Roland RD-700NX Technisches Handbuch
RD-700NX System Update Version 2.02
This system program updates your RD-700NX to the latest version 2.02.
How to know the version
Before you start, check the system program version of your RD-700NX.
1. Hold down [ V-LINK ] and switch on the power.
2. If this shows the latest version (version 2.02 or later), there’s no need to
update your RD-700NX.
3. After verifying the displayed version, switch off the power.
Update history
[ Ver.2.02 ]
Bug Fix
The following bug is fixed.
● It might rarely not stop sounds on the specified setting and playing
style.
[ Ver.2.00 ]
Additional Functions
● Added Live Sets
● - Fifty new Live Sets, featuring synth sounds that are sure to give you a
distinctive advantage when performing live on stage, have been added
to the Preset bank.
- Thanks to the addition of 100 new slots to the User banks, you can
now save up to 200 Live Sets.
● Available for Roland Wireless Connect ( WNA1100-RL ).
* For more information, refer to "RD-700NX/RD-300NX Version 2 Supplementary
Manual ( RD-700NX_RD-300NX_V200_e01_W.pdf )."
* To view a list of the Live Sets, please refer to "RD-700NX Version 2 Live Set List (
RD-700NX_V200_List_je01.pdf )."
[ Ver.1.04 ]
Bug Fix
● The "System V-Link" and the "System Switch Assign" of System
Exclusive message had been misaddressed.
● The faults were in both RD-700NX itself and the MIDI implementation.
Functionality Improved
© 2012 Roland Corp. U.S.
● Added the parameter "Clock Out" in "System Settings." This parameter
can control ON/OFF settings for transmitting the F8(Timing Clock)
message.
[ Ver.1.03 ]
● Alleviated the feelings of the tone interrupting when performing with
layered tones using combinations of Piano and Strings.
● The following bug is fixed.
○ When receiving the Data Request (RQ1) messages of the
System Exclusive messages, the requested data was not
output.
What you will need to update your RD-700NX
● RD-700NX
● USB Memory ( Roland's M-UF2G is recommended )
* The USB Memory needs to be formatted on a RD-700NX.
● A computer with a USB connector (Windows XP/Vista/7, MacOS X v10.4.3
or later)
● Update file
Cautions with the update
●When you perform this update, it will initialize your Live Set that was saved
in the User bank.
You should save the Live Set on a USB memory before you perform the
update.
Refer to the following section from the Owner's Manual for the detailed
procedure.
○Saving a Live Set File ( LIVE SET Save )
Call up the Live Set from the USB memory after the update completes.
● We recommend that you back up your Live Set files and Songs stored in the
internal memory to a USB memory before you perform the update although
RD-700NX keeps the data with normal updating.
Refer to the following section from the Owner's Manual for the detailed
procedure.
○ Copying a Live Set File ( LIVE SET Copy )
○ Copying a Song (SONG Copy)
● Never apply this update data to any product other than the RD-700NX. This
update data may destroy the data or system program of other products.
●Never power-off your RD-700NX while the update is in progress!
● If a power failure or similar accident occurs during the update process, the
RD-700NX won’t be able to start up in normal operating mode. This will
require servicing, so you will need to contact Roland service center near
© 2012 Roland Corp. U.S.
you if this occurs.
● We regret that we are unable to answer questions regarding the update
procedure using this system program. Please perform the update
responsibly, following the directions given in this document.
Getting the update file
Please open/extract the downloaded “rd700nx_sys_v202.zip” file onto your
computer to get the update files in the “R028_RD700NX” folder.
Procedure for the update
1. Copy the entire folder containing the RD-700NX update data
(R028_RD700NX) to the root directory of the formatted USB Memory and
then detach the device from the computer.
2. Leaving the power to the RD-700NX switched off, connect the USB Memory
to the USB MEMORY port.
3. Hold down [MENU] and [WRITE] and switch on the power to the unit. The
update starts. Wait several minutes. When “Completed.” is displayed, the
operation is finished.
* Never switch off the power or detach the USB Memory
before “Completed.” is displayed. Doing so may damage the USB Memory
and make it unusable.
4. Detach the USB Memory and switch off the power to the unit.
© 2012 Roland Corp. U.S.
Andere Handbücher für RD-700NX
5
Inhaltsverzeichnis
Andere Roland Musikinstrument Handbücher
Roland
Roland 2000 Bedienungsanleitung
Roland
Roland KR-1077 Bedienungsanleitung
Roland
Roland DP990RF Bedienungsanleitung
Roland
Roland Music Atelier AT-45 Bedienungsanleitung
Roland
Roland HP-1 Bedienungsanleitung
Roland
Roland DisCover 5 Bedienungs- und Wartungshandbuch
Roland
Roland Atelier AT90 Bedienungsanleitung
Roland
Roland HP 236 Bedienungsanleitung
Roland
Roland HP 535 Bedienungs- und Wartungshandbuch
Roland
Roland VS-2400CD Handbuch
Roland
Roland FA 08 Benutzerhandbuch
Roland
Roland FR-2 V-Accordion Bedienungsanleitung
Roland
Roland DP-970 Bedienungsanleitung
Roland
Roland FR-3s White Handbuch
Roland
Roland KR-105 Bedienungsanleitung
Roland
Roland MKS-20 Bedienungsanleitung
Roland
Roland RD-100 Bedienungs- und Wartungshandbuch
Roland
Roland RP30 Gebrauchs- und Pflegehandbuch
Roland
Roland HP 1300e Bedienungsanleitung
Roland
Roland G-70 Bedienungsanleitung
