Rokit EDISON AEP Bedienungsanleitung
USER MANUAL
This user manual is described in detail to help your first experience with 3DISON AEP.
The manual will show you how to simply and easily use the printer.
Please carefully read and follow the manual to fully utilize 3DISON AEP.
2
3DISON AEP User Manual
Safety Information
Specifications
Product Function
What’ s in the Box
Printer Overview
How to use 3DISON AEP
1) Unpacking your 3DISON AEP
2) Filament Loading and Unloading
3) Leveling the Printing Bed
4) Display Menu Introduction
5) Start 3D Printing
Maintenance
Notice
FAQ
Product Warranty
Certification Mark
3
4
5
6
7
8
9
11
12
14
15
16
17
20
21
Contents
3
3DISON AEP User Manual
KC, CE, FCC Certification - 3DISON AEP is certificated by KC, which indicates that 3DISON AEP
meets the requirements of customer protection on safety, health, and environment in KOREA
WARNING
1. The 3DISON AEP generates high temperatures and includes moving parts
that can cause injury. Thus, don’ t put your hands in the machine while
printing. After the printing is completed, wait until the temperature inside the
printer goes down.
2. Never reach inside the printer while it’ s operating.
Safe Information
4
3DISON AEP User Manual
Specifications
Printing
Print Technology
Maximum Build Size
Printing Speed
Hot-End(Nozzle) Size
Layer Resolution
Positioning Precision
Printing Material
Fused Filament Fabrication (FFF)
12.7ℓ(260mmX200mmX245mm)
25mm/sec ~ 1000mm/sec (with Acceleration Mode)
0.4mm, 0.6mm
25 ~ 600micron (Recommanded 100~300micron)
X, Y : 11micron, Z : 2.5micron
PLA(12color), ABS(10color), Nylon (3color),
HIPS, PVA, Wood, S-PLA (6color),
Ploy Carbonate, ULTEMTM resin grade 9085
* ULTEMTM is a registered trademark of
SABIC or its affiliates or subsidiaries.
Hardware
Extruder
Shaft Thickness
Belt/ Pulley
Internal LED Lighting
Heat-Bed Temperature Controller
Heat-Bed Heating System
Auto-Leveling
Installation Front Door
Pause/Unpause
Material Change While Operation
Frame Dimension
Product Weight
Storage Temperature
Extruder Temperature
Heat-Plate Temperature
Dual Extruder System
X : 8mm, Y, Z : 12mm
2GT Belt / Pulley
O
O
O
O
O
O
O
511mm X 412mm X 714mm
30kg
10℃(Prevailing Temperature) ~ 40℃
60℃ ~ 400℃
50℃ ~ 280℃
Electronic
Input 220V, 60Hz, 4.5A
Software
Control Program
Operating System
Compatible File Format
Creator K
Windows, Mac OS X
STL, OBJ
5
3DISON AEP User Manual
Product Function
1. Auto-Leveling: Before printing, Auto-Leveling sensor reads gap between Heat-Bed and Hot-End and level Heat-
Bed without manual adjustment.
2. Heat-Bed Auto Turn off: Automatically turn off the Heat-Bed after printing.
3. Auto-Cleaning: Cleaning inside of Hot-End for stable printing process.
4. Roof Case: Prevent filament from getting twisted. (Patent application is requested)
5. Heat-Bed Temperature Controller: Control the Heat-Bed temperature.
Product Function
About 3DISON AEP
3DISON AEP is desktop 3D printer based on Fused Filament Fabrication(FFF) method that the object is printed by
three dimension. AEP is characterized by applicable filament and It can be applied not only PLA, ABS but also
engineering plastic like ULTEMTM resin grade 9085 and PC. AEP is the world’s first production grade that has the high
resolution of 25 micron and the high speed of 1000mm/sec. (PLA)
※FFF Method : This method works by laying down consecutive layers of material at high temperatures allowing the adjacent
layers to cool and bond together before the next layer is deposited.
※ULTEM
TM
is a registered trademark of SABIC or its affiliates or subsidiaries.
6
3DISON AEP User Manual
What’s in the Box
Printer Body FilamentSD Card 4GB SUS Hot End
Quick Guide
Quick Guide Anodized Print Bed Extruder
Hex Wrench Micro USB CableTweezersScraper
Power Cable Wire Brush Tool Bag GlovesSpanner
1.8mm Pin
3D printer machine body.
For replacing
Hot-End parts.
For connecting
power.
For assembling &
disassembling extruder,
Heat-Bed.
Memory card for
saving files.
Cleaning Tool for
Hot-End when the
material sticks to the
nozzle.
For keeping
provided tools.
Please put on gloves
while at work for safety.
Spare parts of high
temperature Hot-End.
The default providing
filament.
For internal cleaning
of extruder tube &
nozzle jamming.
Cleaning tool for
Hot-End & Bottom
of 3D printer.
For connecting
between PC and 3D
printer.
For removing output
from Heat-Bed.
Setting machine &
user guidance are
described in detail in
this manual book.
Spare parts of
Bed-Plate.
Spare parts of
extrude.
3DISON AEP Printer
Welcome Box
Filament Box
Accessories
3DISON AEP
Printer Body
Hex Wrench, SD Card 4GB, 0.4 SUS Hot-End, Scraper, 1.8mm Pin, Removal Tool,
Micro USB, Spanner, Power Cable, Wire Brush, Tool Bag, Gloves, Quick Guide
Filament 700g X 2
Anodized Print Bed, Extruder
7
3DISON AEP User Manual
Front View
1 2 3
5
4
6
Heat-Bed Heat Controller LCD Display Arrows and OK Button
Door Printing Bed Extruder Roof Case SD Card Slot
USB 2.0 Ethernet Power Switch Power Socket Air Filter
1
6 7 8
910 11 12
3
45
2
Side View Back View
Top View
9
10
12
7
811
Printer Overview
8
3DISON AEP User Manual
Unpacking your 3DISON AEP
How to use 3DISON AEP
Remove styrofoam at coners. Put
the machine on a flat surface.
Unpack the box and remove
styrofoam. (including Quick Guide
, Welcome Box)
Open the door and remove
protection styrofoam from Heat
-Bed and Crash-Cushion.
Remove Crash-Cushion from the
shafts. (X,Y,Z axis)
123
※ Caution about unpacking
- Be careful when removing the machine from the box. (Drop, Impact)
- Be careful when you treat any sharp object such as scissors, knife and cable cut.
- Be careful not to cut cables when unpacking.
- Please keep the box and styrofoam for delivering & A/S later.
※ Caution about delivery
- Caution: Inflammables / Use of fire / Impact / Moisture strictly prohibited.
9
3DISON AEP User Manual
Check if the filament is built up
normally in circle shape.
(This process goes on for
about 30 seconds)
Press OK button to stop loading.
Push the filament into the blue
cap on the extruder by pressing
the spring block until you feel
the motor pulling in it. Wait until
you see the filament coming out
from the extruder nozzle.
567
Loading Filament
Select Load Right or Load Left
depending on which side you
want to load the filament. Then
the extruder will start preheating.
(Left Hot-End : PLA, ABS, PC)
(Right Hot-End : ULTEMTM resin
grade 9085)
Go to the LCD panel and select
Utilities > Filament Loading.
When the extruder is completely
heated with alarm, put the
filament spool into the roof case
and insert filament into the hole
located in the middle of the roof
case.
Open the front door and check
if inserted filament is in, then
move extruder to the middle.
1 2 3 4
How to use 3DISON AEP
※
Please use separated
nozzle when using ULTEMTM
resin grade 9085.
(Right Hot-End)
※ ULTEMTM is a registered
trademark of SABIC or its
affiliates or subsidiaries.
10
3DISON AEP User Manual
Unloading Filament
To remove the filament from
the ex
truder, select Utilities >
Filament Loading and select
Unload Right or Unload Left
depending on which side you
want to remove the filament.
Pull the filament out of the
extruder with the spring block
pressed.
When the extruder is completely
heated with alarm, move the
extruder to the middle.
Press the OK button to stop
unloading.
How to use 3DISON AEP
1 2 3 4
Inhaltsverzeichnis
Andere Rokit 3D-Drucker Handbücher
