SAFETY RULES AND PRECAUTIONS
Proper safety precautions must be observed. Like all power equipment, this unit must be handled carefully. DO NOT
EXPOSE YOURSELF OR OTHERS TO DANGER. Follow these general rules. Do not permit others to use this
machine unless they are thoroughly responsible and have read and understood the machine manual and are trained
in its operation.
This appliance is not intended for use by persons (including children with reduced physical, sensory or mental
capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should not play unsupervised with the
appliance.
Always wear safety goggles for eye protection. Dress properly, do not wear loose clothing or jewellery that
could become caught in moving parts of the unit; safe, sturdy, non-skid footwear should always be worn.
Long hair should be tied back. It is recommended that legs and feet be covered to protect from flying debris
during operation.
Inspect the entire machine for loose parts (nuts, bolts, screws, etc) and any damage. Repair or replace as
necessary before using the machine. DO NOT USE any attachment with this power head other than the ones
recommended by our company. Serious injury to the operator or bystanders could result, as well as damage
to the machine.
Keep the handles free from oil and fuel.
Always grip the handle and the shoulder strap when cutting.
Do not smoke while mixing fuel or filling tank.
Do not mix fuel in an enclosed room or near open flames. Assure adequate ventilation.
Always mix and store the fuel in a properly marked container that is approved by local codes and ordinances
for such usage.
Never remove the fuel tank cap while the engine is running.
Never start or run the engine inside a closed room or building. Fumes from the exhaust contain dangerous
carbon monoxide.
Never attempt to make engine adjustments while the unit is running or strapped to the operator. Always make
engine adjustments with the unit resting on a flat, clear surface.
Do not use the unit if it is damaged or poorly adjusted. Never remove the machines guard. Serious injury to
the operator or bystanders could result as well as damage to the machine.
Inspect the area to by cut and remove all debris that could become entangled in the nylon cutting head. Also
remove any objects that the unit may throw during cutting.
Keep children away. Onlookers should be kept at a safe distance from the work area, at least 15 metres (50
feet).
Never leave the machine unattended.
Do not use this unit for any job other than those for which it was intended as described in this manual.
Do not overreach. Keep proper footing and balance at all times. Do not run the unit while standing on a
ladder or on any other unstable footing location.
Keep hands and feet clear of the nylon cutting head while unit is in use.
Do not use this type of machine for sweeping away debris.
Do not use the unit when you are tired, ill or under the influence of medication, drugs or alcohol.
Use nylon cutting head which is not damaged. If a stone or any object is hit, stop the engine and check the
nylon cutting head. A broken or unbalanced nylon cutting head must never be used.
FOLLOW INSTRUCTIONS FOR CHANGING ACCESSORIES.
Do not store in a closed area where fuel vapours can reach an open flame from hot water heaters, furnaces,
etc. Store in a locked, well ventilated area only.
Ensure safe and proper performance of your product. These parts are available from your dealer. The use of
other accessories or attachments may cause a potential hazard or injury to the user, damage to the machine
and void this warranty.
Clean the machine completely, especially the fuel tank and its surroundings, and the air cleaner.
When refuelling, be sure to stop the engine and confirm that it‟s cooled down. Never refuel when the engine
is running or hot. When petrol spills, be sure to wipe it up, and completely dispose of those materials before
starting the engine.
