2. About this Manual .............................................................................. 2

1.3. Specications .................................................................................... 2

1.4. Inside the Package ............................................................................ 4

1.5. Ordering Information.......................................................................... 4

1.5.1. Optional Accessories ............................................................... 4

1.5.2. Congure-to-Order Service...................................................... 5

Chapter 2 - Getting Started........................................................... 7

2.1. Dimensions........................................................................................ 8

2.2. Take A Tour ........................................................................................ 9

2.3. Driver Installation Notes .................................................................. 11

Chapter 3 - System Conguration ............................................. 13

3.1. Board Layout ................................................................................... 14

3.1.1. Main Board............................................................................. 14

3.1.2. Power Board .......................................................................... 16

3.2. Jumper & Connectors ..................................................................... 17

3.2.1. Main Board Connectors ......................................................... 17

3.2.3. Power Board Connectors....................................................... 21

Chapter 4 - Installation and Maintenance.................................. 25

4.1. Install Hardware............................................................................... 26

4.1.1. Open the Computer ............................................................... 26

4.1.2. Restore the upper cover ........................................................ 28

4.1.3. Install Memory Module.......................................................... 29

4.2. DIN-rail Mount.................................................................................. 31

4.2.1. Mount the Computer .............................................................. 31

4.2.2. Dismount the Computer......................................................... 33

- iii -

Contents

4.3. Ground the Computer...................................................................... 34

4.4. Wire DC-in Power Source................................................................ 35

Chapter 5 - BIOS.......................................................................... 37

5.1. Main................................................................................................. 40

5.2. Advanced......................................................................................... 41

5.2.1. Boot Conguration ................................................................. 42

5.2.2. PCI Express Conguration..................................................... 42

5.2.3. USB Conguration ................................................................. 43

5.2.4. Video Conguration ............................................................... 44

5.2.5. Thermal Conguration ........................................................... 45

5.3. Security............................................................................................ 47

5.4. Power............................................................................................... 48

5.4.1 Advanced CPU Control........................................................... 49

5.5. Boot ................................................................................................. 51

5.6. Exit................................................................................................... 53

Appendices .................................................................................. 55

Appendix A: Install mSATA Storage........................................................ 56

Appendix B: Wi-Fi Module WIFI-IN1300 Hardware/Software Installation58

B.1. Install WIFI-IN1300................................................................... 58

B.2. Install Device Driver & Application Program............................. 63

- iv -

This page is intentionally left blank.

- v -

Preface

The information in this document is subject to change without prior notice in

order to improve the reliability, design and function. It does not represent a

commitment on the part of the manufacturer.

Under no circumstances will the manufacturer be liable for any direct, indirect,

special, incidental, or consequential damages arising from the use or inability

to use the product or documentation, even if advised of the possibility of such

damages.

This document contains proprietary information protected by copyright. All rights

are reserved. No part of this document may be reproduced by any mechanical,

electronic, or other means in any form without prior written permission of the

manufacturer.

Declaration of Conformity

The CE symbol on the computer indicates that it is in compliance with the

directives of the Union European (EU). A Certicate of Compliance is available

by contacting Technical Support.

This product has passed the CE test for environmental specications when

shielded cables are used for external wiring. We recommend the use of

shielded cables. This kind of cable is available from ARBOR. Please contact

your local supplier for ordering information.

Warning

This is a class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

FCC Class A

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference

that may cause undesired operation.

Preface

- vi -

Preface

NOTE:

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

RoHS

ARBOR Technology Corp. certies that all components in its products

are in compliance and conform to the European Union’s Restriction of Use

of Hazardous Substances in Electrical and Electronic Equipment (RoHS)

Directive 2002/95/EC.

The above mentioned directive was published on 2/13/2003. The main purpose

of the directive is to prohibit the use of lead, mercury, cadmium, hexavalent

chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl

ethers (PBDE) in electrical and electronic products. Member states of the EU

are to enforce by 7/1/2006.

ARBOR Technology Corp. hereby states that the listed products do not contain

unintentional additions of lead, mercury, hex chrome, PBB or PBDB that exceed

a maximum concentration value of 0.1% by weight or for cadmium exceed

0.01% by weight, per homogenous material. Homogenous material is dened

as a substance or mixture of substances with uniform composition (such as

solders, resins, plating, etc.). Lead-free solder is used for all terminations

(Sn(96-96.5%), Ag(3.0-3.5%) and Cu(0.5%)).

SVHC / REACH

To minimize the environmental impact and take more responsibility to the earth

we live, Arbor hereby conrms all products comply with the restriction of SVHC

(Substances of Very High Concern) in (EC) 1907/2006 (REACH --Registration,

Evaluation, Authorization, and Restriction of Chemicals) regulated by the

European Union.

All substances listed in SVHC < 0.1 % by weight (1000 ppm)

- vii -

Preface

Important Safety Instructions

Read these safety instructions carefully

1. Read all cautions and warnings on the equipment.

2. Place this equipment on a reliable surface when installing. Dropping it or

letting it fall may cause damage

3. Make sure the correct voltage is connected to the equipment.

4. For pluggable equipment, the socket outlet should be near the equipment

and should be easily accessible.

5. Keep this equipment away from humidity.

6. The openings on the enclosure are for air convection and protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

7. Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

8. Never pour any liquid into opening. This may cause re or electrical shock.

9. Never open the equipment. For safety reasons, the equipment should be

opened only by qualied service personnel.

10. If one of the following situations arises, get the equipment checked by

service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work

according to the user’s manual.

e. The equipment has been dropped or damaged.

f. The equipment has obvious signs of breakage.

11. Keep this User’s Manual for later reference.

Product Heat

The computer generates heat during operation. Contact the

computer's chassis with your body could cause discomfort or

even a skin burn.

- viii -

Preface

Warning

The Box PC and its components contain very delicately Integrated Circuits (IC).

To protect the Box PC and its components against damage caused by static

electricity, you should always follow the precautions below when handling it:

1. Disconnect your Box PC from the power source when you want to work

on the inside.

2. Use a grounded wrist strap when handling computer components.

3. Place components on a grounded antistatic pad or on the bag that came

with the Box PC, whenever components are separated from the system.

Replacing Lithium Battery

Incorrect replacement of the lithium battery may lead to a risk of explosion.

The lithium battery must be replaced with an identical battery or a battery type

recommended by the manufacturer.

Do not throw lithium batteries into the trash can. It must be disposed of in

accordance with local regulations concerning special waste.

Technical Support

If you have any technical difculties, please consult the user’s manual rst at:

ftp://ftp.arbor.com.tw/pub/manual

Please do not hesitate to call or e-mail our customer service when you still

cannot nd out the answer.

http://www.arbor.com.tw

E-mail:info@arbor.com.tw

Inhaltsverzeichnis

Andere ROHS Controller Handbücher

ROHS

ROHS VCC Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung