Roksan Audio RMX-108 Bedienungsanleitung

Roksan

RMX-108

User Manual

Roksan RMX-108 User’s Manual

RMX-108 Features

·Macro sequence function—each macro

can store 60 commands

·Controls up to six devices, including DVDs,

TVs, Satellite Receivers, VCRs and other

infrared remote control devices

·IR code learning from existing remote

controls for quick configuration

·Preset manufacturer’s codes for many

models

·Up to 44 user-programmable keys for each

device

·Automatic Power Saving mode turns off the

remote after 90 seconds of inactivity

Unpacking the RMX-108

Check the package to make sure the following

items are included.

·RMX-108

·Batteries

Battery Indicator

A battery icon is displayed in the upper left-hand

corner above the Mute button.

When the batteries are almost discharged, the

battery low icon appears.

Roksan RMX-108 User’s Manual

About the controls

The number of soft buttons on the touch screen

changes according to the selected device. The

touch screen soft buttons allow you to operate

the RMX-108 and your external devices. Use

these keys to program codes from your existing

remotes, control your devices, and set up

macros. You will hear a beep when you press a

button. The RMX-108 turns itself off after 90

seconds of inactivity

Touch screen precautions

·Tap the LCD touch screen gently. Do not

use excessive force.

·Do not use pens or sharp objects to tap the

screen, as you might damage the surface.

·Keep the RMX-108 dry. Wipe off any spills

immediately. Never immerse it in liquid.

·Do not expose the RMX-108 to extreme

temperatures. Keep it away from heat

sources.

·Avoid dropping the RMX-108.

·Do not drop anything on the touch screen.

·Clean the LCD touch screen with a soft,

damp cloth. Do not use abrasives or

cleaning solutions.

Roksan RMX-108 User’s Manual

About the controls

Selecting devices and pages

You can program the hard buttons as well as

two pages of soft buttons (on the touch screen)

for up to six devices. To change between

devices, press the appropriate device button. To

switch between pages, press the device button

again. The current page is indicated by or

in the top right corner of the touch screen.

Setting up the RMX-108

Entering setup

To enter setup, press and hold the button for

two seconds. From the setup screen, you can

·Setup preset codes

·Learning codes

·Creating Macros

·Delete key codes

·Delete devices codes

·Reset the handset

NOTES:

When the battery low icon appears, you will not

be able to enter setup. Please renew batteries to

entering setup.

Learning codes

Roksan RMX-108 User’s Manual

Learning codes

You can use your existing IR remote control to

“teach” the RMX-108. You can program all

buttons except for the DEVICE keys.

NOTE: Not all codes can be learned. If the RMX-108

cannot learn a code, three beeps are emitted.

1. Set both remotes on a flat surface with the

target device’s remote control pointed at the

SRC-1600’s learning eye, for about 5 ~10 cm

apart.

2. On the SRC-1600, press the device button of

the device you want to

program.

3. Press and hold to enter

setup.

4. Press .

5. On the SRC-1600, press the

button to indicate the key you

want to program. Including Touch screen

buttons and hard buttons. Touch screen

buttons flash when you select them. Press the

device button to switch between touch

screen pages.

6. Aim the IR

transmitter of your

device’s remote

control at the

learning eye of

the RMX-108.

7. Continually press the corresponding button on

your existing remote control until the RMX-108

LED lights.

If the function is not learned correctly, the LED

flashes three times and the RMX-108 emits a

triple beep. Do the relearning procedure

again.

8. When the code has been learned, the

RMX-108 emits a beep and the LED on the

RMX-108 lights until you release the button on

the device’s remote.

9. Repeat steps 5 – 8 for all the buttons you want

to program.

10. When you have finished, press .

Roksan RMX-108 User’s Manual

Deleting codes

NOTES:

·Programming a button overwrites any previous

function.

·When the SRC-1600 has successfully learned a

function it beeps once and the LED lights up

until you release the remote control’s button.

Deleting codes

You can delete codes if you no longer want to

use the function or if you want to re-program a

button. You can delete codes one button at a

time or an entire device at a time.

NOTES:

·Deleting codes does not remove the button

from the layout.

·You do not need to delete a code to

Re-program a button. You can overwrite

codes

by automatically or manually entering preset

codes or by learning from an existing remote

Deleting codes one button at a time

1. Select the appropriate device by pressing the

device button.

2. Press and hold to enter setup.

3. Press .

4. Press the button you want

to delete.

5. Repeat step 4 for all the

buttons you want to

delete.

6. Press .

Deleting codes one device at a time

1. Select the appropriate device by pressing the

device button.

2. Press and hold to enter

setup.

3. Press .

4. Press to confirm. Otherwise,

press to cancel.

5. To delete other devices,

repeat steps 1 ~ 3. Otherwise, press to

leave this mode.

Roksan RMX-108 User’s Manual

Inhaltsverzeichnis

Andere Roksan Audio Fernbedienung Handbücher

Roksan Audio

Roksan Audio RMX-111 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung