Roland V-Mixer VM-7100 Handbuch

VM-7200/7100 DIF-AT Update Function

DIF-AT Auto-update function

Roland DIF-AT is an interface box to connect Alesis ADAT or

TASCAM DA series and the VM-7200/7100 Processors.

If you connect the DIF-AT and the Processor with the R-BUS

(RMDB2) cable and turn on the power of the Processor, it

detects the version of DIF-AT software, and depending on

the version, Processor may update the DIF-AT software to

the latest version. (Auto-update function)

While updating, ADAT indicator and TASCAM indicator

flash alternatively. And CTRL indicator on the Processor

flashes.

* Be sure not to turn off the power of the Processor,

or disconnect the R-BUS (RMDB2) cable.

fig.1e

Update takes certain time, so please wait. When the update is

completed, both ADAT and TASCAM indicators on the

DIF-AT are lit.

After the update is completed, turn off the power of the

Processor and on again. DIF-AT works on latest version

software.

If update failed

If the power of the Processor turns off or R-BUS (RMDB2)

cable is disconnected accidentally while auto-updating the

DIF-AT, the software is destroyed and the DIF-AT cannot be

operated. Please contact Roland service center or authorized

Roland distributors.

But if you use the VM-C7200/VM-C7100 Console, you can

recover the DIF-AT software by the Console operation.

(Re-update)

1. Connect the Console and the Processor with the

VM-LINK cable.

2. Connect the Processor (DIGITAL MULTI IN/OUT 1–8

connector) and the DIF-AT with the R-BUS (RMDB2)

cable.

fig.2e

3. Turn on the power of the Processor. Please wait until the

flashing CTRL indicator stops and is lit.

4. While holding the [PROJECT] and the [F2] buttons on the

Console, turn on the power of the Console. If the V-Mixer

title appears in the display, release the buttons.

5. When “Press [F1] to Update” appears in the display,

press the [F1] button. Re-update of the DIF-AT starts.

While updating, ADAT indicator and TASCAM

indicator flash alternatively.

* Be sure not to turn off the power of the Processor,

or disconnect the R-BUS (RMDB2) cable.

fig.1e

6. Update takes certain time, so please wait. When the

update is completed, both ADAT and TASCAM

indicators on the DIF-AT are lit. “DIF-AT Updated.

Reboot Please.” appears in the display.

7. After the update is completed, turn off the power of the

Processor and on again. DIF-AT works on latest version

software.

1999. 9, 1st edition

POWER

flash alternatively

DIF-AT

R-BUS (RMDB2)

Processor (VM-7200/7100)

POWER

flash alternatively

Andere Handbücher für V-Mixer VM-7100

Dieses Handbuch passt für folgende Modelle

Andere Roland Musikmixer Handbücher

Roland

Roland PA-200 Bedienungsanleitung

Roland

Roland V-Mixer M-200i Bedienungsanleitung

Roland

Roland Sonar V-Studio VS-700 Bedienungsanleitung

Roland

Roland MC-808 Bedienungsanleitung

Roland

Roland MC-808 Bedienungsanleitung

Roland

Roland M-480 Bedienungsanleitung

Roland

Roland M-480 Montage- und Bedienungsanleitung

Roland

Roland MC-303 Groovebox Bedienungs- und Wartungshandbuch

Roland

Roland SYSTEM-500 531 Bedienungsanleitung

Roland

Roland M-480 Bedienungsanleitung

Roland

Roland A-6 Bedienungs- und Wartungshandbuch

Roland

Roland JX-08 Bedienungsanleitung

Roland

Roland V-Mixer M-400 Gebrauchsanweisung

Roland

Roland M-16E Bedienungsanleitung

Roland

Roland Edirol V-8 Bedienungsanleitung

Roland

Roland M-240R Bedienungsanleitung

Roland

Roland M-380 Bedienungsanleitung

Roland

Roland Groovebox MC-307 Bedienungsanleitung

Roland

Roland M-160 Bedienungsanleitung

Roland

Roland RSS M-300 Bedienungsanleitung

Roland

Roland M-48 Bedienungsanleitung

Roland

Roland VK-7 Bedienungsanleitung

Roland

Roland PA-410 Bedienungsanleitung

Roland

Roland Groovebox MC-307 Bedienungsanleitung

Beliebte Musikmixer Handbücher anderer Marken

Neve

Neve 8816 Bedienungsanleitung

Mackie

Mackie Onyx Analogue Mixer Bedienungsanleitung

Behringer

Behringer EUROPOWER PMP518M Bedienungsanleitung

Peavey

Peavey S-32 Sanctuary Series Bedienungsanleitung

Rane

Rane MP 4 Bedienungsanleitung

True

True T9 Touchscreen Console Bedienungsanleitung

Studiomaster

Studiomaster Air Pro 24 Bedienungsanleitung

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Bedienungsanleitung

Yamaha

Yamaha MR1642 Bedienungsanleitung

Ecler

Ecler MAC40v Bedienungsanleitung

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Bedienungsanleitung

Veeder-Root

Veeder-Root TLS-350 Series Bedienungsanleitung

Alto

Alto APM80.QUAD Bedienungsanleitung

Omnitronic

Omnitronic PM-211 Bedienungsanleitung

SoundCraft

SoundCraft B400 Bedienungsanleitung

CARVIN

CARVIN RX 1200 Bedienungsanleitung

Euphonix

Euphonix MC Mix Bedienungsanleitung

Mackie

Mackie Ultra-34 Bedienungsanleitung