Roland V-Mixer M-300 Montage- und Bedienungsanleitung

permission of ROLAND CORPORATION.

1PS

This document describes the features that have been added in this update.

In order to fully understand the M-300’s new features, please read this document together with

the Owner’s Manual for the M-300.

Version 1.5 Owner’s Manual Addendum

Functionality added in version 1.5

The functions below have been added from the version 1.5 system software of the M-300.

✔Wireless LAN function has been newly added (p. 3)

✔31-band GEQ has been newly added. (p. 12)

✔Following new presets have been added to the Effect Library.

No. Name Type

P016 Small Hall REVERB+GATE

P017 Med Hall REVERB+GATE

P018 Large Hall REVERB+GATE

P019 Concert Hall REVERB+GATE

P031 Small Room REVERB+GATE

P032 Med Room REVERB+GATE

P033 Large Room REVERB+GATE

✔New functionality has been added to scene memory.

•Fade function. (p. 18)

•Detailed settings for the Recall Filter function. (p. 19)

✔New functionality has been added for monitoring (p. 21).

•Dimmer function

•Prohibition of operation from the LEVEL knobs in the top panel’s MONITOR section.

✔CHANNEL DISPLAY screen has been added for DCA groups (p. 23).

✔New functionality has been added for User Settings (p. 26).

•Always starts up with GUEST mode.

•Prohibition of specified operations.

✔The following RS-232C commands have been added.

For more information, refer to “V-Mixer RS-232C Reference”.

•Control Commands

Monitor dimmer on/off

USB memory recorder transport

USB memory recorder locate

Song select

•Request Commands

Monitor dimmer request

USB memory recorder status request

USB memory recorder current position request

Song number request

Song name request

Recording remain time request

✔DCA group operation via MIDI control change message has been added.

For more information, refer to “M-300 MIDI Implementation”.

About the Wireless LAN Function

What is Wireless LAN Function?

By inserting the wireless USB Adapter (WNA1100-RL; sold separately) into the M-300’s USB MEMORY port, you will be able to use

wireless-compatible applications (such as the “M-300 Remote” iPad app).

fig.wireless-connect.eps

Items required to use the wireless LAN function

• Wireless USB Adapter (sold separately: WNA1100-RL)

• Wireless LAN access point (e.g., wireless LAN router. Not required if using in ad-hoc mode.)

• iPad with M-300 Remote app loaded.

You cannot connect multiple iPad units simultaneously.

Cautions About Wireless LAN Access Point

• The wireless LAN access point you use should support WPS.

• If your wireless LAN access point does not support WPS, you can connect using the procedure described in “Connecting to a Wireless LAN

Access Point That You Select” (p. 8).

• The ability to connect with any wireless LAN access points is not guaranteed.

• If you are unable to connect to the wireless LAN access point, try connecting using Ad-Hoc mode (p. 9).

Caution About M-300 RCS

While the wireless LAN function is enabled, it is not possible to connect with the M-300 RCS. The wireless LAN function is enabled

if “Enable Wireless LAN” is checked in the system setup screen (p. 5). If you are connecting the M-300 RCS, make sure the wireless

LAN function is disabled.

iPad (M-480 Remote)

Wireless LAN Wireless LAN

Wireless LAN access point

(e.g., wireless LAN router)

M-300

Wireless USB adaptor

(sold separately :WNA1100-RL)

About the Wireless LAN Function

The first time you connect the M-300 to a wireless network, you will need to perform the following procedure (WPS) to join the

wireless network.

* This procedure is required only once. Once you have joined the network, this procedure will no longer be necessary.

What is WPS?

WPS is a standard that makes it easy to make security settings when connecting to a wireless LAN access point. We recommend

that you use WPS when connecting to a wireless LAN access point.

1. Connect WNA1100-RL

Insert the wireless USB Adaptor (WNA1100-RL; sold separately) into the M-300’s USB MEMORY port.

fig.connect-WNA1100RL.eps

2. Call up the SYSTEM screen

Press [SYSTEM] button in SETUP section to call up the SYSTEM screen.

3. Call up the REMOTE popup

Press the [F4 (REMOTE)] to call up the REMOTE popup.

fig.remote-popup.eps

4. Open the WIRELESS LAN tab

Press [F6 (WIRELESS LAN)] to open WIRELESS LAN tab.

fig.wireless-LAN-tab.eps

Basic Connection Method

About the Wireless LAN Function

5. Enable the wireless LAN function

Use cursor buttons and [ENTER] to check the “Enable Wireless LAN”.

* You can only use the wireless LAN function when the “Enable Wireless LAN” is checked.

fig.check-enable-LAN.eps

6. Call up the WIRELESS LAN SETUP popup

Move the cursor to the SETUP button and press [ENTER]. You can call up the WIRELESS LAN SETUP popup.

fig.wireles-LAN-setup.eps

7. Call up the WPS popup

Press [F2 (WPS)] to call up the WPS popup.

fig.WPS-popup.eps

8. Set your wireless LAN access point to operate in WPS mode

For example, press the [WPS] button on your wireless LAN access point.

* For details on WPS operation, refer to the documentation for your wireless LAN access point.

9. Connect the M-300 to the Wireless LAN

Press [F8 (OK)] on the M-300. When it is successfully connected, the “CONNECTED” message appears in the WIRELESS LAN SETUP

popup.

* The connection data is stored in memory when you perform the WPS procedure; the device will automatically connect to the wireless network

the next time.

Be careful of the following points when you perform wireless LAN connection.

• The device (iPad) running the app must be connected to the same network.

• All connection data will be erased if you perform a factory reset or replace the internal lithium battery.

• The project file saved to the USB memory does not contain the connection data.

About the Wireless LAN Function

You can check or alter the wireless settings using the steps below.

1. Call up the REMOTE popup (WIRELESS LAN tab)

Press [SYSTEM] > [F4 (REMOTE)] > [F6 (WIRELESS LAN)]. You can call up the REMOTE popup (WIRELESS LAN tab).

* You can only use the wireless LAN function when the “Enable Wireless LAN” is checked.

fig.call-wireless-LAN-tab.eps

2. Call up the WIRELESS LAN SETUP popup

Move the cursor to the SETUP button and press [ENTER] to call up the WIRELESS LAN SETUP popup.

fig.wireles-LAN-setup.eps

About the Status Display

• CONNECTED

The M-300 is connected to the wireless LAN access point. This part also shows the ID (name) of the access point.

• NOT CONNECTED

Although the wireless USB adaptor is connected, the M-300 is not connected to the wireless LAN access point.

• NOT AVAILABLE

The wireless USB adaptor is not connected.

• AD-HOC MODE

The unit is in Ad-Hoc mode. Refer to “Connecting in Ad-Hoc Mode” (p. 9).

• DISABLE

The wireless LAN function is disabled. The “Enable Wireless LAN” is not checked.

Wireless LAN Function Settings

About the Wireless LAN Function

About the Wireless LAN Status Icons

fig.signal-ststus-icons.eps

fig.signal-icon.eps

The M-300 is connected to the wireless LAN access point. This indicates the signal level with 3 bars.

fig.adaptor-connected.eps

Although the wireless USB adaptor is connected, the M-300 is not connected to the wireless LAN access point.

fig.no-adaptor.eps

The wireless USB adaptor is not connected (nothing is displayed).

fig.ad-hoc-mode.eps

The unit is in Ad-Hoc mode (p. 9).

About the Other Displays

• Device Name: This displays the device name of this unit that is shown on the application connected via wireless LAN.

• IP Address: This displays the current IP address.

• MAC Address: This displays the MAC address of the wireless USB adaptor.

The MAC address indicated on the bottom of the wireless USB adapter (WNA1100-RL; sold separately).

About the Wireless LAN Function

This method lets you connect by choosing a wireless LAN access point from the list that is displayed.

* Wireless standards 802.11g/n (2.4 GHz) and authentication methods WPA/WPA2 are supported.

1. Call up the REMOTE popup (WIRELESS LAN tab)

Press [SYSTEM] > [F4 (REMOTE)] > [F6 (WIRELESS LAN)] to call up the REMOTE popup (WIRELESS LAN tab).

2. Call up the WIRELESS LAN SETUP popup.

Move cursor to the SETUP button and [ENTER] to call up the WIRELESS LAN SETUP popup.

fig.call-setup-popup.eps

3. Call up the ACCESS POINT SELECT popup

Press [F1 (AP SELECT)] to call up the ACCESS POINT SELECT.

* The currently selected access point is shown in green.

* Press [F4 (REFRESH)] to update the list.

fig.access-point-select.eps

Characters other than single-byte alphanumerics cannot be displayed correctly in the list of access point names.

4. Select the access point

Select the wireless LAN access point that you want to connect to and press [F8 (SELECT)].The unit will start to connect with the

selected access point.

* If you are using this wireless LAN access point for the first time, you will proceed to the authorization (PASS) screen.

* If this is a wireless LAN access point that you have connected to in the past, just press the [F8 (SELECT)] button.

5. Input the security information

Input the security information of the wireless LAN access point (Passphrase) and press [F8 (CONNECT)].

* For details of character input, refer to the owner’s manual of the M-300.

* You cannot input any blank space after the Passphrase.

fig.passphrase-input.eps

Connecting to a Wireless LAN Access Point That You Select (Access Point Select)

About the Wireless LAN Function

What is Ad-Hoc mode?

Ad-Hoc mode lets you connect the M-300 directly to an iPad without using a wireless LAN access point. This is a convenient way

to use the M-300 with an iPad if you are in a location where the wireless LAN access point you normally use is unavailable.

fig.ad-hoc-image-E.eps

Limitation of Ad-Hoc Mode

The antenna in the Wireless USB adaptor is not as powerful as a typical LAN access point. Therefore using a LAN access point gives

the most robust connection.

The iPad connected in Ad-Hoc mode will be unable to communicate with the Internet or with another wireless device. However,

an iPad that has cellular capability will be able to connect to the Internet via the cellular connection.

Please be aware that if you use a cellular connection for Internet connectivity, you may incur costs depending on your rate plan.

1. Call up the REMOTE popup (WIRELESS LAN tab)

Press [SYSTEM] > [F4 (REMOTE)] > [F6 (WIRELESS LAN)] to call up the REMOTE popup (WIRELESS LAN tab).

2. Call up the WIRELESS LAN SETUP popup

Move the cursor to the SETUP button and press [ENTER] to call up the WIRELESS LAN SETUP popup.

fig.call-setup-popup.eps

3. Call up the AD-HOC popup

Press [F3 (Ad-Hoc)] to call up the AD-HOC popup.

fig.AD-HOC-popup.eps

4. Enable the Ad-Hoc mode

Check “Ad-Hoc Mode” to enable it. You can set Ad-Hoc mode channels in [CH]. Normally, switching the channel is not necessary.

Switch the channel if you cannot connect with the current channel.

* Regarding various parameters in this screen, refer to “About Parameters” on next page.

5. Close the AD-HOC popup

Press [F8 (OK)] to finalize the settings and close the popup.

Connecting in Ad-Hoc Mode

iPad (M-300 Remote)

Wireless LAN

M-300

Wireless USB adaptor

(sold separately :WNA1100-RL)

About the Wireless LAN Function

6. Set the Ad-Hoc SSID

On your iPad, Select the Ad-Hoc SSID shown on the AD-HOC popup.

Example: on iPad, choose [Settings] > [Wi-Fi] > [Choose a Network] to select the Ad-Hoc SSID. A password entry screen will

appear; enter the above Ad-Hoc key.

* For details on how to connect to a wireless LAN from an iPad, refer to the iPad owner’s manual.

When you have finished the Ad-Hoc mode connection, restore the iPad settings in [Settings] > [Wi-Fi] > [Choose a Network] to their previous state.

About the Parameters

• Ad-Hoc Mode

Check this to turn on the Ad-Hoc mode.

• SSID

This displays the Ad-Hoc SSID. Ad-Hoc SSID is specified by the value you have set in the [Wireless ID] of the WIRELESS LAN OPTIOIN popup.

• KEY

This displays the Ad-Hoc Key (5 characters).

•CH

This sets the Ad-Hoc mode channel (1 - 11).

1. Call up the REMOTE popup (WIRELESS LAN tab)

Press [SYSTEM] > [F4 (REMOTE)] > [F6 (WIRELESS LAN)] to call up the REMOTE popup (WIRELESS LAN tab)

2. Call up the WIRELESS LAN SETUP popup

Move the cursor to [SETUP] button and press [ENTER] to call up the WIRELESS LAN SETUP popup.

fig.call-wireless-LAN-setup.eps

3. Call up the WIRELESS LAN OPTION popup

Press [F4 (OPTION)] to call up the WIRELESS LAN OPTION popup.

fig.wireless-LAN-option.eps

4. Set the wireless ID

You can set the device name of this unit or the final character of the Ad-Hoc SSID to be shown on the connected application.

Normally, it should be “0”. However, if you are using multiple M-300 units, you can select the wireless ID from 1 to 99. The

corresponding wireless ID and the device ID/Ad-Hoc SSID are as below.

“M-300” (default) when the Wireless ID=0

“M-300-1” when the Wireless ID=1

“M-300-99” when the Wireless ID=99

If you change the Wireless ID, the connection with application (M-300 Remote) is terminated temporarily.

5. Close the popup

Press [F8 (OK)] to finalize the settings and close the popup.

Wireless ID Setting

Andere Handbücher für V-Mixer M-300

Inhaltsverzeichnis

Andere Roland Musikmixer Handbücher

Roland

Roland DJ-2000 Bedienungsanleitung

Roland

Roland Edirol V-8 Bedienungsanleitung

Roland

Roland M-240 Bedienungsanleitung

Roland

Roland VR-400UHD Bedienungsanleitung

Roland

Roland SPD-SX Bedienungsanleitung

Roland

Roland MC-909 Bedienungsanleitung

Roland

Roland MC-808 Bedienungsanleitung

Roland

Roland Edirol M-16DX Bedienungsanleitung

Roland

Roland Groovebox D2 Bedienungsanleitung

Roland

Roland MV-8000 Kurzanleitung

Roland

Roland S-1 Bedienungsanleitung

Roland

Roland M-120 Bedienungsanleitung

Roland

Roland V-Mixer VM-C7200 Bedienungsanleitung

Roland

Roland U-8ST Bedienungsanleitung

Roland

Roland SP-505 Bedienungsanleitung

Roland

Roland V-Bass VB-99 Bedienungsanleitung

Roland

Roland VS-2000 Kurzanleitung

Roland

Roland Edirol M-16DX Gebrauchsanweisung

Roland

Roland V-Mixer M-400 Bedienungsanleitung

Roland

Roland M-160 II Bedienungsanleitung

Roland

Roland M-380 Bedienungsanleitung

Roland

Roland Groovebox MC-505 Bedienungsanleitung

Roland

Roland U-8CW Bedienungsanleitung

Roland

Roland M-160II Bedienungsanleitung

Beliebte Musikmixer Handbücher anderer Marken

Neve

Neve 8816 Bedienungsanleitung

Mackie

Mackie Onyx Analogue Mixer Bedienungsanleitung

Behringer

Behringer EUROPOWER PMP518M Bedienungsanleitung

Peavey

Peavey S-32 Sanctuary Series Bedienungsanleitung

Rane

Rane MP 4 Bedienungsanleitung

True

True T9 Touchscreen Console Bedienungsanleitung

Studiomaster

Studiomaster Air Pro 24 Bedienungsanleitung

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Bedienungsanleitung

Yamaha

Yamaha MR1642 Bedienungsanleitung

Ecler

Ecler MAC40v Bedienungsanleitung

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Bedienungsanleitung

Veeder-Root

Veeder-Root TLS-350 Series Bedienungsanleitung

Alto

Alto APM80.QUAD Bedienungsanleitung

Omnitronic

Omnitronic PM-211 Bedienungsanleitung

SoundCraft

SoundCraft B400 Bedienungsanleitung

CARVIN

CARVIN RX 1200 Bedienungsanleitung

Euphonix

Euphonix MC Mix Bedienungsanleitung

Mackie

Mackie Ultra-34 Bedienungsanleitung